When a linear function is used to model a real

Tangents and Limits
When a linear function is used to model a real world quantity, the slope of the line has an
important interpretation as the rate of change of the quantity. Linear functions are the
simplest types of models, and will apply only to the simplest of situations. Most realistic
quantities are modeled by more complicated functions, whose graph are curves, not lines.
In these situations, the rate of change is also of key importance. How do we calculate
rates of change for situations modeled by non-linear situations? Another way to say this
is: how do we calculate the slope of a curve? This is one of the fundamental questions in
calculus.
Example – If a function models the radius of an oil spill spreading, in a circular pattern,
then the slope of the curve represents the rate at which the oil is spreading.
Example – If a function describes the population of a city as time passes, then the slope
of the curve represents the rate of population growth.
Example – If a function represents the position of a moving person as time passes, then
the slope of the curve represents the velocity of the person.
Example – If a function represents the velocity of a moving person as time passes, then
the slope of the curve represents the acceleration of the person.
Example – If a function represents the overall cost of living as time passes, then the slope
of the curve represents the inflation rate.
Average vs. Instantaneous Rate of Change
If you are asked to find an average rate of change then you simply find the slope between
the two points. This is in effect the slope of the secant line. This is simple using the
y
equation of a slope: msecant 
x
If you are asked to find an instantaneous rate of change then you must find the slope of
the tangent line. This is in effect the slope of the secant line.
Secants? Tangents?
Thinking of this problem mathematically, the rate of change (or slope) of a curve is
always changing. To find the slope at any specific point on a curve would be the
equivalent of finding the slope of the tangent of the curve at that point.
Definition time: a tangent line is a line that touches a curve at one point only (locally).
All we need to do is find the equation of the tangent. How do we do that? We would have
one point but no other information.
We might have to take one step back: we could find an approximate solution by finding
the slope using two points near the specific point (one before and one after). This would
give us an average slope between the two points. If we make the two points get closer and
closer to the specific point we want, we could approximate the slope of the tangent.
Mathematically speaking, this would be finding the slope of the secant of the curve.
Definition time: a secant line is a line that touches a curve at two points.
Average vs. Instantaneous
Remember: The rate of change (or slope) of distance vs. time graphs yield velocity and
the rate of change (or slope) of velocity vs. time graphs yield acceleration.
Returning to the velocity problem, the secant yields an average speed while the tangent
would yield an instantaneous velocity.
Example: The distance an object falls on the surface of the Earth (ignoring friction) can
be found using the equation s(t )  4.9t 2 . If we wanted to use this to find the
instantaneous velocity (slope) at exactly 5 seconds after the object is dropped, we would
y y2  y1

run into trouble with the standard equation: m 
since we only have one
x x2  x1
point. We could find the average velocity using t=5sec and t=6 sec. We can also use
points that are closer and closer together to get a better estimate of the instantaneous
velocity at t=5sec.
Time interval
5t 6
5  t  5.1
5  t  5.05
5  t  5.01
5  t  5.001
Average Velocity
Based on the table we can guess what the instantaneous velocity would be.
Determining the slope of a tangent using secants that approach the tangent more and
more closely is one of the most important ideas in calculus. The numerical method using
tables but one can never be sure that the results obtained from tables of values are valid,
especially for complicated functions. We need to translate this idea into an algebraic
method. This leads to the concept of a limit.
Limits
The Limit of a Function
We may have to discuss the continuity of a function. It may be useful at times to look
closely at points that are discontinuous using limits to determine the exact type of
discontinuity that we are dealing with.
In general, the limit of a function is written lim f ( x)  L , if the values of f ( x ) approach
x a
L more and more closely as x approaches a more and more closely, from either side of a,
but x  a .
Limits are straightforward (and generally quite dull) in continuous functions but there
may be problems when functions are discontinuous. There are three types of
discontinuity: removable, jump, and infinite. There is a discontinuity when the
denominator=0 and there may be a discontinuity when there is a change of equation in
piecewise functions.
To determine a limit at a, make a table of values for x<a with values of x that get closer
and closer to a and repeat with values of x>a with values that get closer and closer to a.
Example: Determine if the limit exists and if so, find its value.
x 1
lim 2
x 1 x  1
Example: Determine if the limit exists and if so, find its value.
x 1
lim 2
x 1 x  1
Example: Determine if the limit exists and if so, find its value.
 x 1
if x  1

lim g ( x) if g ( x)   x 2  1
x 1
 2
if x  1
Example: Determine if the limit exists and if so, find its value.
lim
t 0
t2  9  3
t2
Example: Determine if the limit exists and if so, find its value.
sin x
lim
x 0
x
Example: Determine if the limit exists and if so, find its value.
0 if t<0
lim H ( x) if H ( x)  
x 0
1 if t  0
One Sided Limits
In the previous example, the value of the limit differed depending on which side we were
approaching the point in question.
In general, a left hand limit is written lim f ( x ) and a right hand limit is written as
xa
lim f ( x )
xa
If lim f ( x)  lim f ( x) , then lim f ( x ) does not exist.
x a
xa
x a
If lim f ( x)  L  lim f ( x) , then lim f ( x)  L . (This is true even if f (a)  L .)
xa
x a
xa
Example:
 x  3 if x  , 0

f ( x)    x  2 if x  0, 2 
( x - 2) 2 if x  2,  

Limit Laws
There are rules for limits that can be used to simplify the problem of finding specific
limits for a given equation.
Suppose that the limits lim f ( x ) and lim g ( x) both exist and c is a constant. Then, we
xa
x a
have the following limit laws.
(a) lim c  c
xa
(b) lim x  a
x a
(c) lim  f ( x)  g ( x)   lim f ( x)  lim g ( x)
x a
x a
x a
(d) lim(cf ( x))  c lim f ( x)
xa
xa
(e) lim f ( x) g ( x)  lim f ( x) lim g ( x)
x a
(f) lim
x a
x a
x a
f ( x)
f ( x) lim
 x a
if lim g ( x)  0
x a
g ( x) lim g ( x)
x a

(g) lim  f ( x)   lim f ( x)
n
x a
x a
 if n is a positive integer
n
(h) lim xn  a n
x a
(i) lim n f ( x)  n lim f ( x) if the root on the right side exists
x a
x a
(j) lim x  a if n a exists
n
x a
n
Continuity and Discontinuity
A function f is continuous at a number a if lim f ( x)  f (a) .
x a
This definition of continuity implicitly requires three things:
1. f ( a ) is defined (that is, a is in the domain of f .
2. lim f ( x ) exists (L.H limit=R.H. limit)
xa
3. lim f ( x)  f (a)
x a
Conversely, if a function f is continuous at a number a, then lim f ( x)  f (a) . If a
x a
function has no discontinuities, it is called a continuous function.
Using the properties of limits, it can be shown that many familiar functions are
continuous (such as polynomial, linear functions). Rational functions are constructed
P( x)
from two polynomials; f ( x) 
. These functions are continuous at all points except
Q( x)
where Q( x)  0 . These are points to look at for discontinuities. If these numbers are
excluded from their domains, then the function would be continuous at every number in
their domain.
Discontinuities:
(a) If a function has a removable discontinuity at x=a, then lim f ( x)  L exists,
x a
and the discontinuity can be removed by defining f ( x)  L at the single point
a.
(b) If a function has a jump discontinuity, the function “jumps” from one value to
another.
(c) If a function has an infinite discontinuity at x=a, the absolute values of the
function becomes larger as x approaches a.
Example: Determine if there is a discontinuity. If there is, determine the type of
discontinuity.
x3  x 2  4 x  4
f ( x) 
x2
Example: Determine if there is a discontinuity. If there is, determine the type of
discontinuity.
 0

I   2(5  R)
 R
R  0, 2
R  2,  
Example:
Consider the net worth of a company or business that is experiencing financial difficulty.
The value of the company is decreasing over time until the net worth is less than zero.
Eventually the company declares bankruptcy. At this time, the company’s depts. Are
forgiven, its net worth is zero, and so it has a chance to make a new start. If the new
business is successful, the net worth of the company could rise rapidly. A function that
could be used to model this situation is
 2  2t if t  0, 2
v(t )  
2
(t  2) if t  2,  
Example:
The magnitude of the repulsive force exerted by an electron at the origin on another
1
electron located at position x on the x-axis is f ( x)  2 , provided the force and distance
x
units are chosen appropriately. Determine lim f ( x ) , if it exists.
x 0
The Indeterminate Value Theorem
Suppose that f is continuous on the closed interval [a,b] and let N be any number between
f(a) and f(b), where f(a) does not equal f(b). Then there exists a number c in (a,b) such
that f(c)=N.
Example:
Show that there is a root of the equation y  4 x3  6 x 2  3x  2 between 1 and 2.
More on Limits: Back to Tangents
If a curve has equation y  f ( x) , to find the tangent to the curve at the point P a, f (a) ,
we first consider a nearby point Q x, f ( x)  and compute the slope of the secant PQ.
y f ( x)  f (a)

. Then we let Q approach P along the curve by letting x
x
xa
approach a. If mPQ approaches the number m more and more closely as x approaches a,
we define the tangent to the curve at P to be the line through P with slope m. This process
of calculating a quantity by estimating it, and then making the estimate more and more
accurate until it is exact, is known as determining a limit. In notation of limits, the slope
of a tangent to the graph of y  f ( x) at the point x=a is:
mPQ 
mtangent  lim
xa
f (x)  f (a)
xa
Example:
(a) Find the slope of the tangent to the curve y  x 2  2 x  1 at the point (2,7).
(b) Determine the equation of the tangent in part (a).
(c) Use a graphing calculator or graphing software to graph the function of the
tangent to the graph at (2,7).
An alternative formula for the slope of the tangent to the graph of y  f ( x) is obtained
by labeling the coordinates of points P and Q as P a, f (a)  and Q a  h, f (a  h)  .
The slope of the secant PQ is:
f ( a  h)  f ( a ) f ( a  h)  f ( a )
mPQ 

( a  h)  a
h
As x approaches a, h approaches 0, and the expression for the slope of the tangent
becomes:
mtangent  lim mPQ 
QP
mtangent  lim
h0
f (a  h)  f (a)
h
Example:
(a) Find an equation of the tangent to the curve y 
1
at (2,1).
x 1
(b) Graph the curve and the tangent.
Example: Determining the slopes of several tangents
(a) Find the slopes of the tangents to the curve y  x at the points (1,1), (4,2),
and (9,3).
(b) Describe how the slopes of the curve change as x increases.