Curriculum Vitae
Name :
Birth Place :
USA Residence:
Positions:
Prof. Dr. Said Salah Eldin Hamed Elnashaie
born on 17/10/1947 in Cairo – Egypt.
He is a USA Permanent Resident (Green Card).
 Retired Professor of Chemical Engineering, Cairo
University, Cairo, Egypt ( 1968-1992).
 He was recently the Quentin Berg Chair Professor of
Sustainable Development Engineering, Pennsylvania
State University at Harrisburg, PA, USA (June 2006July 2008)
 At the present time he is:
1- Adjunct Professor, Chemical Engineering
Department, New Mexico Technical University,
Albuqueque, NM, USA.( 2010- )
2- adjunct Professor, Chemical and Biological
Engineering Department, University of British
Columbia, Vancouver, BC, Canada (2006- )
3- Chief Consultant for the R&D section of the
International Trade and Marketing CO., Cairo.
Egypt ( 2010- )
4- Senior consultant for the EEAA( Egyptian
Environmental Abatement Agency) , the CDM (
Clean Development Methodology) projects for the
Gas, Oil and Petrochemicals Section ( 2010- )
Before that he held the following positions:
1- Professor of Chemical Engineering, Cairo University, Egypt (1974 - 1992).
2- Consultant to Fisher Control Branch in Egypt ( 1981-1982 & 1984-1986)
3- Professor of Chemical Engineering, King Saud University, Saudi Arabia (1986 - 1996)
4- Vice-President, Energy & Environmental Services & Systems (EESS). (1997-1999 )
5- Senior Consultant, Chemonics-Egypt. (1996-1999 )
6- Professor of Chemical Engineering, Auburn University Auburn , Alabama , USA.
(January 2000- May 2005)
7- Professor of Chemical Engineering, Chemical and Biological Engineering Department,
University of Brirish Columbia,Vancouver, British Columbia, Canada ( May 2005-June 2006)
8- Dean of the Faculty of Engineering Sciences and Faculty of Information Technology,
University of Sinai, El-Masaeed, El-Arish, N. Sinai , Egypt( August 2008- August 2009)
1
He was also a visiting professor at:
1- Chemical Engineering Department, University of British Columbia (UBC),
Vancouver, BC, Canada, Summer of 1990
2- Chemical Engineering Department, University of New South Wales, Sydney,
Australia, Summer of 1992.
3- Chemical and Biochemical Engineering Departmet, University Putra Malaysia(UPM),
summer of 1996.
4- Chemical and Biological Engineering Department, University of British Columbia
(UBC), Vancouver, BC, Canada, Summer of 2004
Degrees obtained:
1. B.Sc. in Chemical Engineering, Faculty of Engineering, Cairo University, on July 1968
with an honour degree.
2. M.Sc. in Chemical Engineering from the Chemical Engineering Department, Faculty of
Engineering, University of Waterloo, Canada, on May 1971, “Axial Dispersion Model
for Single Adiabtic Bed Reactors Experiencing Catalyst Decay” (Supervisors: Prof. W.H.
Ray and Prof. M. Marek).
3. Ph.D. in Chemical Engineering from the University of Edinburgh, U.K., on October 1973
“Theoretical Studies of the Steady State and Transient Behavior of Catalytic Chemical
Reactors” (supervisors: Prof. P.H. Calderbank and Dr. D.L. Cresswell).
JOURNAL EDITORIALSHIP
 Member of the editorial board of the Journal of King Saud Univ., Engng.
Sci. (1988-1989)
 Member of the editorial board of the Pergamon Press (Elsevier) Journal: “Chaos,
Solitons and Fractals. Applications in Science and Engineering” ( 1991-1996)
 Associate Editor for the Chemical Engineering section in the same Journal
,Chaos, Solitons and Fractals, ( 1996-2001)
 Member of Editorial Advisory Board of the European Journal of Social Sciences
(2005- ).
MAIN FIELDS OF RESEARCH INTEREST:
1. Sustainable engineering and sustainable development.
2. Biofuels and Integrated-biorefineries
3. Novel Processes for the production of clean fuels: Catalytic Production of Hydrogen
and Biocatalytic production of Ethanol.
4. Hydrogen and Syngas Production from Biomass
5. Bio-diesel from biomass
6. Optimum Design of Refineries and Biorefineries.
7. Fixed bed and fluidized bed catalytic reactors in the Petrochemical, Petroleum refining
and Pharmaceutical industries.
8. Catalytic cracking and hydrocracking in the petroleum refining industries
9. Membrane catalytic reactors and bioreactors
10. Investigation of novel reactor configurations for catalytic petrochemical reactions.
11. Biochemical reactors.
12. Enzyme membranes, fermentation processes and wastewater treatment.
13. Bifurcation,instability, chaos and control of chaos in chemical and biochemical
systems.
14. Process control and optimization.
2
15. Development of advanced computer software packages for industrial units and
production lines in the petrochemical, petroleum refining and biochemical
industries.
16. Integration of scientific research and industrial applications through an integrated
system approach.
17. Mathematical modeling of diffusion and reaction in the manufacture and
processing of electronic components.
18. Production of phosphoric acid from phosphate ores.
19. Production of animal feed grade dicalcium phosphate, DCP.
20. Coupling between genetic engineering and bioprocess design for the efficient
production of ethanol and butanol.
21. Environmental engineering .
22. Production of Fuels and other Uesfull products from Animal Waste.
23. In-Process-Modification for waste minimization
JOB HISTORY
1) From July 1974 to July 1979:
During this period I worked as an assistant professor of chemical engineering at the
Chemical Engineering Department, Cairo University, Cairo, Egypt and during this period
I have taught the following undergraduate courses:
1- Chemical Reaction Engineering.
2- Process Dynamics and Control.
3- Organic Chemical Technology.
4- Applied Mathematics for Chemical Engineers.
5- Principles of Chemical Engineering.
6- Design Project for the final B.Sc. year.
And the following postgraduate courses:
1-


Advanced chemical reaction engineering and reactor design (M.Sc.
course).
2Application of digital computers in chemical engineering (M. Sc.
Course).
I have also published a good number of papers (as shown in the list of
publications).
I have also done consultancy work to some industries.
 Promoted to Associate professor on July 1979.
2) From July 1979 to December 1984:
During this period I worked as an associate professor of Chemical Engineering at the
Chemical Engineering Department, Cairo University, Cairo, Egypt and during this period
I have taught the following undergraduate courses:
1. Chemical Reaction Engineering.
2. Principles of Chemical Engineering.
3. Biochemical Engineering.
And the following postgraduate courses:
1.
2.
3.
4.

advanced chemical reaction engineering and reactor design (M.Sc. Course).
Chemical reactors design (Diploma course).
Application of digital computation in chemical engineering (M.Sc. Course).
Applied mathematics for chemical engineers (Diploma course)
I have also published a good number of papers (as shown in the list of
publications) during this pertiod.
3

I have also done consultancy work to some industries.
 Promoted to full professor on December 1984.
3) From December 1984 to August 1992:
1.
2.
3.
4.
5.
During this period, I worked as professor of chemical engineering at the chemical
engineering department, Cairo University, Cairo, Egypt and during this period I have
taught the following undergraduate courses:
Chemical Reaction Engineering.
Principles of Chem. Engng.
Mechanical Unit Operations.
Mass Transfer Unit Operations
Design projects for the final B.Sc. year.
And the following post graduate courses:
1. Advanced chemical reaction engineering and reactor design (M.Sc. course).
2. Chemical reactor design (Diploma course)
3. Applied mathematics for chemical engineers (Diploma course).
 I have also published a good number of papers (as shown in the list of
publications) during this period.
 I have also done consultancy work to some industries.
4) From august 1986 to 1996:
I worked as professor of Chemical Engineering at the Chemical Engineering
Department, King Saud University, Riyadh, Saudi Arabia and during this period I
taught the following undergraduate courses:
1. Computational techniques in chemical engineering.
2. Computerized material and energy balances for process flowsheets.
3. Chem. Engng. Principles.
4. Process control in the chemical industries.
5. Biochemical engineering.
6. Petrochemical industries.
7. Production and processing of Natural Gas.
8. Chemical reaction engineering.
9. Introduction to the petrochemical and petroleum refining industries.
And the following MSc courses:
1. Advanced Chemical Reaction Engineering.
2. Mathematical Modeling and Simulation in Chemical Engineering.
3. Bifurcation, Instability and Chaos in Catalytic Reactors.
 I have also published a good number of papers (as shown in the list of publications).
 I have also did consultancy work to some industries.
 Attracted Funding and participated in a number of large projects as shown later.
1. I have also supervised a number of B.Sc. projects during this perio.
- During this period I have also supervised a number of PhD and Master projects with
Salford University, UK.
- I have also participated in the successful process for ABET accreditation of the Chemical
Engineering Department of King Saud University.
9) From 1997 to 1999 :
- Consultant to a number of universities, research centers and companies in Egypt and
abroad.
- Senior consultant Chemonics – Egypt.
4
- Vice – President, EESS (Energy and Environmental Services and Systems)
10) From the First of January 2000 – to-May 2005 :

-Professor of Chemical Engineering , Auburn University ,Auburn ,Alabama , USA.
During this period I have developed and taught the following courses:
1- CHEN 450: Statistical Process Control ( One quarter)
2- CHEN 3700: Chemical Reaction Engineering ( Five semesters)
3- CHEN 3650: Chemical Engineering Analysis ( Six semesters)
4- CHEN 4160: Process Dynamics and Control ( Four semesters)
5- CHEN 3970-003: Process Dynamics and Control ( One Semester)
6- CHEN 701 (Graduate Course): Chemical Engineering Analysis II ( one quarter)
7- CHEN 8300 (Graduate Course): Advanced Process Dynamics and Control ( two
semesters)
8- CHEN 8600 ( Graduate Course): Non-linear Dynmaics of Chemical and Biochemical
Proceses ( two semesters).
I have also supervised 3 PhD students, each of them has done excellent and published about 25
papers, and one of them co-authored one of my undergraduate books ( Parag Garhyan) and two of
them won the award of the best students in the faculty of engineering at Auburn University( Parag
and Chen) and one of them got nominated to be included in the WHO’s WHO among graduate
students in the USA and won and got included( Parag). Also Parag won the 2004/2005 Carolyn
Carr Outstanding Award Dissertation (PhD) 0n April 2005 from the Sigma Xi Chapter in Auburn
University. The three of them finished their PhD successfully on 2004 and the three of them got
good Jobs( Parag with Pfizer Inc. first, then with Lilly Pharm.Co., Pradeep with the University of
Wisconsin, Madison first and then with a diesel company in Chicago and Chen with the University
of British Columbia, Vancouver, Canada).
During this period I have also been a visiting Professor at University of British Columbia
(UBC) for the summer of 2004.
11) From May 2005- to-June 2006:
Professor Chemical and Biological Engineering Department, University of British Columbia,
Vancouver, Canada
During this period I have taught:
1- CHBE 550: Advanced Reactors Design (Graduate Course).
2- CHBE 456: Catalytic Reactors ( Undergraduate Course)
3- CHBE 444;Mass Transfer Operations ( Undergraduate Course)
And co-supervised, 5 PhD students and 3 Master students, and prepared one successful research
proposal.
12) June 2006-to-July 2008:
Quentin Berg Chair Professor of Sustainable Development Engineering, Pennsylvania State
University at Harrisburg, PA, USA.
During this period I have taught:
1Sustainable Development Engineering
2Environmental Impact Assessment(EIA)
3Hazardous Waste Management
Students Feedback Regarding Teaching of Undergraduate and
Graduate Courses:
I have taught most of the main undergraduate chemical and biochemical engineering courses in a large
number of universities around the world for a wide spectrum of students with different cultures and
scientific backgrounds. In all cases my teaching has been very successful and my relations with my
students have always been excellent scientifically and personally. The students' evaluation of my teaching
5




















has always been excellent and my relations with my students extend over the time and space. All my
colleagues and students confirm that my approach to teaching and simplifying difficult subjects is
excellent. I have also taught a good number of postgraduate courses and the feedback of my students has
always been excellent. In this section I give a sample of students' evaluations/comments for some
undergraduate/graduate courses that I taught at Auburn University.
Sample of students' comments from different courses/classes at Auburn University (2000-2005):
Dr. Elnashaie is one of the best Professors that I have had since my freshman year at Auburn University.
He really made the course interesting and did whatever it took for the students to understand the material.
Dr.Elnashaie was an excellent teacher who showed sincere concern for both the quality of material he
was presenting and the students’ learning experience. I hope to have him again.
This Professor has a very effective teaching style and actually cares about the students learning.
This class has been fun and exciting. He made learning fun for us.
Dr.Elnashaie is one of the most helpful Professors I have had the pleasure to encounter. His door is
always open. He is truly interested in the “learning” aspects of our education.
Dr.Elnashaie is the best chemical engineering professor in the chemical engineering department.
You are a great professor, whom I respect as a person and as a professor.
Dr.Elnashaie was very effective in teaching the class. He always made sure every one felt comfortable
with the material before moving ahead. I enjoyed his teaching style and appreciated his positive attitude
and his enthusiastic nature.
It was a nice change of pace to have a professor that seemed very happy about teaching. Dr.Elnashaie had
a smile on his face & was willing to answer any& every question.
By far the nicest teacher in Chem.Eng.
Dr.Elnashaie is a brilliant professor and imparts that knowledge of the subject matter effectively to the
students.
Dr.Elnashaie exhibits concern for growth of students’ knowledge and is an excellent teacher.
Dr.Elnashaie is a very good instructor and motivates his students to do their absolute best.
Thank you, Dr.Elnashaie. I enjoyed it.
Dr.Elnashaie taught the class very well. He made sure all the material was understood well.
Dr.Elnashaie is dedicated to helping each student learn the course material. He is always helpful when
students have questions or problems.
Dr.Elnashaie is one of the few professors that I have ever had that really cares that the students learn the
material. He is always very helpful and overall is a great teacher.
About Dr.Elnashaie, I only can say that he is an excellent professor and an excellent person as well.
Dr.Elnashaie had a genuine concern for his students’ understanding. He is one of the best chemical
engineering professors I’ve had.
In my view, the lecturer is the model for the academic instructor. He taught me a real graduate course.
The course in general is wonderful.

Teaching and Research at University of British Columbia( May 2005-May 2006 ):
1- Fall 2005: Graduate Course. CHBE 550. Advanced Chemical Reactors. Students evaluation
for both courses: Excellent.
2- Spring 2006:
Undergraduate Course. CHBE 444: Mass Transfer Operations. Students evaluation: Excellent.
Undergraduate Course. CHBE 456: Catalytic Reactors. Students evaluation: Excellent.
The Students have chosen me their best teacher.
Graduate Students at UBC: 5 PhD and 3 Master
6
Projects: Successful Proposal for Tokyo Gas
Departmental and College Committes:
I have been a member of many committes( chaired some of them) in the universities I worked in.
Theses Examination:
I have examined a large number of MSc and PhD thesises in different departments and
universities around the world..
Academic Promotion Committes:
I have been in the academic promotion committes for the promotion of a number
of chemical, mechanical and textile engineering colleagues in a number of
Universities around the world, e.g.: Cairo University, Alexanderia University,
King Saud University, Auburn University, University of Malaya, University of
Waterloo, etc.
REFEREEING :
I have refereed a large number of papers for of the following international journals:
Chemical Engineering Science, AIChE Journal, Industrial and Engineering Chemistry
Research, Canadian Journal of Chemical Engineering Computers and Chemical
Engineering, Journal of Applied Catalysis, Journal of Memberane Science, Chaos,
Solitons and Fractals, Catalysis today, Environmental Science and Technology,
Mathematical and Computer Modeling, Biotechnology Progress, Chemical Reactor
Engineering, etc.
CONSULTANCY
1. I have been a consultant for many international companies and industries.
MEMBERSHIP IN SCIENTIFIC AND PUBLIC ORGANIZATIONS :
123456789101112-
I have beenElected member of the board of directors of the Egyptian Society of
Chemical Engineers, from January 1978 till 1986.
Assistant honorary treasurer of the Egyptian Society of Chemical Engineers, from
March 1978 to March 1979.
Member of the editorial board of the Transactions of the Egyptian Society of Chemical
Engineers from March 1979 till July 1986.
Honorary treasurer of the Egyptian Society of Chemical Engineers from 1979 to
1982.
Elected member of the board of directors of the Cairo University Academic Staff
Members Club (1984-1986).
Honorary treasurer of the Cairo University Staff Members Club from March 1984 to
January 1986.
Member of the committee for the establishment of the Saudi Society of Chem.
Engineers (1988).
Full member of the American Institute of Chemical Engineers (since 1987).
Full member of the Society of Simulation (1986-1990).
Full member of the American Chemical Society (since 1987).
Full member of the American Association for the Advancement of Science, AAAS
(since 1993).
Elected member of the board of directors of The Egyptian Society of Chemical
Engineers ( 2010- )
ORGANIZATION OF CONFERENCES AND SYMPOSIA :
7
12-
3-
4-
Member of the organization committee for the first Egyptian Chemical Engineering
Conference organized by the Egyptian Society of Chemical Engineers, 1984.
Coordinator of the Scientific Committee for the Symposium on: Production and Processing
of Natural Gas, organized jointly by the Chemical and Petroleum Engineering Departments,
King Saud university, 1992.
Coordinator of the committee for the engineering exhibition held in conjunction with the
symposium on : Corrosion and its Protection, organized by the Chemical Engng. Dept. –
King Saud University, 1992.
Viec-chairman of forum 11 on petrochemicals at the 15th World Petroleum Congress,
Beijing, China, October, 1997.
FELLOWSHIP AWARDS
1- Egyptian government undergraduate engineering grant for outstanding students (1963,
1965-1986).
2- NRC (National Research Council of Canada) research grant (1970-1971).
3- University of Edinburgh research fellowship (1971-1973).
4- Start-Up Research budget from Auburn University( 2000-2004).
5- USDA Grant for Waste Water Treatment Research
6- Auburn University Grant for FCC Research.
7- NSF Grant for Research on Biocomplexity
8- Tokyo Gas Grant for Modeling, Simulation and Optimization of Novel Fluidized Bed
Membrane Reformers for Hydrogen Production.
9- Number of US-Egypt grants with NRC and Cairo University ( 2003-2010)
HONOURS:
1- Twentieth century achievement award (five hundred leaders of influence)
American Biographical Institute.
2- Included in “The International Who’s Who of Intellectuals”, International
Biographical Center, Cambridge, England.
3- Certificate of merit and inclusion in vol. XXIV of the Dictionary of International
Biography, Cambridge, England.
4- International Cultural Diploma of Honors, American Biographical Institute.
SUPERVISION OF M.Sc. AND Ph.D. THESES:
I have supervised a number of M.Sc. and Ph.D. thesises in different universities around the world as
shown in the following tables:
TABLE (1) – M.Sc. THESISES THAT HAVE BEEN FINISHED AND THE RESEARCH
STUDENTS OBTAINED THEIR DEGREES
No Name of Research
Student
Title of Thesis
Date of Grad.
1
Nashaat Abdel Hakim.
Studies on the dynamics of counter - current
extractive reactors.
2
Afaf Taha Mahfouz.
Effect of adsorption on the multiplicity of the
steady states and stability in porous catalyst
pellets.
3
Abdel-Ghafour Kafafi.
On the design of fat hydrolysis towers.
1976 Cairo Univ.
4
S.H. El-Bialy.
Dynamic behavior of fluidized bed reactors.
1977 Cairo Univ.
8
1975 Cairo Univ.
1976 Cairo Univ.
5
Ibrahim El-Hennawy.
Multiplicity of the steady states in fluid catalytic
cracking units.
1977 Cairo Univ.
6
Hisham Abou-El-Fath.
Hysteresis and instability in active biological
membranes.
1977 Cairo Univ.
7
Gamil Badra.
Studies on the steady state and dynamic
behavior of enzyme systems.
1978 Cairo Univ.
8 S. Abou-ElEnein.
Dynamic behavior of absorption towers with
chemical reaction.
1980 Cairo Univ.
9 Fawzy Sarhan.
Optimal operation policies for fixed bed dryers.
1980 Cairo Univ.
10 A. H. El-Ahwany.
Modeling of fixed bed reactors for the production
of hydrogen from CO and steam.
1981 Cairo Univ.
11 Gamal Ibrahim.
The effect of substrate inhibition and hydrogen
ions production on the behavior of enzyme
membranes.
1981 Cairo Univ.
12 Fouad Teymour
Mathematical modeling and simulation of the
fixed bed catalytic reactor for the partial oxidation
of o-xylene.
1982 Cairo Univ.
13 S.Abdel Basset
Modeling of non-isothermal
1983, Cairo Univ.
14 Mai Kamal
On the dynamic behavior of the fluidized bed
catalytic reactor for the partial oxidation of Xylene.
Fluidized bed methane steam
reformers with membranes.
S. Abdel Basset. S. Abdel Basset. CSTR for Toluene Nitration
15 Alaa Adris (jointtly with:
Prof. Dr. R. Hughes
chairman of Chem. & Gas
Eng.. Dep. Salford Univ.
16 Soliman El Mahanna.
17 M. E. Abashar (joint
supervision with Prof. Dr.
Hughes)
18 Emad Helal (joint
supervision with Dr. Anis
Fakeeha)
1989 Univ. of Salford
The kinetics and reactor modeling for catalytic
partial oxidation of hydrocarbons.
1990 King Saud Univ.
Modeling and simulation of industrial natural gas
steam reformers and methanators using the dust
gas model.
Compartmental model for the alcoholic
fermentation process in fermenters with
immobilized yeast.
1990 Univ. of Salford.
19 S. Mahros (joint supervision Development of distributed parameter diffusion
model for the sulfuric acid acidulation of Saudi
with Prof. Dr. Hughes)
phosphate rock.
20 Salwa M. R. Ali.
Modeling and simulation of an industrial reactor
for sulfur dioxide oxidation.
21 Ali G. A. Gomaa.
1986 Cairo Univ.
Optimal operation of an industrial ammonia
synthesis converter.
9
1990 Univ. of Salford U.K.
1990 Univ. of Salford U.K.
1992 Cairo Univ.
1992 Cairo Univ.
22 Mohammed B. M.
Preliminary investigation of bifurcation and
Noureldeen (joint
stability in reactor/regenerator systems.
supervision with professors
Hughes and Elshishini)
23
24
1993 Univ. of Salford UK.
W. Hamooda (joint
Investigation of the calcination kinetics of Saudi
supervision with Dr. T. Al- phosphate ore in fluidized bed.
Faris & Dr. F. Abdelaleem)
Hatem Haraz (joint
supervision with
Prof. Dr. Hughes)
1992 King Saud Univ.
Complex non-chaotic attractors and period adding
bifurcation in fluidized bed catalytic reactors.
25 Sharif Alhadad (joint
supervision with prof Dr.
Hughes)
Bifurcation and chaos in an experimental alcoholic
fermenter.
26 Noha Fawzy.
Simulation & optimization of industrial riserreactor FCC unit.
27 Michele Machele
Sustainable Development and Biofuels. Master
1995 Univ. of Salford.
1995 Univ. of Salford.
Cairo Univ.,2000
2008, Penn State
University,USA
TABLE (2) – Ph.D. THESES COMPLETED& STUDENTS OBTAINED THEIR DEGREE
No
4
Name of Research
Student
Title of Thesis
Date of Grad.
1 Shadia Elshishini (joint
supervision with Prof. Dr. M.
A. El-Rifaie)
Analysis of a class of
fluidized bed reactors.
1979 Cairo Univ.
2 Nashat Abdel-Hakeim (joint
supervision with prof. Dr. M.
A. El-Rifaie).
Optimal control policies for
the heterogeneous fixed bed
reactor experiencing catalyst
decay.
1980 Cairo Univ.
3 Soad El-Bialy (joint
supervision with
Prof. M. A. El-Rifaie)
Optimal control policies for
fluidized bed reactors.
1984 Cairo Univ.
Nabila A. Shaaban.
5 Fawzy Sarhan (joint
supervision with Prof. Dr. M.
A. El-Rifaie)
Study of the kinetics of
anaerobic fermentation of
some organic wastes.
The dynamics of
simultaneous heat and mass
transfer in packed beds.
10
1984 Cairo Univ.
1984 Cairo Univ.
6 Afaf Taha Mahfous (joint
supervision with Prof. Dr. S.
S. Elshishini)
Steady state modeling and
simulation of industrial
ammonia synthesis reactor.
1985 Cairo Univ.
7 Ahmed H. El-Ahwany (joint
supervision with Prof. Dr. S.
S. Elshishini)
Modeling and simulation of
the shift converter in AbouQir fertilizers plant.
1986 Cairo Univ.
8 Gamal Ibrahim (joint
supervision with Prof. Dr. S.
S. Elshishini)
Modeling, simulation and
optimization for alcoholic
fermention reactors.
1986 Cairo Univ.
9 Samer Mekhemar.
Modeling and simulation of
portable reverse osmosis
units.
1993 Cairo Univ.
10 Babikr K. Abdalla (joint
supervision with Prof. Dr.
Hughes)
Heterogeneous modeling of
fixed and fluidized bed
reactors without and with
selective membranes for the
catalytic dehydrogenation of
ethyl- benzene to styrene.
1993 Univ. of Salford.
11 Mohammed E. Abashar (joint
supervision with Prof. Dr.
Hughes).
Bifurcation, Instability and
Chaos in fluidized bed
catalytic rectors.
1994 Univ. of Salford
Salwa R. M. Ali.
12
Bifurcation and instability in
fixed bed catalytic reactors
for the partial oxidation of oxylene to phthalic anhydride.
1996 Cairo Univ.
13 Tarek Moustafa.
A novel combined
dehydrogenation
hydrogenation catalytic
reactor with composite
palladium based membranes.
1997 Cairo Univ.
14 Nayef Ghassem (joint
supervision with Prof. Dr.
Hughes).
Bifurcation, control and
optimization of fluidized bed
catalytic reactors for the
production of polyethylene
and polypropylene.
1997 Univ. of Salford
15
Mathematical
Auburn University, 2004
Modeling,Non-linear
Investigation and
Experimental Verification of
Parag Garhyan
11
Biochemical Processes
16 Pradeep Prasad
Circulating Fluidized Bed
Reforming Process for
Hydrogen Production from
Methane
17
A Novel Circulating
Fluidized Bed Membrane
Reformer for Efficient Pure
Hydrogen Production for
Fuel Cells from Higher
Hydrocarbons
Auburn University, 2004
Generalized Models for
Steady State and Dynamic
Modeling of Fluidized Bed
Catalytic Reactors. PhD
University of British
Columbia (UBC),Canada.
Zhongxiang Chen
18 Andres Mahecha-Botero( Cosupervisors:Professors John
Grcae and Jim Lim)
Auburn University, 2004
19 Ibrahim
Hussein
(Co- Modeling of Brainn
spurvisors: Professors: Gamal Choline Neurocycle for
Ibrahim Ali; Ali Kamel)
Simulation of PD and AD.
No
2010
University of
Waterloo,Canada, 2010
Table (3): MASTER AND PHD STUDENTS, REGISTERED, WORKING AND THE
STUDENTS DID NOT OBTAIN THEIR DEGREES YET
Name of Research
Title of Thesis
Expected Date of Grad.
Student
1
Mohamad
Rakib(Co- Development of Circulating Fluidized Bed
supervisors: Professors John Catalytic Steam Reformer.
Grace and Jim Lim)
PhD
2
Nabeel Abou-Geraba( Co- Integrated Dehydrogenation-Hydrogenation
supervisor: Professor John Membrane Autothermic Catalytic Reactor.
Grcae)
PhD
3
Alex
Vensaulas(Cosupervisor: Professor John
Grace)
Multilayer Novel Autothermic
2010, (UBC),Canada
2010, (UBC),Canada
2010, (UBC),Canada
Membrane Reformer.
PhD
4
5
Sarah Badr(Co-supervisors:
Professors: Azza Hafez and
Maaly Kheder and Tarek
Moustafa)
Membrane Separation Modeling and
Experiments.
Maatz
Hydrodynamics of Circulating Fluidized 2010 Cairo University, Egypt
Bellah(
Co-
2010 Cairo University, Egypt
Master
12
supervisors:
Professors:
Shadia Elshishini and Seif
Fateen
Bed(CFB) Membrane Reformer for
Hydrogen Production.
Master
INVITED LECTUERS
1-
23-
45-
I have given a number of invited seminars at: Cairo University and Society of Chemical
Engineers, Egypt as well as King Suad University, Saudi Arabia, Penn State University,
Harrisburg and UP, UPM, Malaysia, UM, Malaysia, Biomass Utilization Center, Penn
State University, UP, University of British Columbia, Canada, University of Western
Ontario, Canada, University of Waterloo, Canada,etc. main subjects:
Digital control of chemical plants.
Computer simulation and optimization of catalytic reactors.
Multiplicity, instability and chaotic behavior in biological system.
Cybernetics in chemical engineering.
Application of chemical engineering principles on the manufacture and processing of
electronic components.
I have given a number of invited lectures at the following Chem. Engng. Departments:
King Fahad Univ. of Petroleum and minerals (KFUPM) – Dahran – Sudi Arabia (1988).
University of British Columbia – Vancouver – B.C. – Canada (1988, 1990, 1999, 2004).
Univ. of Minnesota – Minneapolis – Minnesota – U.S.A. (1988).
Univ. of New Hampshire - Durham - New Hampshire- U.S.A. (1989).
Illinois Institute of Technology – Chicago – Illinois – USA. (1989, 1999).
Univ. of Wisconsin – Madison – Wisconsin – USA. (1989, 1999).
Univ. College London – London – UK. (1990).
Univ. of Saskatchewan – Saskatoon – Canada. (1990, 1994)
King Abdul Aziz Univ. – Jeddah – Saudi Arabia (1992).
Chemical Systems Division, National Laboratory for Industry, MITI, 1-1 Higashi,
Tsukuba 305, Japan (1993).
University of New South Wales, Australia (1994).
University of Malaya – Kuala Lumpur – Malaysia (1994).
Commonwealth Scientific and Industrial Research Organization, CSIRO – Australia
(1994).
Auburn Univ., Alabama, USA (1999).
University of Alabama, Tuscaloosa, USA ( 2003).
University of British Columbia, Vancouver, Canada ( 2004,2006,2007,2008)
University of Westen Ontario, London Ontario, Canada (2004)
Penn State University, Pennsylvania, USA ( 2005,2006)
A number of Argentinian Institutes ( 2007)
A number of Egyptian Research Centers and Engineering companies( 2007-2010)
Invited Lecture and Short Training Course on: Industrial Applications of Bifurcation and
Chaos in Petrochemical, Petroleum Refining and Biochemical Industries, UM , October
2002, KL, Malaysia
Invited Lecture: Novel Fermentor for the Efficient Production of Fuel Ethanol,
International Islamic University of Malaysia(IIUM), October, 2002, KL, Malaysia
Invited lecture: Biochemical and Thermo-chemical Processes Coupling for Integrated Bio
refineries and Sustainable Development, University of British Columbia(UBC),
November, 2008, Vancouver, BC, Canada
13
6-
Invited lecture: Integrated System Approach to Bio-Fuels and Integrated Bio-Refineries,
Global Forum On Green Industry Initiative : "Competitiveness and Innovation through
Green Products and Processes“ , May, 2009, Cairo, Egypt.
7Invited Lecture: Integrated System Approach (ISA) to Sustainable Development, BioFuels and Bio-Refineries , Missouri University of Science and Technology (MUST),
August, 2009, Rolla, USA
8Invited Lecture: Integrated System Approach (ISA) to Sustainable Development (SD) BioFuels(BFs) and Integrated Bio Refineries (IBRs). Towards the First IBR in the Arab
World, Egyptian Business Men Society. December, 2009, Cairo, Egypt.
9Invited Lecture: Development(D); Sustainable Development(SD); Integrated System
Approach(ISA) ; Multi-Disciplinary (MD) Research and Novel Technologies(NTs) Using
Renewable Raw Materials (RRMs), Egyptian Chemical Engineers Society, December,
2009, Cairo, Egypt
10- Invited Lecture : Integrated System Approach (ISA) to Sustainable Development (SD),
Global Warming (GW), Bio-Fuels (BFs) and Integrated Bio-Refineries (IBRs), University
Putra Malaysia (UPM) , January, 2010, Malaysia.
11- Invited Lecture: Three Classes of Membrane Reactors/ Bio-Reactors:
a) Membrane Catalytic Steam Reformers, Dehydrogenation and Integrated Aut-othermal
Reactors
b) Membrane Reactors for Esterification and Trans- Esterification for Production of Bio-diesel
c) Membrane Fermenters for Alcohol Production,
Universiti Putra Malaysia (UPM), January, 2010 , Malaysia.
12- Invited Lecture: Three Classes of Membrane Reactors/ Bio-Reactors:
a) Membrane Catalytic Steam Reformers, Dehydrogenation and Integrated Aut-othermal
Reactors
b) Membrane Reactors for Esterification and Trans- Esterification for Production of Bio-diesel
c) Membrane Fermenters for Alcohol Production,
New Mexico Technical University, January, 2010 , Albuqueque, NM , USA.
Invited Plenary Lectures and Keynote Speaker in International Conferences:
1Invited Plenary lecturer : at the Asian Pacific Chemical Reaction Engineering
2-
3-
45-
67-
Forum (APCRE’96), 26-28 June. (Title of Lecture: Dynamics and Control of Industrial FCC
Units), 1996.
Invited Plenary lecturer : at the 8th International Management of Technology
Conference, Cairo, Egypt, (Tiltle of Lecture: Review of Scientific, Techno-economical and
Managerial Fundamentals), March, 1999.
Invited Plenary Lecturer : at the Regional Symposium on Chemical Engineering,
Petailing Jaya, Malaysia,(Title of Lecture: An Integrated Multidisciplinary Approach for the
Development of Novel Catalytic/Biocatalytic Processes for the Efficient Production of Clean
Fuels). October, 2002 .
Invited Plenary lecturer : at the Qatar University 2nd International Chemistry
Conference (Title of lecture: On Novel Techniques for Efficient Hydrogen Production), 2003
Keynote Speaker : The International Green Energy Conference(IGEC-1), Waterloo,
Ontario, Canada, (Title of Lecture: Efficient Production and Economics of the Clean Fuel
Hydrogen) , June 2005
Keynote Speaker: Chemical Reaction Engineering X: Innovations in
Chemical Reactor Engineering, Mexico, (Title of lecture: Practical Implication of Bifurcation and
Chaos in Chemical and Biological Reaction Engineering), August/September 2005
Invited Plenary Lecture: at the conference: Entrepreneurs in the Shade of Global
14
Trade, Jeddah, Saudi Arabia, (Title of Lecture: Entrepreneurs and Their Role in
Sustainable Development), November, 2009
8Invited Plenary Lecturer: at Egyptian Petroleum Research Institute (EPRI), Cairo,
Egypt, (Title of lecture: Sustainable Development, Global Warming, Bio-Fuels and
Integrated Bio-Refineries), February, 2010
9- Invited Plenary lecture: at the conference for: The Role of Informatics and
Computer Technology ( ICT) in Development Sustainability, Cairo, Egypt, ( Title of lecture:
Integrated System Approach to Informatics, Sustainable Development and Bio-Refineries),
February, 2010
10- Invited Plenary Lecture: at CONGRESO NACIONAL PREPARATORIO BAHÍA
BLANCA CIQyDS 2010“La ingeniería Química y su aporte al desarrollo sostenible”,
CENTRO DE INGENIEROS DE BAHÍA BLANCA – AYACUCHO 732 BAHÍA
BLANCA, Argentina, ( Title of lecture: Integrated Bio-Refineries (IBRs) As
Sustainable Replacements for Petroleum and Petrochemical Industries), April,2010
11-
Invited Plenary lecture: at The International Workshop On Industrial
Biotechnology , The France-Egypt Year Of Science And Technology, 2010 , Egypt , ( Title
of lecture: Linking Sustainable Development To Bio-Fuels, Elementary
Bio-Refineries and Integrated Bio-Refineries), July, 2010
RESEARCH PROJECTS
1- Steam Reforming:
Investigator in a research project dealing with the catalytic steam reforming of
Methane to produce Hydrogen. The research project included catalysis, kinetics and
reactor modeling of this important reaction. The project was financed by King
Abdel Aziz City for Science and Technology (KACST), budget 1.5 million Saudi
riyals ($400,000), project completed on July 1989(Awarded and completed).
2- Production of Phosphoric acid from Saudi Ore:
Investigator in a research project dealing with the production of Phosphoric acid and
the building up of a bench scale and pilot lines for the production of phosphoric acid
including all stages: beneficiation, acidulation, filtration and evaporation. The project
was financed by King Abdul Aziz City for Science and Technology, budget, 2.7 million
Saudi riyals ($ 730 000) and was completed in February 1992.( Awarded and
completed)
3- Oxidative steam reforming and oxidative coupling of methane in fixed and fluidized
beds with and without selective composite membranes: This is a joint research project
between PAPRI-KACST Saudi Arabia and CNR-TAE, Messina – Italy. The project
started September 1995 Total Award Amount:~ $ 200,000.0 ( Awarded and
completed)
4- Start-Up Research Grant, Auburn Univesity, 2000/2005, ( $90,000 + 3
Full Time PhD for 4.5 years). Elnashaie(PI). Total Award Amount
:$400,000.00 ( Awarded and Completed))
5- Modeling of Industrial FCC Units, Competitive Research Grants, Auburn University,
2001/2002, Elnashaie(PI). Total Award Amount: $ 9,902 (Awarded and completed)
6- Environmental Biocomplexity, CO-PI with others, NSF,
September, 2000. Total Award Amount: $ 100,000.00. ( Awarderd and completed)
7- Three Pre-applications to DOE, two of them accepted:
15
a- A Novel Transport Reactor for the Direct Production of Hydrogen
from Biomass ( Accepted)
b- Novel Circulating Fluidized Bed (CFB) Membrane Catalytic Reformer for
the Efficient Production of Pure Hydrogen for Fuel Cells from Renewable
Sources( Accepted)
8- A Pilot Plant Study for Domestic Waste Water Treatment Using Attached/Suspended
Growth Mixed Reactor (HYBRIDE GROWTH SYSTEM). US-Egypt S&T Joint
Board Program. October 2002, Co-operation between Auburn University (USA) and
Menoufia University (Egypt). Auburn University side, Elnashaie (PI). Auburn Budget
$ 19, 5000.00 (Funded). Auburn PI: Elnashaie
9- Modeling and Simulation of Membrane Fluidized Bed Reformer for Hydrogen
Production. March 2006, CDS$45,000
10- Membrane Separation for the textile industry, ASTF, 2007, $50,000
11- Efficient Production of Bio-butanol, ASTF, 2007, $50,000
In –Preparation:
1. Use of nanotechnology for efficient ion-exchange ( in collaboration with NRC,
Egypt)
1. Development of efficient GTL ( Gas-To-Liquid) and STL ( Solid-ToLiquid) process based on FT catalytic processes.
2. Development of hairy roots for production of pharnaceuticals.
3. Bio-diesel from algae
4. Novel process for production of Fisher-Tropsch (FT) bio-diesel
5. Membrane catalytic micro-reactor for tranesterifications and bio-diesel
production.
6.
Novel efficient intefrated process for bio-ethanol from lignocelluloses
wastes.
7.
A new genetically engineering recombinant E-Coli in a novel
membrane immodolized packed bed fermenter for the efficient production
of ethanol.
8. Membrane bio-butanol fermenter
9. There are two joint research projects in co-operation with two external agencies:
a- Catalytic dehydrogenation of LPG (PAPRI-KACST with
Prof. R. Hughes-University of Salford).
b- Catalytic dehydrogenation of ethylbenzene to styrene
(PAPRI-KACST with Prof. Yuan, UNILAB research center
for chemical reaction engineering, Shangahai, P. R. China).
10. Extractive Fermentation for the efficient production of butanol/Acetone.
11. Steady state, dynamic modeling and optimization of industrial FCC units
with different reactor configurations.
12. Bifurcation, instability and chaos in gas-solid catalytic reactors.
13. Bifurcation, instability and chaos in biochemical reactive systems.
14. Modeling simulation and optimization of catalytic fluidized bed
polyethylene and polypropylene reactors.
15. Novel membrane reactors for dehydrogenation of ethyl- benzene to
styrene.
16. Catalyst design, kinetics, reactor modeling and optimization for the
catalytic dehydrogenation and aromatization of LPG.
17. Production of polystyrene using Ziegler-Natta and Mettallocene catalysts.
16
18. Application of fluidized beds to highly endothermic and highly
exothermic reactions (non-oxidative dehydrogenation and partial
oxidation of o-xylene).
19. Steady state and dynamic behavior of complex reaction networks in
fluidized bed reactors (application to partial oxidation of o-xylene to
phthalic anhydride, benzene to maleic anhydride, ethylene to ethylene
oxide).
20. Optimal design and control of polystyrene reactors.
21. Industrial applications of circulating fluidized beds.
22. Control of chaos in catalytic/biocatalytic systems.
23. Coupling between hydrodynamically induced and kinetically induced
instability and chaos in fluidized bed catalytic reactors.
DESIGN OF INDUSTRIAL PLANTS :
1-
2-
I have carried out the entire conceptual design, sizing of equipment and
part of the detailed engineering for a 30000 t/year feed grade DCP plant
for ARASCO (Arabian Agricultural Services Company).
Consultant for the development of a plant for bioethanol production
from rice straw ( three million tons/year)
ENVIRONMENTAL ENGINEERING:
As a senior consultant to Chemonics-Egypt and vice – president of EESS I
have carried out the following environmental studies for the different
sectors of the Egyptian process industry:
1.
Daqahliya environmental profile and environmental action plan: Situation analysis
and industrial pollution abatement plans for Daqahliya Governorate, August 1997.
(Egyptian Environmental Affairs Agency (EEAA), Support for Environmental
Assessment and Management (SEAM).
2.
Environmental Impact Assessment (EIA) for proposed lead plant: relocation,
consolidation and technological upgrade of existing Awadalla secondary lead
smelters, November, 1997. (EEAA and Sharqiya Governorat).
3.
Drain pollution sources study for Eastern, Western, Middle Delta and Fayoum,
January, 1998. (Drainage Research Institute, DRI, Egypt)
4.
Development of an industrial facility Pollution Abatement Action Plan (PAAP) at
El Nasr Company for Coke and Basic Chemicals, June 1998. (EEAA, Egyptian
Pollution Abatement Project (EPAP).
5.
Industrial environmental inspection guidelines, July 1998. (EEAA, Egyptian
Pollution Abatement Project, EPAP).
6.
Evaluation of proposals regarding the completion of Environmental Impact
Assessment (EIA) for Middle East Oil Refinery (MIDOR), July 1998.
7.
Environmental appraisal for the PVC Plant of the Egyptian Petrochemical
Company, August 1998. (The Egyptian Petrochemical Company, EPC, Alexandria,
Egypt).
17
TEACHING AND SUPERVISION OF TRAINING COURSES AND
SUMMER SCHOOLS :
1-
2-
3-
4-
5-
6-
7-
8-
910-
I have given lectures on the design of biochemical reactors in the training course
held at the Egyptian society for chemical engineers under the title “Design of
Chemical Plant Equipment” on May 1978.
I have been invited by the science club of Cairo University to participate in its
scientific camp at the seashore town of Balteem on July 1978 where I gave a
lecture on “Production of Protein from Petroleum Products”.
I have supervised and participated in the training course arranged by the Egyptian
Society for Chemical Engineers and which was held at Cairo Refining Company
on march 1982. The course was entitled “Design of Chemical and Petroleum
Plants Equipment”.
The training was repeated for the same company on June 1985. I participated by
giving a number of lectures on “The Design of Homogeneous and Heterogeneous
Chemical Reactors in the Petroleum Industry”.
I have given an intensive 6 weeks training course to ARECSON engineers on the
steady state, modeling, simulation and optimization of industrial chemical
engineering units (Manama – Bahrain, 1989).
I have given a 3 weeks intensive course to ARECSON engineers on the dynamics
and control of industrial chemical engineering equipment (Manama – Bahrain,
1990).
I have given a one week intensive course organized by DAR – ALTAQNIA to
engineers from SABIC, SAMAREC and ARAMCO on the Modeling Simulation
on Optimization of Catalytic Reactors (Jeddah, 1992).
Given three lectures (on Industrial Applications of Catalysis and Biocatalysis) in
the training course organized by UNIDO and the Egyptian Society for Catalysis
and Surface Chemistry, Cairo, December 1997.
Intensive training courses in a number of Argentinian Institutes, 2007
Training of 100 Iraqi Engineers in Egypt. In collaboration with ERCC and OGS
companies. Cairo 2008/2009
Examples of Recent Workshops on Sustainabel Development:
1. Integrated System Approach to Bio-Fuels and Integrated Bio-Refineries,
Three days , Bio-fuels and Bio-refineries Workshop. New Mexico Technical
University,(NMTU), USA, August 2009
2. Bio-fuels and Bio-refineries Contribution to Sustainable Development, ONE
DAY WORKSHOP at the COLLEGE of ENGINEERING, KING ABDUL AZIZ
UNIVERSITY, JEDDAH, KSA On: November, 2009
VISITING SCHOLAR
I have been a visiting scholar at the following chemical engineering department:
1. Laboratorium voor Petrochemische Techniek – Rijkuniversiteit – Gent – Belgium
(summer, 1987).
2. University of Salford – U.K. (summer, 1998).
3. University of British Columbia – Vancouver – B.C. – Canada (summer, 1990)
18
4.
5.
6.
I have also been invited by MITI of Japan for tow months visit to Japanese Universities
and research centers (1993).
University of New South Wales – Sydney – Australia (summer, 1994).
University of British Columbia – Vancouver – B.C. – Canada (summer, 2004)
PARTICIPATION IN JOINT LECTURES SERIES
-
1. The Joint Saudi-Australia Seminar on “Selected Petrochemical Processes”,
1992: I gave a Lecture on Dehydrogenation Processes.
2. The First Joint Saudi – Japanese Seminar on Biotechnology, Membrane
Separation and Fuel Cells, June, 1994:
- I gave a lecture entitled: “Breaking” thermodynamic Barrier in Membrane Catalytic
Reactors.
- I chaired a session on Membrane Separation.
3. The Second Saudi-Japanese lecture series on “Biotechnology, Membrane
Separation and Catalytic Processes,’’ June, 1995:
I gave two lectures entitled:
a- Oxidative and non-oxidative “breaking” of the thermodynamic
barriers in catalytic dehydrogenation using composite membranes.
b- Optimal design and operation of industrial fluidized bed reactors for
the production of polyethylene and polypropylene using Ziegler-Natta
Catalysts.
- I chaired the session on biotechnology.
4. International Conference on: Knowledge Transfer through Multimedia &
Virtual Reality. Organized by “National Research Center, Egypt” Pacific &
Middle East University, University of Teesside, England and British Council.
- I gave a lectures on: Knowledge Transfer in Focus.
5. Joint Japanese- Sinai University workshop on biofuels, 2008
Patents And Provisional Patents:
1. Adris,A.M., Grace,J., Lim,C. and Elnashaie,S.S.E.H.’ “Fluidized Bed Reaction System
for Steam/ Hydrocarbon Gas Reforming to Produce Hydrogen, US Patent no. 5,326,550
Date: June 5,1994.
2. Adris,A.M., Grace,J., Lim,C. and Elnashaie,S.S.E.H.’ “Fluidized Bed Reaction
System for Steam/ Hydrocarbon Gas Reforming to Produce Hydrogen, Canadian
Patent no. 2,081,170, Date: December 24, 2002
3. Said S.E.H. Elnashaie, Zhongxiang Chen, and Pradeep Prasad, A Novel Circulating
Fluidized Bed Reformer for the Production of Pure Hydrogen for Fuel Cells from Liquid
Hydrocarbons, U.S. Provisional Patent #60,467,072, May 1, 2003.
4. S.S.E.H. Elnashaie and Parag Garhyan Chaotic Fermentation of Ethanol, , United State Full
Patent
#10/978,293
filed
on
10/29/04.
Published
4th
August
2005,
5. Said S.E.H. Elnashaie and Parag Garhyan, A Novel Chaotic Fermentor for the Efficient
Production of Fuel Ethanol , Provisional patent, AUTD# 03-025, 2003
19
6. Said Elnashaie and Pradeep Prasad (2003), Novel Circulating Fluidized Bed Membrane Reformer
Using Carbon Dioxide Sequestration, U.S. Provisional Patent #60/515,882, Filing Date: Oct 30, 2003
PUBLICATIONS
BOOKS AND CHAPTERS :
1.
2.
3.
4.
5.
6.
Elnashaie, Said S.E.H. and Elshishini, S.S., “Modeling, Simulation and
Optimization of Industrial Fixed Bed Catalytic Reactors”, 500 pages, Publisher:
Gordon and Breach Science Publishers, London, UK (December, 1993).
A chapter (87 pages) entitled: “Mathematical Modeling of Diffusion and
Microkinetics in the Processing of Electronic Components”, in a book entitled:
“Catalyzed Direct Reactions of Silicon”, edited by K.H. Lewis and Rethwish –
Publisher: Elsevier (1993).
Elnashaie, S.S.E.H. and Elshishini, S.S. “Dynamic Modeling, Bifurcation and
Chaotic Behavior of Gas-Solid Catalytic Reactors”, 660 pages, Publisher: Gordon
and Breach Science Publishers, London, UK ( July, 1996).
Elnashaie,S.S.E.H. and Garhyan, Parag, “ Conservation Equations and Modeling of
Chemical and Biochemical Systems”, 630 pages, Publisher: Marcel
Dekker,N.Y.,USA (April, 2003)
Elnashaie,S.S.E.H. and Frank Uhlig “Advanced Numerical Techniques with
MATLAB for Chemical and Biochemical Engineers. A Simplified
Bifurcation Colourfull Approach”, Springer,USA, January 2007
Chapter ( 86 pages), Gamal Ibrahim and Said S.E.H.Elnashaie, Bio-hydrogen
Production, Present and Future, Encyclobedia of Hydrogen, in press, 2010.
Books in Preparation:




A book entitled: Integrated System Approach (ISA) to Sustainable Development
(SD), Bio-Fuesl (BFs) and Integrated Bio-Refineries (IBRs)
A book entitled: “System Approach to Chemical and Biological Reaction
Engineering”.
A book entitled: “Membrane Catalytic/Biocatalytic Reactors”.
A book entitled: “Fluid Catalytic Cracking. A Mathematical Modeling Approach”.
PAPERS PUBLISHED IN REFEREED JOURNALS
CONFERENCES WITH REFEREED PROCEEDINGS :
AND
1972:
Journals :
1.
Ray, W.H., Marek, M. and S.S.E.H. Elnashaie “The Effect of Heat and Mass Dispersion
on Tubular Reactor Performance”. Chem. Engng. Sci., Vol. 27, pp. 1527-1536, 1972.
2.
Elnashaie, S.S.E.H. and J.G. Yates, “A Model for Competing Reactions in Gas
Fluidized Beds”. Chem. Engng. Sci., Vol.27,pp.1757-1764, 1972.
Conferences:
3.
Elnashaie, S.S.E.H., Marek, M., and W.H. Ray, “The Effect of Catalyst Deactivation on
th Performance of Dispersed Catalytic Reactors”. Presented at the 2nd International Symposium on
Chemical Reaction Engineering, Amsterdam, 1972.
20
1973:
Journals :
4.
Elnashaie, S.S.E.H. and J. G. Yates, “Multiplicity of the Steady States in Fluidized Bed
Reactors – I. Steady State Considerations”. Chem. Engng. Sci., Vol. 28, pp. 515-520, 1973.
5.
Elnashaie, S.S.E.H. and D.L. Cresswell, “Dynamic Behavior and Stability of Non-Porous
Catalyst Particles”, Chem. Engng. Sci., Vol. 28, pp. 1387-1399, 1973.
6.
Elnashaie, S.S.E.H. and D.L. Cresswell, “On the Dynamic Modeling of Porous Catalyst
Particles”, Canadian Journal of Chemical Engineering, Vol. 51, pp. 201-205, 1973.
Conferences:
7.
Elnashaie, S.S.E.H. and D.L. Cresswell, “Multiplicity of the Steady States in Fluidized
Bed Reactors – II. Dynamic Considerations”, Presented at Fluidization and its Applications
International Congress, Toulouse, October 1973.
1974 :
Journals :
8.
Elnashaie, S.S.E.H. and D.L. Cresswell, “The Influence of Reactant Adsorption on the
Multiplicity and Stability of Stead States of Catalyst Particles”, Chem. Engng. Sci., 29, pp. 753-760,
1974.
9.
Elnashaie, S.S.E.H. and D.L. Cresswell “Dynamic Behavior and Stability of Adiabatic
Fixed Bed Reactors”, Chem. Engng. Sci., Vol. 29, pp. 1889-1900, 1974
1975 :
Journals :
10.
Elnashaie, S.S.E.H. and D.L. Cresswell, “On the Dynamic Modeling of Porous Catalyst
Pellets: Distributed Model”, Chem. Engng. Sci., Vol. 30, pp. 355-358, 1975.
11.
Elnashaie, S.S.E.H., “The Effect of Intraparticle Resistance on the Velocity of Creep in
Adiabatic Fixed Bed Reactors”, Chem. Engng. Sci., Vol. 30, pp. 1297-1299, 1975.
12.
Elnashaie, S.S.E.H. and El-Rifai, M., “Dynamic Analysis and Stability of the Adiabatic
Fixed Bed Reactor”, The Transactions of the Egyptian Society of Chemical Engineers, Vol. 1, No
2, pp. 49-65, 1975.
13.
El-Rifai, M. and Elnashaie, S.S.E.H., “Dynamic Modeling of Porous Catalyst
Particles”., The Egyptian Operations Research Journal, Vol. 2, No 1, pp. 1-16, 1975.
14.
Elnashaie, S.S.E.H. and M. El-Rifai, “Asymmetrical Steady States in Non-Porous
Catalyst Pellets”, Bulletin of the Faculty of Engineering, Cairo University, paper 11, 1975.
15.
Gaber, A.H., El-Rifai, and Elnashaie, S.S., Steady State Multiplicity in Substrate
Inhibited Reactions Conducted in Enzyme Suspensions, Bulletin of Faculty of Engineering, Cairo
University, pp. 1-11, 1975.
16.
El-Rifaie, M.A., Elnashaie, S.S.E.H. and Assal, F.A., “Analysis of Counter current
Tallow-Splitting column., Bull. Faculty of Engineering., Cairo University pp. 1-23, 1975.
Conferences :
17.
El-Rifai, M., Elnashaie, S.S.E.H. and A. Gaber, “Heterogeneous Modeling of Particulate
Immobilized Enzyme Systems”, Colloque International Analyze et Regulation de Systèmes a
Enzymes Immobilisès, Compiègne, France, 1975.
21
18.
Elnashaie, S.S.E.H. and M. El-Rifai, “Modeling of Metabolic and Interaction Population
Systems”, Biomedical Engineering Education in Egypt, AIBS, pp. 85-89, 1975.
19.
El-Rifaie, M. A., Elnashaie, S. and Gaber, A. H., “Optimal Reactivation of Fluidized
Bad Adsorbers”, National Conference on Automatic Control, Cairo, July 5-7, 1975
1977 :
Journals :
20.
Elnashaie, S.S.E.H., “Multiplicity of the Steady in Fluidized Bed Reactors. III-Yield of
the Consecutive Reaction A B  C”, Chem. Engng. Sci., vol. 32, pp. 295-301, 1977.
21.
Elnashaie, S.S.E.H., Gaber, A and M. El-Rifai, “Dynamic Analysis of Enzyme Reactors
Exhibiting Inhibition Multipicity”, Chem. Engng. Sci., vol. 32, pp. 557-559, 1977.
22.
El-Rifai, M., Elnashaie, S.S.E.H. and A. Kafafi, “Analysis of a Counter-current TallowSplitting column”, Trans. Inst. Chem. Engrs. (London), vol. 55, pp. 59-63, 1977.
23.
Elnashaie, S.S.E.H., El-Rifai, M. and M.N. Abdel Hakim, “Effect of Kinetic Regime
and Transport Parameters on the Dynamics of Counter-flow Extractive Reactors” The Transaction
of the Egyptian Society of Chemical Engineers, vol. 3, No. 1, pp. 1-24, 1977.
1978 :
Journals :
24.
Elnashaie, S.S.E.H., El-Rifai, M. and M.N. Abdel-Hakim, “Effect of Kinetic Regime and
Axial Dispersion on the Dynamic Response of Counter Flow Extractive Reactors”, Chem. Engng.
Sci., vol. 33, pp. 847-852, 1978.
25.
Elnashaie, S.S.E.H. and A.T. Mahfouz, “The Influence of Reactant Adsorption on the
Effectiveness Factor of Porous Catalyst Pellets”, Chem. Engng. Sci., vol. 33, pp. 386-390, 1978.
26.
Elnashaie, S.S.E.H., Mahfouz, A.T. and M.N. Saleh, “The Influence of Reactant
Adsorption on the Effectiveness Factor of Porous Catalyst Pellets – Effect of Adsorption”, The
Transaction of the Egyptian Society of Chemical Engineers, vol. 3, No 4, pp. 32-49, 1978.
27.
Elnashaie, S.S., El-Bialy, S.H., El-Ahwany, P. and Ibrahim, G., “Multiplicity, Stability
and Control of the Steady States for Non-isothermal Fluidized Bed Reactors”, Tran. Egy. Soc. Of
Chem. Eng., vol. 4, pp. 35-57, 1978.
Conferences:
28.
El-Rifai, M., Elnashaie, S.S.E.H. and M.N. Abdel-Hakim, “Composition Dynamics and
Control in Counter Flow Extractive Reactors”, Proceedings of the IFAC Conference on System
Approach for Development, American University, Cairo, 1978.
29.
Elnashaie, S.S.E.H. and M. El-Rifai, “A Heterogeneous Model for the Optimal Control of
Fixed Bed Catalytic Reactors Experiencing Catalyst Decay”, Proceedings of the IFAC Conference
on System Approach for Development, American University, Cairo, 1978.
30.
El-Rifaie, M.A., Elnashaie, S.S.E.H., Abou-El-Fatah, H. and Elnasary, M.M.,
“Multiplicity and Hysteresis in Active Biological Membranes Immobilizing Monoenzyme
Distributed Through the Membrane, 6th Int. Conference of Chemical Equip., Design and
Automation, Praha, Czechoslovakia, August, 1978.
31.
Elnashaie, S.S.E.H. and El-Henawi, I.M., Multiplicity of the Steady States in Fluidized
Bed Reactors, CHISA 78, August, Praha, Czechoslovakia, 1978.
32.
El-Henawi, I.M., El-Rifaie, M.A. and Elnashaie, S. S., “Digital Simulation for an (FCC)
Unit”, Processing for the 4th Annual Operational Research Conference, Zagazig University vol. 4,
p.p. 120-135, 1978.
1979 :
22
Journals :
33.
El-Feky, S., Elnashaie, S.S.E.H., El-Rifaie, M. and M.N. Abdel-Hakim, “System
Analysis and Dynamics of Counter Flow Extractive Reactors”, Arab Journal of Nuclear Sciences
and Applications, vol. 12, p.p. 19-35, 1979.
34.
El-Rifai, M., Elnashaie, S.S.E.H., Abou-El-Fath, H. and M. El-Ansary, “Multiplicity and
Memory in Membranes Carrying Mono-Substrate-Inhibited Enzymes”, Journal of Membrane
Science, vol. 5, pp. 339-348, 1979.
35.
Elnashaie, S.S.E.H. and I.M. El-Hennawi, “Multiplicity of the Steady State in Fluidized
Bed Reactors. IV-Fluid Catalytic Cracking (FCC)”, Chem. Engng. Sci., vol. 34, pp. 1113-1121,
1979.
1980 :
Journals :
36.
El-Rifai, M. Elnashaie, S.S.E.H. and H. Abou-El-Fath, “Effect of Feedback Inhibition on
the Behavior of Multienzyme Monolinear Reaction Chains”, Journal of Solid-Phase Biochemistry,
vol. 5, No. 4, pp. 235-243, 1980.
37.
Elnashaie. S.S.E.H. and S. El-Bialy, “Multiplicity of the Steady State in Fluidized Bed
Reactors. V-The Effect of Catalyst Decay”, Chem. Engng. Sci., vol. 35, pp. 1357-1368, 1980.
Conferences :
38.
Elnashaie, S.S.E.H. and S. Elshishini, “Multiplicity of the Steady State in Fluidized Bed
Reactors VI-The Effect of Mixing and Transport Parameters on the Yield of a Consecutive
Exothermic Reaction ABC”,. The 2nd Chemical Congress of North American Continent, San
Francisco, August, 1980.
39.
Elnashaie, S.S.E.H., Elshishini, S. and M. El-Rifai, “”Multiplicity of the Steady States in
Fluidized Bed Reactors. VII-The Effect of Transport and Kinetic Parameters on the Stability and
Controllability of a Complex Reaction”, Proceedings of the IFAC Conference, Rabat, Morocco,
Pergamon Press, pp. 245-249, 1980.
1982 :
Conferences :
40.
Elnashaie, S.S.E.H. and M. N. Abdel-Hakim, “Maximization of Cumulative Yield for
Fixed Bed Catalytic Reactors with Catalyst Deactivation”, International AMSE Conference for
Modeling and Simulation, Paris, vol. 10, pp. 17-31, July 1982.
41.
Ibrahim, G., Zayed, I, Elnnashaie, S.S.E.H. and S. Elshishini, “Asymmetrical Steady
States in Active Enzyme Membranes”, International AMSE Conference for Modeling and
Simulation, Paris, vol. 12, pp. 17-30, July 1982.
1983 :
Journals :
42.
Elnashaie, S.S.E.H., El-Rifai, M. and G. Ibrahim, “The Effect of Hydrogen Ion
Production on the Steady State Multiplicity of Substrate-Inhibited Enzymatic Reactions. I-Steady
State Considerations”, Applied Biochemistry and Biotechnology, vol. 8, pp. 275-288, 1983.
43.
Elnashaie, S.S.E.H., El-Rifai, M., Ibrahim, G. and G. Badra, “The Effect of Hydrogen Ion
on the Steady State Multiplicity of Substrate-Inhibited Enzymatic Reactions. II- Transient Behavior”
Applied Biochemistry and Biotechnology, vol. 8, pp. 467-479, 1983.
Conferences :
44.
Elnashaie, S.S.E.H., Mahfouz, A.T. and S. Elshishini, “The Influence of Reactant
Adsorption on the Effectiveness Factor of Porous Catalyst Pellets. II-Effect of Surface Coverage”,
23
Proceedings of the 9th Annual Operations Research Conference, special issue of the Egyptian
Journal of Operations Research and Applied Statistics, vol. 9, No. 1, pp. 444-461, 1983.
45.
Elnashaie, S.S.E.H. and S. Elshishini, “Multiplicity of the State in Fluidized Bed
Reactors. IX-Selectivity for Competing Reactions”, Proceedings of the International AMSE
Conference for Modeling and Simulation, Nice, vol. 4, pp. 281-295, September 1983.
46.
Abou-El-Enein, Elshishini, S., Zaki, A. and Elnashaie, S.S.E.H., “Dynamic Modeling of
the Multi-Tray Counter-Current Absorption-Reaction Columns. I-Model Development and Transfer
Functions”, Proceedings of the AMSE Conference for Modeling and Simulation, Nice, vol. 4, pp.
265-280, September 1983.
47.
Elnashaie, S.S.E.H., Abdel-Baset, S. and S. Elshishini, “Modeling of the Non-Isothermal
Stirred Tank Reactor for the Nitration of Toluene”, Proceedings of the International AMSE
Conference for Modeling and Simulation, Nice, vol. 4, pp. 197-225, September 1983.
48.
Teymour, F., Elshishini, S. and Elnashaie, S.S.E.H., “Mathematical Modeling and
Simulation of the Fixed Bed Catalytic Reactor for the Partial Oxidation of o-Xylene”, Proceedings
of the International AMSE Conference for Modeling and Simulation, Nice, vol. 4, pp. 227-264,
September 1983.
49.
El-Ahwany,A. Elshishini, S. and Elnashaie, S.S.E.H., “A Heterogeneous Model for the
Simulation of Fixed-Bed Water-Gas Shift Reactor for the Production of Hydrogen in the Fertilizer
Industry”, Proceedings of the International AMSE Conference for Modeling and Simulation, Nice,
vol. 4, pp. 171-196, September 1983.
1984 :
Journals :
50.
Elnashaie, S.S.E.H., Ibrahim, G. and S. Elshishini, “The Effect of Hydrogen Ions on the
Steady State Multiplicity of Substrate-Inhibited Enzymatic Reactions. III-Asymmetrical Steady
States in Enzyme Membranes”, Applied Biochemistry and Biotechnology, vol. 9, pp. 455-475, 1984.
1987 :
Journals :
51.
Elshishini, S.S., Elnashaie, S.S.E.H. and M. El-Rifai, “Multiplicity of the Steady State in
Fluidized Bed Reactors. VIII-Partial Oxidation of o-Xylene”, Computers and Chemical Engineering,
vol. 11, No. 2, 95-100, 1987.
52.
Gaber, A.H. and Elnashaie, S.S.E.H., “A Proposal for a Combined Conveyance Sewage
Treatment Concept. Theoretical Analysis, Scientific Eng. Bulletin, Faculty of Engineering, Cairo
University, vol. 2, pp. 207-221, 1987.
53.
Elnashaie, S.S.E.H., Mahfouz, A.T. and Elshishini, S.S., Steady State Modeling &
Simulation of an Industrial Ammonia Synthesis Reactor. II Effect of Operating Variables, Modeling
Simulation & Control B, AMSE Press, vol. 10, no. 3, pp. 19-38, 1987.
Conferences :
54.
Elnashaie, S.S.E.H., Elshishini, S.S. and A. Zaki, “Multiplicity of the Steady State in
Immobilized Enzyme Systems”, 2nd National Meeting of Chemists, King Saud University, March
1987.
55.
El-Bialy, S.H., Elnashaie, S.S.E.H., and S. Eshishini, “Feed Temperature Control of GasSolid Fluized Bed Experiencing Catalyst Deactivation”, AMSE International 87 Conference on
Modeling and Simulation, Cairo, March 1987.
56.
Elnashaie, S.S.E.H., Elahwany, A. and S.S. Elshishini, “Digital Simulation and
Optimization of an Industrial Shift Converter for the Production of Hydrogen. I-Reactor Modeling
24
and Simulation”, IASTED (International Association of Science and Technology for Development),
International Conference on Simulation, Modeling and Development, Cairo, Egypt, March 1987.
57.
Elnashaie, S.S.E.H., Elahwany, A. and S.S. Elshishini, “Digital Simulation and
Optimization of an Industrial Shift Converter for the Production of Hydrogen. II-Optimization”,
IASTED International Conference on Simulation, Modeling and Development, Cairo, Egypt, March
1987.
58.
Elnashaie, S.S.E.H., and A.S. Al-Ubaid, “Digital Simulation and Optimization of an
Industrial Shift Converter for the Production of Hydrogen. III. A Two-Dimensional Model”,
Proceeding of the 18th Annual Pittsburgh Conference on Modeling and Simulation, Univ. of
Pittsburgh, March 1987, vol. 18, part. 5, p. 1537-1542.
59.
Elnashaie, S.S.E.H., and El-Bialy, S.H. “Optimization of Fluidized Bed Reactors with
Catalyst Decay, I. Pontryogin Maximum Principle” AMSE International Conference on Modeling &
Simulation, Cairo, March, 1987.
1988 :
Journals :
60.
Elnashaie, S.S.E.H., M.E.E. Abashar and A.S. Al-Ubaid, “Simulation and Optimization
of an Industrial Ammonia Reactor”, I & EC Research, 27, 2015-2022, 1988.
61.
Elnashaie, S.S.E.H. and M.N. Abdel Hakim, “Optimal Feed Temperature Control for
Fixed Bed Catalytic Reactors Experiencing Catalyst Deactivation. A Heterogeneous Model”,
Computers and Chem. Engng., 12 (8),787-790, 1988.
62.
Elnashaie, S.S.E.H., A.S. Al-Ubaid, M.A. Soliman and A.M. Adris, “On the Kinetics and
Reactor Modeling for the Steam Reforming of Methane. A Review”, Journal of Engineering
Sciences, vol. 14, No. 2, pp. 247-273, 1988.
63.
Elnashaie, S.S.E.H., A.T. Mahfouz and S.S. Elshishini, “Digital Simulation of an
Industrial TVA Ammonia Reactor”, Chem. Eng. & Processing, vol. 23, No. 3, pp. 165-177, 1988.
64.
Elnashaie, S.S.E.H., and G. Ibrahim, “Heterogeneous Model for the Alcoholic
Fermentation Process”, Journal of Applied Biochemistry & Biotechnology, 19, p. 71-101, 1988.
65.
Soliman, M.A., Elnashaie, S.S.E.H., A.S. Al-Ubaid and A. Adris, “Simulation of Steam
Reformers for Methane”, Chem. Engng. Sci., vol. 43, No. 8, 1988, pp. 1801-1806 (special issue
ISCRE 10, Basel, 1988).
Conference :
66.
Elnashaie, S.S.E.H., Al-Ubaid, A.S., and Soliman, M.A., “Steam Reforming: Kinetics,
Catalyst Deactivation and Reactor Design, Methane Conversion Symposium, Auckland, New
Zealand, April, 1987 (Published in methane conversion, editors; D.M. Bibby, C.D. Chay, R.F. How
and S. Turchock, Elsevier , pp. 89-93, 1988.
67.
Al-Ubaid, A.S., Elnashaie, S.S.E.H. and M.E.E. Abbashar, “The Influence of Support on
the Effective Order of the Steam Reforming of Methane”, Methane Conversion Symposium,
Auckland, New Zealand, April, 1987, [Published in Methane Conversion, Editors: D.M. Bibby, C.D.
Chang, R.F. Howe and S. Yurchack, Elsevier, p. 83-87], 1988
68.
Alhabdan, F. and Elnashaie, S.S.E.H., “Digital Simulation of Industrial Shift Converter
for the Production of Hydorgen. V-Effect of Design and Operating Parameters Using a
Heterogeneous Software Package”, (Presented at the XIX conference – The use of Computers in
Chemical Engineering – CHEMDATA 88 – Goteborg (Sweden) – June 13-15, 1988.
69.
Elnashaie, S.S.E.H., “Some Implications of the Diffusional Limitations on the Behavior
of Immobilized Enzyme Systems”, CHEMDATA 88 – Goteborg – Sweden – June 13-15, 1988.
1989 :
25
Journals :
70.
Elnashaie, S.S.E.H., M.E.E. Abashar and A.S. Al-Ubadi, “Non-monotonic Behavior of
the Effectiveness Factor Along a Catalyst Bed”, Chem. Engng. Sci., vol. 44, No 7, pp. 1581-1585,
1989.
71.
Wagialla, K.M., F.M. Alhabdan, Elnashaie, S.S.E.H. and I.M. Mudallal, “Evaluation of
Alternative Unstructured Kinetic Models for Simulating the Dynamics of the Activated Sludge
Process”, Journal of King Saud Univ., vol. 1, Eng. Sci. (1,2) pp. 3-26, 1989.
72.
Elnashaie, S.S.E.H. and Alhabdan, F., “Mathematical Modeling and Computer
Simulation for an Industrial Water-Gas Shift Converter”, International Journal of Mathematical and
Computer Modeling, Vol. 12, No 8, pp. 1017-1034, 1989.
73.
Elnashaie, S.S.E.H. and Alhabdan, F.M., “A Computer Software Package for the
Simulation and Optimization of Industrial Ammonia Reactors Based on a Rigorous Heterogeneous
Model”, International Journal of Mathematical and Computer Modeling, vol. 12, No. 12. Pp. 15891600, 1989.
Conferences :
74.
Elnashaie, S.S.E.H., Alhabdan, F. and Adris, A., “A Software Package for the Simulation
of Industrial Steam Reformers for Natural Gas”, Inst. Chem. Engrs. (London), Symposium Series
No. 114, 59-67, 1989.
75.
Helal, A. and Elnashaie, S.S.E.H., “Computational Algorithm for the Solution of
Fluidized Bed Reactor Models With Non-Linear Complex Reaction Networks”, Presented at the
European Symposium of Computer Applications in Chemical Industry, Erlangen, 23-26 April 1989,
Dechema-Monographs, vol. 16, VCH Verlagsgesellschaft, pp. 431-442, 1989.
76.
Elnashaie, S.S.E.H. and A. Adris, A.M. “A Fluidized Bed Steam Reformer for Methane”,
Proceedings of the VI International Fluidization Conference, Banff, Canada, May 1989, Eds. J.
Grace, L.W. Shemilt and M.A. Bergougnou, Publisher AICHE, 319-326.
1990 :
Journals :
77.
Elnashaie, S.S.E.H., A. Adris, A.S. Al-Ubaid and M.A. Soliman, “On the NonMonotonic Behavior of Methane Steam Reforming Kinetics”, Chem. Engng. Sci., vol. 45, No. 2, pp.
491-501, 1990.
78.
Elnashaie, S.S.E.H., M.M.K. Fouad and S.S. Elshishini, “The Use of Mathematical
Models to Investigate the Effect of Chemisorption on the Dynamic Behavior of Catalytic Reactors.
Partial Oxidation of o-Xylene in Fluidized Beds”. International J. of Mathematical and Computer
Modeling, vol. 13, pp. 11-21, 1990.
79.
Wagialla, K.M. Elnashaie, S.S.E.H. and A.H. Fakeeha, “Review of Heat Transfer in GasSolid Fluidized Beds”, Journal of Engineering Science, King Saud Univ., vol. 2, pp. 331-346, 1990.
80.
Elshishini, S.S. and Elnashaie, S.S.E.H., “Digital Simulation of Industrial FCC Units.
Bifurcation and it’s Implications, Chem. Engng. Sci., vol. 45, No. 2, pp. 553-559, 1990.
81.
Helal, A. and Elnashaie, S.S.E.H., “Numerical Construction of Bifurcation Diagram for
Non-linear Complex Reaction Networks in Catalytic Reactors.” Computers and Chem. Engng., vol.
14, pp. 691-697, 1990.
82.
Elshishini, S.S. and Elnashaie, S.S.E.H., “Digital Simulation of Industrial FCC Units. IIEffect of Charge Stock Composition on Bifurcation and Gasoline Yield”. Chem. Engng. Sci., vol.
45, pp. 2959-2964, 1990.
83.
Soliman, M. and Elnashaie, S.S.E.H., “Negative Effectiveness Factor for Cyclic
Reversible Reactions”, Chem. Engng. Sci., vol. 45, pp. 1925-1928, 1990.
26
84.
Elnashaie, S.S.E.H., Al-Farris, T.F., Abdul-Razik, S.M. and Ibrahim, A.H., “Investigation
of Acidulation and Coating of Saudi Phosphate Rocks. I. Batch Acidulation”, Ind. & Engng. Chem.
Research, vol. 29, pp. 2389-2402, 1990.
85.
Elnashaie, S.S.E.H., “Mathematical Modeling of Industrial Ammonia Converters – State
of the Art and Recent Developments”, Invited Review Paper Published in Industrial Chemistry
(Yugoslavia), special Issue on the Mathematical Modeling of Ammonia Synthesis Converters, vol.
44, pp. 312-323, 1990.
86.
Elnashaie, S.S.E.H., and K. Wagialla, “Preliminary Investigation of the Fluidized Bed
Configurations for Ammonia Synthesis – A Mathematical Modeling Guided Approach”, Published
in Special Issue of Industrial Chemistry (Yugoslavia) for the Mathematical Modeling of Ammonia
Synthesis Converters, vol. 44. pp. 324-329, 1990.
87.
Elnashaie, S.S.E.H. and Abashar, M.A. “The Implications of the Non-Monotonic
Kinetics on the Design of Catalytic Reactors” Chem. Engng. Sci., vol. 45, pp. 2964-2967, 1990.
Conferences :
88.
Elnashaie, S.S.E.H., M.N. Abdel-Hakim and A.S. Al-Ubaid, “The Influence of
Diffusional Resistances on the Optimal Control of Catalytic Reactors Experiencing Catalyst
Deactivation”, Presented at the Catalysis in Petroleum Refining Conference, 4-8 March, 1989,
Kuwait, Studies in Surface Science and Catalysis, vol. 63, Editors: D.L. Trimm, S. Akashah, M.
Absi Halabi and A. Bishara, Elsevier, pp. 513-533, 1990.
89.
Elnashaie, S.S.E.H., Fakeha, A. and Helal, E., “Computer Simulation for the Alcoholic
Fermentation Process Based on a Heterogeneous Model”, presented at (Com Chem. 90), The Hague,
Netherlands, May , 1990.
1991 :
Journals :
90.
Wagialla, K.M., A.H. Fakeeha, Elnashaie, S.S.E.H. and A.Y. Almaktary, “Modeling and
Simulation of Energy Storage in Fluidized Beds Using the Two-phase Model”, Energy Sources, vol.
13, pp. 189-201, 1991.
91.
Wagialla, KK., Helal, A. and Elnashaie, S.S.E.H., “The Use of Mathematical Models to
Explore the Applicability of Fluidized Bed Technology to Highly Exothermic Reactions. I-Oxidative
Dehydrogenation of Butene”. Mathematical and Computer Modeling, vol. 15 pp. 17-31, 1991.
92.
Elnashaie, S.S.E.H. and Ibrahim. G., “A Distributed Parameter Diffusion-Reaction Model
for the Alcoholic Fermentation Process”, Applied Biochemistry and Biotechnology, vol. 30, pp. 339360, 1991.
93.
Adris, A. Elnashaie, S.S.E.H. and Hughes, R., “A Fluidized Bed Membrane Reactor for
Steam Reforming of Methane”, Canadian J. of Chem. Engng., vol. 69, pp. 1061-1070, 1991.
94.
Wagialla, K.M. and Elnashaie, S.S.E.H., “Fluidized Bed Reactor for Methanol
Synthesis”, Ind. & Engng. Chem. Res., vol. 30, pp. 2298-2308, 1991.
95.
Elnashaie, S.S.E.H. and Wagialla, K.M. and Helal, A., “The Use of Mathematical and
Computer Models to Explore the Applicability of Fluidized bed Technology for Highly Exothermic
Catalytic Reactions. II. Oxidative Dehydrogenation of Ethylbenzene to Styrene”. Mathl. Comput.
Modeling, vol. 15, No. 7, pp. 43-54, 1991.
96.
Elnaschie, M.S. and Elnashaie, S.S.E.H., “The connection between Fluid and
Elastostatical Turbulence”, Mathl. And Comput. Model., vol. 15, pp. 17-23, 1991.
97.
Al-Faris, T.F., Ozbelge, H.O., Elnashaie, S.S.E.H., AbdulRazik, S.M., AbdelAleem, F.A.
and Gassem, N., “Preliminary investigation for the production of Wet-process Phosphoric Acid from
Saudi Phosphate Ores”, Fertilizer Research, vol. 28, pp. 201-212, 1991.
27
98.
Al-Faris, T.F. Elnashaie, S.S.E.H., AbdelRazik, S.M., Abdel Aleem, F.A. and Ibrahim,
H.A., “Comparison Between Acidulation by Sulfuric Acid and by Phosphoric Acid for Saudi
Phosphate Rock”, Fertilizer Research, vol. 29, pp. 209-227, 1991.
Conferences :
99.
Elnashaie, S.S.E.H. and Abashar, M.E., “Optimal Feed Conditions for a class of Gassolid Catalytic Reactions with Non-monotonic Kinetics”, Proceedings of the Third Saudi Conference
on: The Role of Scientific Research in Developing Industry in Kingdom of Saudi Arabia. College of
Engng. KSU, Riyadh, Saudi Arabia, Nov. 24-27, 1991.
100.
Elnashaie, S.S.E.H., Fakeeha, A.H., Helal, E. and Abshar, M.E., Heterogeneous Model
for the Accurate Simulation of Batch Fed-Batch and Continuous Fermentors”, Proceedings of the
Third Saudi Conference on: The Role of Scientific Research in Developing Industry in the Kingdom
of Saudi Arabia. College of Engng. KSU. Riyadh, Saudi Arabia, Nov. 24-27, 1991.
1992 :
Journals :
101.
Elnashaie, S.S.E.H., A. Adris, M.A. Soliman and A.S. Al-Ubaid, “Digital Simulation of
Industrial Methane Reformers”, Canadian J. of Chem. Engng., vol. 70, pp. 786-793, 1992.
102.
Alhabdan, F. M., Abashar, M.A. and Elnashaie, S.S.E.H., “A Flexible Software Package
for Industrial Steam Reformers and Methanators Based in Rigourous Heterogeneous Model”, Mathl.
& Computer Modeling, vol. 16, no 11, pp. 77-86, 1992.
103.
Elshsishini, S.S., Elnashaie, S.S.E.H. and Al-Zahrani, S., “Digital Simulation of
Industrial Fluid Catalytic Cracking Units. III- Effect of Hydrodynamics”, Chem. Engng. Sci., vol.
47, pp. 3152-3156, 1992.
104.
Elnashaie, S.S.E.H., Soliman, M.A., Abashar, M.E., and Almuhanna, S., “On the
Mathematical Modeling of Diffusing and Reaction for Gas-solid Catalytic Systems with Complex
Reaction Networks. Negative Effectiveness Factors”. Mathl. and Comput. Modl., vol. 16, no 12, pp.
41-53, 1992.
105.
Soliman, M.A., Adris, A.M., Al-Ubaid, A.S., Elnashaie, S.S.E.H., “Intrinsic Kinetics of
Nickel / Calcium Aluminate Catalyst for Methane Steam Reforming”, J. Chem. Tech. Biotechnol.,
vol. 55. Pp. 131-138, 1992.
106.
Elnashaie, S.S.E.H., Wagialla, K.M. and Abashar, M.E.E., “The use of Mathematical and
Computer Models to Explore the Advantages of Fluidized Bed Technology for Catalytic Reactions
with Equilibrium / Diffusional Limitations. Ammonia synthesis”, Mathl. And Comput. Modeling,
vol. 16, no 11, pp. 35-47, 1992.
Conferences :
107.
Elnashaie, S.S.E.H., and Almuhana, S., “Effect of Diffusional Resistances on the Rates of
o-xylene partial oxidation over V2O5 Non-porous Catalyst Pellets”. Progress in Catalysis (Elsevier),
vol. 73, pp. 336-342, 1992.
108.
Abbas, M.M. and Elnashaie, S.S.E.H. “Bifurcation and Instability for Bimolecular
Catalytic Reactions on Non-porous Catalyst Pellets”. Progress in Catalsis (Elseviers), vol. 73, pp.
35-43, 1992.
109.
Al-Khowaiter, S., Elshishini, S.S., Elnashaie, S.S.E.H. and Abdalla, B.K., “Intrinsic
Kinetics for the dehydrogenation of Ethylbenzene to Styrene on Promoted Iron-oxide Catalysts”.
Progress in Catalysis (Elsevier), vol. 73, pp. 351-358, 1992.
110.
Elshishini, S.S. and Elnashaie, S.S.E.H., “Digital Simulation of Industrial Fluid Catalytic
Cracking Units. V. Steady state Bhavior of Riser-Reactor Units”, Proceedings of the Int. Conference
on Chemistry in Industry, Bahrain, 14-16 Nov., pp. 779-795, 1992.
28
111.
Elnashaie, S.S.E.H. and Abasaeed, A.E., “A Compartmental Model for the Invstigation of
the Advantages of Selective Membranes on the Performance of Alcoholic Fermentation Process in
Immobilized Packed bed Fermenters”, Proceedings of the Int. Conference on Chemistry in Industry,
Bahrain, 14-16 Nov., pp. 817-831, 1992.
112.
Abdalla, B.K. and Elnashaie, S.S.E.H., “A Fluidized Bed Reactor with Selective
Membranes for the Dehydrogenation of Ethylbenzene to Styrene”, Proceedings of the Int.
Conference on Chemistry in Industry, Bahrain, 14-16 Nov., pp. 833-848, 1992.
113.
Elnashaie, S.S.E.H. and Almuhana, S., “A Heterogeneous Model for the Precise
Simulation of Fixed Bed Catalytic Reactor for Partial Oxidation of o-xylene to Phthalic Anhydride
Using Realistic Complex Reaction Networks”, Proceedings of the Int. Conference on Chemistry in
Industry, Bahrain, 14-16 Nov., pp. 797-815, 1992.
1993 :
Journals :
114.
Elnashaie, S.S.E.H. and Elshishini, S.S., “Digital Simulation of Industrial FCC units. IV.
Dynamic Behavior”, Chem. Engng. Sci., vol. 48, pp. 567-583, 1993.
115.
Elnashaie, S.S.E.H., Alhabdan, F.M. and Elshishini, S.S., “The Vital Role of
Mathematical Modeling in Chemical Engineering Education”. Mathl. and Comput. Modeling, vol.
17, no 3, pp. 3-11, 1993.
116.
Elnashaie, S.S.E.H., and Abashar, M.E., “Steam Reforming and Methanation
Effectiveness Factors Using the Dusty Gas Model Under Industrial Conditions”, Chem. Engng. and
Processing, vol. 32, pp. 177-189, 1993.
117.
Abashar, M.E. and Elnashaie, S.S.E.H., “Mathematical Modeling of Diffusion and
Reaction and Solution Algorithm for Complex Reaction Networks in Porous Catalyst Pellets. Steam
Reforming of Natural Gas”, Mathl. And Comput. Modeling, vol. 18, no 17, pp. 85-100, 1993.
118.
Elnashaie, S.S.E.H., and Elshishini, S.S., “Comparison Between Different Mathematical
Models for the Simulation of Industrial Fluid Catalytic Cracking (FCC) Units”, Mathl. And Compt.
Modl., vol. 18, no 6, pp. 98-110, 1993.
119.
Abasaeed, A.E. and Elnashaie, S.S.E.H., “Heterogeneous Modeling of Packed Bed
Fermenter with Permselective Membranes”, J. of Membrane Science. vol. 76, pp. 165-174, 1993.
120.
Elnashaie, S.S.E.H., Abashar, M.E. and Teymour, F.A., “Bifurcation, Instability and
Chaos in Fluidized Bed Catalytic Reactors with Consecutive Exothermic Chemical Reactions”,
Chaos, Solitons and Fractals, vol. 3, no 1, pp. 1-33, 1993.
121.
Elnashaie, S.S.E.H. and Abashar, M.E., “Precise Modeling of Industrial Steam Reformers
and Methanators Using the Dusty Gas Model”, Latin American Applied Research, vol. 23, pp. 89111, 1993.
122.
Elnaschie, M.S. and Elnashaie, S.S.E.H., “On the connection between fluid and
elastostatical turbulence in Hamiltonian and Flutter sets”, ZAMM. Z. angew. Math Mexh., no. 73,
pp. 182-184, 1993.
123.
Abdalla, B.K. and Elnashaie, S.S.E.H., “A Membrane Reactor for the Production of
styrene from ethylbenzene”, J. Membrane sci., vol. 85, pp. 229-239, 1993.
124.
Elnashaie, S.S.E.H., Abdalla, B. K. and Hughes, R., “Simulation of Industrial Fixed Bed
Catalytic Reactor for the Dehydrogenation of Ethylbenzene to Styrene: Hetrogeneous dusty gas
model”, Ind. Engng. Chem. Res., vol. 32, pp.2537-2541, 1993.
125.
Al-Rariss, T.F. AbdulRazik, S. M., Ghasem, N. M., Abdelaleem, F.A. and Elnashaie,
S.S.E.H., “Computer Program for Mass and Heat Balance Calculations for the Wet Process
Phosphoric acid and its Applications to Saudi Phosphate Rocks”, Fertilizer Research, vol. 35, pp.
169-175, 1993.
29
126.
Abasaeed, A.E. and Elnashaie, S.S.E.H., “A novel Configuration for Packed Bed
Membrane Fermenters for Maximizing Ethanol Productivity and Concentration”, J. Membrane sci.,
vol. 82, pp. 75-82, 1993.
1994 :
Journals :
127.
Abdalla, B.K., Elnashaie, S.S.E.H., Al Khowaiter, S. and Elshishini, S.S., “Intrinsic
Kinetics and Industrial Reactor Modeling for the Dehydrogenation of Ethylbenzene to Styrene on
Promoted Iron Oxide Catalysts”, Applied Catalysis A: General, vol. 113, pp. 88-102, 1994.
128.
Elnashaie, S.S.E.H., and Abashar, M.E., “Chaotic Behavior of Periodically Forced
Fluidized-Bed Catalytic Reactors with Consective Exothermic Chemical Reactions”, Chem. Engng.
Sci., vol. 49, no. 15, pp. 2483-2498, 1994.
129.
Elnashaie, S.S.E.H., Fakeha, A.H., Helal, E. and Abashar, M.E., “A Mathematical Model
Achieving the Twin Objectives of Simplicity and Accuracy for the Simulation of Immobilized Bed
Fermenters”, Mathl. and Comput. Modeling, vol. 19, no. 5, pp. 105-114, 1994.
130.
Abdalla, B.K. and Elnashaie, S.S.E.H., “Catalytic Dehydrogenation of Ethylbenzene to
Styrene in Fixed Bed Membrane Reactor”, AIChEJ, vol. 40, no. 12, pp. 2055-2059, 1995.
1995 :
Journals :
131. Elnashaie, S.S.E.H., Abashar, M.E. and Teymour, F.A., “Chaotic Behavior of Fluidized Bed
Catalytic Reactors with Consecutive Exothermic Chemical Reactions”, Chem. Engng. Sci., vol. 50,
pp. 49-67, 1995.
132.
Abdalla, B.K. and Elnashaie, S.S.E.H., “Fluidized Bed Reactors Without and With
Selective Membranes for the Catalytic Dehydrogenation of Ethylbenzene to Styrene”, J. Membrane
Sci., vol. 10, pp. 31-42, 1995.
133.
Ibrahim, G., Teymour, F.A. and Elnashaie, S.S.E.H., “Periodic and Chaotic Behavior of
Substrate Inhibited Enzymateic Reactions With Hydrogen Ion Production”, Appl. Biochem. &
Biotech., vol. 55, pp. 175-206, 1995.
134.
Elnashaie, S.S.E.H., Abashar, M.E. and Teymour, F.A., “Dynamic Analysis of Fluidized
Bed Catalytic Reactors With Consecutive Exothermic Chemical Reactions. I- Bifurcation
Phenomena”, Dirasat, Univ. of Jordan, vol. 22B, no. 3, pp. 634-649, 1995.
135.
Elnashaie, S. S. E. H., Abashar, M. E. and Teyour, F. A., “Dynamic Analysis of Fluidized
Bed Catalytic Reactors With Consecutive Exothermic Chemical Reactions. II-Chaotic phenomena”,
Dirasat, Univ. of Jordan, vol. 22B, no. 3, pp. 609-633, 1995.
136.
Alhabdan, F.M. and Elnashaie, S.S.E.H., Simulation of an Ammonia Plant Accident
Using Rigorous Heterogeneous Model. Effect of Shift Converters Disturbance on the Methanator”,
Mathl. Comput. Modl, vol. 21, pp. 85-106, 1995.
137.
Elnashaie, S.S.E.H., Ibrahim, G. and Tymour, F.A., “Chaotic Behavior of an
Acetylcholinestrase Enzyme System”, Chaos, Solitons and Fractals, vol. 5, no. 6, pp. 933-954, 1995.
138.
Wagialla, K.M. and Elnashaie, S.S.E.H., “Bifurcation and Comlex Dynamics in Fixed
Bed Catalytic Reactors”, Chem. Engng. Sci., vol. 50, no. 17, pp. 2813-2832, 1995.
139.
Elnashaie, S.S.E.H., Abasaeed, A.E. and Elshishini, S.S., Digital Simulation of Industrial
Fuild Catalytic Cracking Units. V. Static and Dynamic Bifurcation”, Chem. Engng. Sci., vol. 50, pp.
1635-1644, 1995.
140.
Elnashaie, S.S.E.H., and Abashar, M.E., “On the Chaotic Behavior of Forced Fluidized
Bed Catalytic Reactors”, Chaos, Solitons and Fractals, vol. 5, no. 5, pp. 797-831, 1995.
30
141.
Elnashaie, S.S.E.H., Al-Fariss, T.F., Aleem, F.A., Razik, S.M. and Ghasem, N.M.,
“Investigation of Acidulation and Coating of Saudi Phosphate rocks. II- Continuous Acidulation”,
Ind. & Engng. Chem. Res., vol. 34, pp. 4122-4126, 1995.
142.
Abashar, M.E.E. and Elnashaie, S.S.E.H., Parametric Investigation of Industrial
Methanators Using the Dusty gas Model, J. of KSU, vol. pp. 81-100, 1995.
143.
Abdalla, B.K. and Elnashaie, S.S.E.H., “A Modified Model for the Fluidized Bed Reactor
for the Catalytic Steam Reforming of Methane, J. of KSU, vol. 7, pp. 271-282, 1995.
Conferences:
144.
Elnashaie, S.S.E.H., Abashar, M.E. and Alhabdan, F.M., “Development of a Number of
Heterogeneous Models for Catalytic Reactors in the Ammonia Production Line and their Userfriendly Software Packages”, Proceedings of the International Conference on Advances in Strategic
Technologies, 12-15 June, Bangi, Selangor, Malaysia, pp. 71-80, 1995.
145.
Elnashaie, S.S.E.H., Al-Fariss, T.F., Aleem, A., Abdel Razik, S.M. and Ghasem, N.M.,
“Acidulation of Saudi Phosphate Rocks in a Micro Pilot Plant Continuous Unit. Mathematical
Modeling of the Process”, Proceedings of the International Conference on Advances in Strategic
Technologies. 12-15 June Bangi, Selangor, Malaysia, pp. 149-158, 1995.
146.
Elnashaie, S.S.E.H., Almutlaq, A., S.S. Elshishini and Abasaeed, A.E., “Modeling,
Simulation and Bifurcation of Industrial Fluid Catalytic Cracking Units”, Proceedings of the
International Conference on Advances in Strategic Technologies, 12-15 June, Bangi, Selangor,
Malaysia, pp. 19-25, 1995.
147.
Abashar, M.E. and Elnashaie, S.S.E.H., “Bifurcation and Chaos in Fluidized Bed
Catalytic Reactors”, Proceedings of the International Conference on Advances in Strategic
Technologies, 12-15, June Selangor, Malaysia, pp. 61-70, 1995.
148.
Elnashaie, S.S.E.H. and Ghasem, N.M., “Polyethlene Production from Ethylene in a
Fluidized Bed Reactor. I. Static and Dynamic Bifurcation Behavior”, Proceedings of the
International Conference on Advances in Strategic Technologies, 12-15 June, Bangi, Selangor,
Malaysia, pp. 51-60, 1995.
149.
Elnashaie, S.S.E.H., Abashar, M.E., Alhabdan, F.M. and Abdalla, B.K., “Mathematical
Modeling of Si Layers Oxidation and Etching of Si and SiO2 Layers”, Proceedings of the
International Conference on Advances in Strategic Technologies, 12-15 June 1995, Bangi,
Selangor, Malaysia, pp. 110-116, 1995.
150.
Abdalla, B.K., Al-Khowaiter, S.H., Alshishini, S.S., and Elnashaie, S.S.E.H.,
“Maximization of Styrene Yield from Catalytic Dehydrogenation of Ethybenzene”, Proceedings of
the International Conference on Advances in Strategic Technologies, 12-15 June, Bangi, Selangor,
Malaysia, pp. 81-90, 1995.
151.
Abashar, M.E. and Elnashaie, S.S.E.H., “Chaotic Behavior of Fluidized Bed Catalytic
Reactors”, 1st Egyptian-Syrian Chemical Engineering Conference, Suez, Egypt, 2-5 October, pp.
493-502, 1995.
152.
Elnashaie, S.S.E.H., Abashar, M.E., Alhabdan, F.M., and Abdalla, B.K., “User Friendly
Rigorous Heterogeneous Models for the Catalytic Reactors in Ammonia Production Lines”, 1 st
Egyptian-Syrian Chemical Engineering Conference, Suez, Egyptian, 2-5 October, pp. 503-509,
1995.
153.
Elnashaie, S.S.E.H., Abashar, M.E., Alhabdan, F.M. and Abdalla, B.K., “Mathematical
Modeling of Diffusion and Reaction in the Manufacture of Electronic Components”, 1 st EgyptianSyrian Chemical Engineering Conference, Suez, Egyptian, 2-5 October, pp. 384-390, 1995.
154.
Elnashaie, S.S.E.H., and Gasem, N.M., “Bifurcation Analysis of the Industrial UNIPOL
Process for the Production of Polyethylene”, 1st Egyptian-Syrian Chemical Engineering
Conference, Suez, Egyptian, 2-5 October, pp. 78-87, 1995.
31
155.
Elnashaie, S.S.E.H., Almutlaq, S.S., Elshishini, S.S. and Abasaeed, A.E., “Stability
Analysis of Industrial Fluid Catalytic Cracking (FCC) Units”, 1st Egyptian-Syrian Chemical
Engineering Conference, Suez, Egypt, 2-5 October, pp. 401-410, 1995.
156.
Elnashaie, S.S.E.H., Fariss, T., Aleem, A., Abdel Razik, S., Ghasem, N., “Pilot Plant
Testing and Mathematical Modeling for the Continuous Acidulation of Saudi Phosphate ores”, 1 st
Egyptian-Syrian Chemical Engineering Conference, Suez, Egypt, 2-5 October, pp. 674-683, 1995.
157.
Ajbar, A. and Elnashaie, S.S.E.H., “Bifurcation, Instability and Chaos in Fluidized Bed
Catalytic Reactors With Consecutive Exothermic Reactions Under Conventional PID Control”, 1st
Egyptian-Syrian Chemical Engineering Conference, Suez, Egypt, 2-5 October, pp.411-454, 1995.
158.
Abasaeed, A.E. and Elnashaie, S.S.E.H., “Modeling of Fuel-Ethanol Production in a
Novel Packed Bed Membrane Fermenter”, 4th Saudi Engineering Conference, Jeddah, Saudi
Arabia, 5-8 November, pp. 105-110, 1995.
159.
Abasaeed, A.E., Elnashaie, S.S.E.H. and Ghasem, N., and Talib, A.M., “Static and
Dynamic Bifurcations for Ethylene Polymerization in a Fluidized Bed Reactor”, 4 th Saudi
Engineering Conference, Jeddah, Saudi Arabia, 5-8 November 1995.
160.
Abasaeed, A.E., Elnashaie, S.S.E.H., Elshishini, S.S. and Almutlaq, A., “Static and
Dynamic Bifurcation Behavior of an Industrial fluid Catalytic Cracking Unit”, 4 th Saudi
Engineering Conference, Jeddah, Saudi Arabia, 5-8 November, pp. 233-238, 1995.
1996 :
Journals :
161.
Ajbar, A.I. and Elnashaie, S.S.E.H., “Controlling Chaos by Periodic Perturbations in
Non-isothermal Fluidized Bed Catalytic Reactors”, AIChE Journal, vol. 42, no. 11, pp. 3008-3019,
1996.
162.
Abashar, M.E. and Elnashaie, “Existence of Complex Attractors in Fluidized Bed
Catalytic Reactors”, Chemical Engng. Communications, pp. 1-17, 1996.
163.
Elnashaie, S.S.E.H. and Ajbar, A., “Chaotic and Non-Chaotic Strange Attactors and
Bistability in Non-Isothermal Fluidized Bed Catalytic Reactors Under PI Control”, Chaos, Solitons
and Fractals, vol. 7, no. 11, pp. 1955-1967, 1996.
164.
Elnashaie, S.S.E.H. and Ajbar, A., “Period Adding and Chaos in Fluidized Bed Catalytic
Reactors”, Chaos, Solitons and Fractals, vol. 7, pp. 1317-1331, 1996.
1997 :
Journals :
165.
Abashar, M.E., Elnashaie, S.S.E.H and Hughes, R., “Homoclinity in the Dynamics of
Forced Fluidized Bed Catalytic Reactors”, Chaos, Solitons and Fractals, vol. 8, No. 10, 1655-1684,
1997.
166.
Abasaeed, A.E. and Elnashaie, S.S.E.H., “The Effects of External Disturbances on the
Performance and Chaotic Behavior of Industrial FCC Units”, Chaos, Solitons and Fractals, vol. 8,
no. 12, pp. 1941-1955, 1997.
167.
Elnashaie, S.S.E.H., Abasaeed, A. and Ibrahim, G., “On the Practical Revelance of
Bifurcation and Chaos in Chemical and Biochemical Reaction Engineering”, Journal of Fractals, vol.
5, no. 3, pp. 549-560, 1997.
168.
Ibrahim, G. and Elnashaie, S.S.E.H., “Hyperchaos in Acetyl-cholinesterase Enzyme
System”, Chaos, Solitons & Fractals, vol. 8, no. 12, pp. 1977-2007, 1997.
32
169.
Ali, E. and Elnashaie, S.S.E.H., “Non-linear Model Predictive Control of Industrial Type
IV Fluid Catalytic Cracking (FCC) Units for Maximum Gasoline yield”, Ind. & Eng. Chem. Res.,
vol. 36, pp. 389-1007, 1997.
170.
Abashar, M.E. and Elnashaie, S.S.E.H., Complex Non-Chaotic attractors in Fluidized
Bed Catalytic Reactors, Trans. IchemE, vol. 75, part 1, pp. 92-100, 1992.
171.
Alhumazi, K. and Elnashaie, S.S.E.H., “Effect of Control Loop Configuration on the
Bifurcation Behavior and Gasoline Yield of Industrial Fluid Catalytic Cracking (FCC) Units”,
Mathl. and Comput. Model., vol. 25, no. 3, pp. 37 – 56, 1997.
Conferences:
172.
Elnashaie, S.S.E.H. and Abashare, M.E., “Bifurcation and Chaotic Behavior of Industrial
Fluid Catalytic Cracking Units”, Asia-Pacific Chemical Reaction Engineering Form (APCRE’ 96),
Bijing, China, June 1996.
173.
Abdalla, B.K, Alkhwaiter, S.M., Elshishini, S.S., Elnashaie, S.S.E.H., “Maximization of
Styrene Yield from Catalytic Dehydrogenation of Ethylbenzene in Fixed and Fluidized bed
Configurations with and without selective Membranes”. 15th World Petroleum Congress, forum 11,
Petrochemicals, Bijing, China, October 1997.
174.
Abasaeed, A.E. and Elnashaie, S.S.E.H., Periodicity and aperiodicity in externally forced
industrial FCC units”, Proceddings of the International CFIC 96 Conference, Fractals and Chaos in
Chemical Engineering, Editors, Giona, M. and Biardi, G. World Scientific, pp. 489-499, 1997.
175.
Ajbar, A. Alhumaizi, K. and Elnashaie, S.S.E.H., Chaotic behavior of a None-isothermal
Fluidized bed Catalytic Reactor under Conventional. PID Control”, Proceedings of the International
CFIC 96 Conference, Fractals and Chaos in Chemical Engineering, Editors, Giona, M. and Biardi,
G., World Scientific, pp. 500-511, 1997.
176.
Elnashaie, S.S.E.H., Ghasem, N.M. and Hughes, R., “Bifurcation and its Implications on
Industrial UNIPOL Process for the Production of Polyethylene in Fluidized Bed Catalytic Reactors”,
Proceedings of the International CFIC 96 Conference, Fractals and Chaos in Chemical Engineering,
Editors, Giona, M. and Biardi, G. world scientific, pp. 530-541, 1997.
177.
Wagialla, K.M. and Elnashsie, S.S.E.H., “Bifurcation behavior of Industrial Fixed Bed
Catalytic Reactors for the Production of Phthalic Anhydride”, Proceedings of the International CFIC
96 Conference, Fractals and Chaos in Chemical Engineering, Editors, Giona, M. and Biardi, G,
world scientific, pp. 688-699, 1997.
178.
Abshar, M.E., Elnashaie, S.S.E.H. and Ibrahim, G., “Efficient Computer Algorithm for
the Design of Industrial Steam Reformers”, Proceedings of the 2nd International Conference on the
Applications of Numerical Methods in Engineering, UPM Press, Serdang, Malaysia, 23-25 June, pp.
76-85, 1997.
179.
Abashar, M.E., Elnashaie, S.S.E.H., and Ibrahim, G., “Efficent Computer Algorithm for
the Computation of Lyapunov Exponents: Identification of Chaotic and Non-chaotic Strange
Attactors in Fluidized Bed Catalytic Reactors”, Proceedings of the 2nd International Conference on
the Applications of Numerical Methods in Engineering, University Putra Malaysia (UPM) Press,
Serdang, Malaysia, 23-25 June, pp.293-302, 1997.
1999 :
Conferences:
180.
Moustafa, T.M., Ashour, I. And Elnashaie, S.S.E.H., An Integrated Dehydrogenation –
hydrogenation Membrane Reactor for the Simultaneous Production of Styrene and Cyelohexane,
International Symposium on Reaction Kinetics and Development of Catalytic Processes, Brugge,
Belgium. April 19 – 21, 1999.
33
181.
Elnashaie, S.S.E.H., Ibrahim, G., Abashar, M.E., El Shishini, S.S., Moustafa, T., Nayef,
M. and Abaseed, A.E., Practical Implications of Bifurcation and Chaos in the Process Industry, 8 th
International Conference on Management of Technology, Cairo, Egypt,Organized by the
International Association for Management of Technology, IAMOT, USA, March 15-17, 1999.
182.
Elnashaie, S.S.E.H., El-Zanaty, E. and Eissa, S., “Towards an Egyptian Plan for Critical
Technologies. R&D for Advanced Materials”, 8th International Conference on Management of
Technology, Cairo, Egypt, Organized by the International Association for Management of
Technology, IAMOT, USA, March 15-17, 1999
183.
Elnashaie, S.S.E.H., and Hafez, S., “Cost Effective Approach to Industrial pollution
abatement. The Minimum Pollution Maximum Production (MPMP) Approach”, 8th International
Conference on Management of Technology , Cairo, Egypt, Organized by the International
Association for Management of Technology, IAMOT, USA, March, 15-17, 1999
184.
Hassan, S. and Elnashaie, S.S.E.H., “A Technology Management Plan for the
Development of the Egyptian Fine Chemical Industry”, 8th International Conference on
Management of Technology, Cairo, Egypt, Organized by the International Association for
Management of Technology, IAMOT, USA, March 15-17, 1999
185.
Elshishini, S.S., Elnashaie, S.S.E.H., and Kamal, D., “Hazardous Waste Management.
The Pharmaceutical Industry”, 8th International Conference on Management of Technology, Cairo,
Egypt , Organized by the International Association for Management of Technology, IAMOT, USA, ,
March 15-17, 1999
186.
Elnashaie, S.S.E.H., El Zanaty, E. and Eissa, S., “A Multidisciplinary Integrated System
Approach to Accelerated Industrial Application of Research Findings. From Laboratory Experiments
to Industrial Applications in the Pharmaceutical Industries”, 8th International Conference on
Management of Technology, Cairo, Egypt, Organized by the International Association for
Management of Technology, IAMOT, USA, March 15-17, 1999
187.
Elnashaie, S.S.E.H. and Gaber, A., “Education Management in a Technologically
Changing World. Efficient information / Knowledge Transfer: Quantity and / or Quality”, 8th
International Conference on Management of Technology, Cairo, Egypt, Organized by the
International Association for Management of Technology, IAMOT, USA, March 15-17, 1999
2000
Journals:
188- Elnashaie,S.S.E.H., Moustafa,T., Alsoudani,T., Elshishini,S.S., Modeling and Basic
Characteristics of Novel Integrated Dehydrogenation-Hydrogenation Membrane Catalytic Reactors,
Computers and Chemical Engineering, 24, pp.1293-1300, 2000
189-Moustafa,T.M.and Elnashaie,S.S.E.H., “ Simultaneous Production of Styrene and Cyclohexane
in an Integrated Membrane Reactor”, Journal of Membrane Science, 178, pp. 171-184, 2000
190- Moustafa,T.M., Fahmy, M., and Elnashaie,S.S.E.H., “Applications of Mathematical and
Computer Models for the Evaluation of Novel Catalytic Reactors”, Dev.Chem.Mineral Processing,
8(5/6), pp 571-586,2000
2001 :
Journals:
191-Elnashaie,S.S.E.H., Harraz, H.M. and M.E. Abashar, “Homoclinical Chaos and Period-Adding
Route to Complex Non-Chaotic Attractors in Fluidized Bed Catalytic Reactors”, Chaos, Solitons and
Fractals,12, pp.1761-1792, 2001
34
192.Elnashaie,S.S.E.H.,Abdallah,B.K.,Elshishini,S.S.,Alkhowaiter,S.,Noureldeen,M.B.and
Alsoudani,T., “ On the Link Between Intrinsic Catalytic Reaction Kinetics and the Development of
Catalytic Processes. Catalytic Dehydrogenation of Ethylbenzene to Styrene”, Catalysis
Today,64,2001,pp.151-162
Conferences:
193- Elnashaie,S.S.E.H., “ Recent Development for the Implementation of Pollutrion Prevention&
Cleaner Production: An Overview”, Pollution Prevention& Cleaner Production Workshop, March
17-19, 2001, Hilton Dreams-Sharm El-Sheikh, Egypt
194- Elnashaie,S.S.E.H., “Ultra Clean Fuels and Cleaner Technologies. Emphasis on Chemical&
Metal Industries”, Pollution Prevention& Cleaner Production Workshop, March 17-19, 2001, Hilton
Dreams-Sharm El-Sheikh, Egypt
195-Elnashaie,S.S.E.H., “ Life Cycle Analysis and Limited Life Cycle Analysis”, Pollution
Prevention& Cleaner Production Workshop, March 17-19, 2001, Hilton Dreams-Sharm El-Sheikh,
Egypt.
2002 :
Journals:
196-Pradeep Prasad and Said Elnashaie, Novel Circulating Fluidized Bed Membrane Reformer
for the Efficient Production of Ultra Clean Fuels from Hydrocarbons, Industrial and Engineering
Chemistry Research, 41, 6518-6527, 2002
Conferences:
197- Zhongxiang Chen, Pradeep Prasad, and Said Elnashaie, “The Coupling of Catalytic Steam
Reforming and Oxidative Reforming of Methane to Produce Pure Hydrogen in a Novel
Circulating Fast Fluidization Bed Membrane Reformer”, 223rd ACS National Meeting, Orlando,
April 2002.
198- Pradeep Prasad and Said S.E.H. Elnashaie, Novel Membrane Circulating Fluidized Bed
Reformer for the Efficient Production of Hydrogen from Natural Gas, 14th World Hydrogen
Energy Conference, Montreal, Canada, 2002
199- Pradeep Prasad and Said S.E.H. Elnashaie , Hydrogen Production from Natural Gas using
a Novel Membrane Circulating Fluidized Bed Reformer, Regional Symposium on Chemical
Engineering (RSCE) and 16th Symposium of Malaysian Chemical Engineers (SOMChE), Kuala
Lumpur, Malaysia,2002
200- Pradeep Prasad and Said S. E. H. Elnashaie, Novel Membrane Circulating Fluidized Bed
Reformer For The Efficient Production Of Hydrogen From Natural Gas, 14 th World Hydrogen
Energy Conference (WHEC) 2002, Montreal, Canada, June 2002
201-Pradeep Prasad, Zhongxiang Chen, and Said S.E.H. Elnashaie, Carbon Dioxide
Sequestration to Improve the Performance of a Novel Circulating Fluidized Bed Membrane
Steam Reformer, AIChE 2002 Annual Meeting, Indianapolis, Indiana, November 3-8, 2002.
202- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Using Coking and Decoking
Model in a Circulating Fast Fluidized Bed Membrane Reformer for Efficient Production of Pure
Hydrogen by Steam Reforming of Higher Hydrocarbons, Proceedings of the Regional
Symposium on Chemical Engineering (RSCE 2002) and the 16th Symposium of Malaysian
Chemical Engineers (SOMChE 2002), p1239-1247, Kuala Lumpur, Malaysia, October 28-30,
2002
203- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Modeling, Simulation and
Optimization for Hydrogen Production from Heptane in a Novel Membrane Reformer,
Proceedings of the Regional Symposium on Chemical Engineering (RSCE 2002) and the 16th
35
Symposium of Malaysian Chemical Engineers (SOMChE 2002), p1475-1482, Kuala Lumpur,
Malaysia, October 28-30, 2002.
204- Zhongxiang Chen, and Said S.E.H. Elnashaie, Efficient Production of Hydrogen from
Higher Hydrocarbons using Novel Membrane Reformer, 14th World Hydrogen Energy
Conference, Montreal, Canada, June 9-13, 2002
205- Zhongxiang Chen, Pradeep Prasad, and Said Elnashaie, The Coupling of Catalytic Steam
Reforming and Oxidative Reforming of Methane to Produce Pure Hydrogen in a Novel
Circulating Fast Fluidized Bed Membrane Reformer, Fuel Chemistry Division Preprints, 47(1),
p111-113, ACS National Meeting, Orlando, FL, April 7-11, 2002
206- Parag Garhyan and Said S.E.H. Elnashaie, Multidisciplinary Research to Develop Novel
Technologies for the Efficient Production of Fuel Ethanol from Lignocelluloses Waste,
Presented at the International Conference on Fiber Industry and Environmental Bio-complexity,
Auburn, AL, January 2002
207- Parag Garhyan, Said S.E.H. Elnashaie and A. Mahecha-Botero, Modeling, Investigation
and Usefulness of the Complex Behavior of an Ethanol Fermentor Producing Fuel Ethanol from
Lignocelluloses Wastes, Regional Symposium of Chemical Engineers (RSCE 2002) in
conjunction with 16th Symposium of Malaysian Chemical Engineers (SOMChE 2002), October
2002 at Kuala Lumpur, Malaysia, 2002
208- Parag Garhyan, Said S.E.H. Elnashaie and A. Mahecha-Botero, Modeling and
Investigation of the Bifurcation/Chaotic Behavior of Acetylcholinestrase Enzyme and its
Possible Link to Alzheimer/Parkinson Diseases, Regional Symposium of Chemical Engineers in
conjunction with 16th Symposium of Malaysian Chemical Engineers, October 2002 at Kuala
Lumpur, Malaysia, 2002
2003:
Journals:
209- Zhongxiang Chen, Pradeep Prasad, Yibin Yan, and Said S.E.H. Elnashaie, Simulation for
Steam Reforming of Natural Gas with Oxygen Input in a Novel Membrane Reformer, Fuel
Processing Technology, 83(1-3), p235-252, 2003.
210- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Non-monotonic Behavior of
Hydrogen Production from Higher Hydrocarbon Steam Reforming in a Circulating Fast
Fluidized Bed Membrane Reformer, Industrial & Engineering Chemistry Research, 42(25),
p6549-6558, 2003.
211- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Novel Circulating Fast
Fluidized Bed Membrane Reformer for Efficient Production of Hydrogen from Steam Reforming
of Methane, Chemical Engineering Science, 58(19), p.4335-4349, 2003
212- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Modeling and Optimization of a
Novel Membrane Reformer for Higher Hydrocarbons, AIChE J., 49(5), p1250-1265, 2003
213- Parag Garhyan Said S.E.H. Elnashaie, S.A. Haddad, G. Ibrahim and S.S.
Elshishini, Exploration and Exploitation of Bifurcation/Chaotic Behavior of a
Continuous Fermentor for the Production of Ethanol, Chemical Engineering
Science, 58(8), 1479-1496, 2003
214- Pradeep Prasad and Said Elnashaie, Coupled Steam and Oxidative Reforming for
Hydrogen Production in a Novel Membrane Circulating Fluidized Bed, Industrial and
Engineering Chemistry Research, 42, 4715-4722, 2003
Conferences:
215- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Study of Carbon Deposition
and Gasification for Steam Reforming of Heptane In A Novel Membrane Reformer, The
International Hydrogen Energy Forum 2003, Beijing, P.R.China, October 20-24, 2003
36
216- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Non-monotonic Behavior of
Hydrogen Production by Steam Reforming of Heptane in a Novel Membrane Reformer, The
International Hydrogen Energy Forum 2003, Beijing, P.R.China, October 20-24, 2003
217- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Carbon Deposition and
Hydrogen Production from Higher Hydrocarbons in a CFB Membrane Reformer, NHA 14th
Annual Meeting, Washington D.C., March 4-6, 2003
218-Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Novel Circulating Fluidized Bed
Membrane Reformer-Regenerator System for the Production of Hydrogen for Fuel Cells from
Heptane, Proceeding of the AIChE 2003 Annual Meeting, San Francisco, USA, 2003.
219-Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Hydrogen Production in a Novel
CFB Membrane Reformer and Catalyst Deactivation and Engineering Control, Proceeding of
the AIChE 2003 Annual Meeting, San Francisco, USA, 2003.
220- Parag Garhyan, Said S.E.H. Elnashaie and Andres Mahecha-Botero , Computational
investigation of the bifurcation/chaotic behavior of ACh neurocycle and its link to
Alzheimer/Parkinson Diseases. The 13th Annual Research Forum at Auburn University, at
Auburn, AL, USA, March 2003
221- Said S.E.H. Elnashaie, Parag Garhyan and Andres Mahecha-Botero Bifurcation/Chaotic
Behavior of Acetylcholine Neurocycle and Alzheimer/Parkinson Diseases. Bifurcations: The
Use and Control of Chaos, at Southampton, UK, 28-30 July 2003
222- Said S.E.H. Elnashaie, Parag Garhyan and Andres Mahecha-Botero Complex Chaotic
Behavior of Ethanol Fermentor Producing Fuel Ethanol. Bifurcations: The Use and Control of
Chaos, at Southampton, UK, 28-30 July 2003
223- Parag Garhyan, Said S.E.H. Elnashaie and Sangeeta Garhyan, Use of mathematical
modeling and non-linear analysis for efficient production of bio-ethanol.226th ACS National
Meeting, at New York, USA, September 2003
224- Parag Garhyan Said S.E.H. Elnashaie and Pradeep Prasad, Practical Relevance of
Bifurcation and Chaos to the Design and Operation of Ethanol Fermentors. 2nd International
Conference on Chemistry and its Applications, Qatar, December 2003
225- Parag Garhyan Said S.E.H. Elnashaie and Pradeep Prasad, Computational Investigation
of Bifurcation/Chaotic Behavior of Acetylcholine Neurocycle. 2nd International Conference on
Chemistry and its Applications, Qatar, December 2003
226- Parag Garhyan, Said S.E.H. Elnashaie and Sangeeta Garhyan Use of mathematical
modeling and non-linear analysis for efficient production of bio-ethanol. 226th ACS National
Meeting, 43(2), 289-295, 2003
227- Pradeep Prasad and Said Elnashaie, Novel Circulating Fluidized Bed Membrane Steam
Reformer: Comparison of Co-current and Countercurrent Membrane Operation, 14th Annual
U.S. Hydrogen Meeting of the National Hydrogen Association, Washington D.C, 2003
228- Andrés Mahecha-Botero, Parag Garhyan, S.S.E.H. Elnashaie, Modelling, bifurcation and
chaotic behavior of a coupled acetylcholinesterase/choline acetyltransferase enzymes
neurocycle, Oral presentation, Institute of Physics Seminar, University of Antioquia, Medellín,
Colombia. Dec. 15, 2003
2004:
Journals:
229- Pradeep Prasad and Said Elnashaie , Novel Circulating Fluidized Bed Membrane Reformer
using Carbon Dioxide Sequestration, Industrial and Engineering Chemistry Research, 43, 494501, 2004
230-Zhongxiang Chen, and Said S.E.H. Elnashaie, Steady-State Modeling and Bifurcation
Behavior of Circulating Fluidized Bed Membrane Reformer-Regenerator for the Production of
37
Hydrogen for Fuel Cells from Heptanes, Chemical Engineering Science, 59(18), p3965-3979,
2004.
231- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Catalyst Deactivation and
Engineering Control for Steam Reforming of Higher Hydrocarbons in a Novel Membrane
Reformer, Chemical Engineering Science, 59(10), p1965-1978, 2004.
232- Zhongxiang Chen, and Said S.E.H. Elnashaie, Bifurcation Behavior and Efficient Pure
Hydrogen Production for Fuel Cells a Using Novel Auto-thermal Membrane Circulating
Fluidized Bed (CFB) Reformer: Sequential De-bottlenecking and the Contribution of John
Grace, Industrial & Engineering Chemistry Research, 43, pp. 5449-5459, 2004
233- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Hydrogen Production
and Carbon Formation during the Steam Reforming of Heptanes in a Novel Circulating
Fluidized Bed Membrane Reformer, Industrial & Engineering Chemistry Research
43, p1323-1333, 2004
234- Parag Garhyan and Said S.E.H. Elnashaie, Utilization of Mathematical Models to
Investigate the Bifurcation and Chaotic Behavior of Ethanol Fermentors, Mathematical and
Computer Modelling, 39(4-5), 381-427, 2004( top 25 papers in the Journal, no.9).
235- Parag Garhyan and Said S.E.H. Elnashaie, Static/Dynamic Bifurcation and
Chaotic Behavior of and Ethanol Fementor, Industrial &Engineering Chemistry
Research, 43(5), 1260-1273, 2004
236- Andres Mahecha-Botero, Parag Garhyan and Said S.E.H. Elnashaie, Bifurcation and
chaotic behaviour of a coupled acetylcholinesterase/choline acetyltransferase diffusion-reaction
enzymes system,Chemical Engineering Science, 59(3), 581-597, 2004
237- Parag Garhyan and Said S.E.H.Elnashaie, Bifurcation Analysis of Two Continuous
Membrane Fermentor Configurations for Producing Ethanol, Chemical Engineering Science, 59,
pp 3235-3268, 2004
238- Said S.E.H. Elnashaie, Mohamed, N.F. and Mai Mohammad, Implications of
Bifurcation/Chaos on the Design, Operatrion and Control of Industrial Riser- Reactor FCC Units,
Chem.Eng.Communications, 191, pp. 813-831, 2004
239- Said Elnashaie and Parag Garhyan, “Bio-ethanol Production-Solving the Efficiency
Bottleneck” The Chemical Engineer (tce), 755, May Issue, pp.30-32, 2004
240-Said Elnashaie and Faisal Abdelhady, “The Hydrogen Efficiency and Beyond” The
Chemical Engineer (tce), 760, October Issue, pp.33-34, 2004
Conferences:
241-Zhongxiang Chen, and Said S.E.H. Elnashaie, Novel Auto-thermal Reforming Process for
Pure Hydrogen Production, 7th International Conference of Chemical Engineering, Cairo,
Egypt, December 27-29, 2004
242-Zhongxiang Chen, and Said S.E.H. Elnashaie, Co-current and Counter-Current Operations
for Steam Reforming of Heptanes in a Novel CFB Membrane Reformer, 7th International
Conference of Chemical Engineering, Cairo, Egypt, December 27-29, 2004
2005:
Journals:
243- Andres Mahecha-Botero, Parag Garhyan and Said S.E.H. Elnashaie, Bifurcation,
Stabilization and Ethanol Productivity Enhancement for a Membrane Fermentor, Mathematical
and Computer Modelling, Vol.41,issues 4/5,pp.391-406, 2005
244- Andrés Mahecha-Botero, Parag Garhyan, S.S.E.H. Elnashaie, “Modeling, bifurcation and
chaotic behaviour of a coupled acetylcholinesterase/choline acetyltransferase enzymes
neurocycle”. Mathematical and Computer Modelling, Vol. 41, issues 6/7, pp.655-678, 2005
38
245- Said Elnashaie, Pradeep Prasad and Zhongxiang Chen, Static Bifurcation
Characteristics of an Auto-thermal Circulating Fluidized Bed Hydrogen Generator for Fuel
Cells, Industrial & Engineering Chemistry Research, Vol. 44, pp.4871-4883, 2005
246- Parag Garhyan and Said Elnashaie, Experimental Investigation and
Confirmation of Static/Dynamic Bifurcation Behavior in a Continuous Ethanol
Fermentor. Practical Relevance of Bifurcation and the Contribution of Harmon Ray,
Industrial & Engineering Chemistry Research, Vol. 44, pp.2525-2531, 2005
247- Zhongxiang Chen, and Said S.E.H. Elnashaie, Optimization of Reforming
Parameter and Configuration for Hydrogen Production, AIChE J., 51(5),
P1467-1481, 2005.
248- Zhongxiang Chen, and Said S.E.H. Elnashaie, Bifurcation and Its Implications for a Novel
Auto-thermal Circulating Fluidized Bed Membrane Reformer for the Efficient Pure Hydrogen
Production, Chemical Engineering Science, 60(15), p4287-4309, 2005.
249- Zhongxiang Chen, and Said S.E.H. Elnashaie, Economics of the Clean
Fuel Hydrogen in a Novel Auto-thermal Reforming Process, Industrial &
Engineering Chemistry Research, 44(13), p4834-4840, 2005.
250- Said Elnashaie and Andrés Mahecha-Botero, “Towards Understanding Alzheimer’s and
Parkinson’s”, the chemical engineer (tce), 770, pp.29-31, 2005
251- Chen, Z. and Elnashaie, S.S.E.H., “Bifurcation Behaviour During the Hydrogen
Production in Two Compatible Configurations of a Novel Circulating Fluidized Bed Membrane
Reformer”, Chemical Engineering Research and Design, 83(A6), pp. 679-685, 2005
252- Chen, Z. and Elnashaie, S.S.E.H., “Auto-thermal CFB Membrane Reformer for
Hydrogen Production from Heptanes”, Chemical Engineering Research and Design, 83(A7),
pp. 893-899, 2005
253- John R. Grace, Said Elnashaie and Jim Lim, Hydrogen Production in Fluidized Beds with
In-Situ Membranes, International Journal of Chemical Reactor Engineering, Vol.3, Article A41,
pp.1-17 , 2005
Conferences:
254- Andrés Mahecha-Botero, John R. Grace, C. Jim Lim, S.S.E.H. Elnashaie, “A generalized
dynamic model for fluidized-bed reactors for the efficient production of pure hydrogen”.
Session: H2 and Fuel Cells, 7th World Congress of Chemical Engineering, Glasgow, UK, 2005
255- Andrés Mahecha-Botero, Parag Garhyan, S.S.E.H. Elnashaie, Bifurcation and chaotic
behavior of the acetylcholine diffusion-reaction enzymes neurocycle, Session:Healthcare, 7th
World Congress of Chemical Engineering, Glasgow, UK 2005
256- Andrés Mahecha-Botero, Parag Garhyan, S.S.E.H. Elnashaie, Non-linear characteristics of
a membrane fermentor for the efficient production of fuel ethanol, 7th World Congress of
Chemical Engineering, Glasgow, UK , 2005
257-Pradeep Prasad and Said Elnashaie, Hydrogen production in a circulating fluidized bed
reformer: effect of different techniques for breaking thermodynamic equilibrium, 7th World
Congress of Chemical Engineering (WCCE 2005), Glasgow, Scotland, United Kingdom, July
10-14, 2005
258-Pradeep Prasad and Said Elnashaie, Innovative circulating fluidized bed design for hydrogen
production: static bifurcation characteristics, 7th World Congress of Chemical Engineering
(WCCE 2005), Glasgow, Scotland, United Kingdom, July 10-14, 2005
259- Andrés Mahecha-Botero, John R. Grace, C. Jim Lim, S.S.E.H. Elnashaie, Comprehensive
modelling of gas fluidized-bed reactors allowing for transients, multiple flow regimes and
selective removal of species, CRE X conference, Innovations in Chemical Reactor Engineering”,
Zacatecas, Mexico. August 28 to September 2, 2005
39
260- Andrés Mahecha-Botero, John R. Grace, C. Jim Lim, S.S.E.H. Elnashaie, FEMLAB
simulations using a comprehensive model for gas fluidized-bed reactors, FEMLAB Conference”,
Boston, USA, October 2005
261-Pradeep Prasad and Said Elnashaie, Circulating Fluidized Bed Reformer-Regenerator
System for Hydrogen Production from Methane, International Green Energy Conference (IGEC1), Waterloo, Ontario, Canada, June 12-16, 2005
262-Zhongxiang Chen, and Said S.E.H. Elnashaie, Auto-thermal CFB Membrane Reformer for
Pure Hydrogen Production for Fuel Cells from Heptanes, 7thWorld Congress of Chemical
Engineering, Incorporating the 5th European Congress of Chemical Engineering, Glasgow,
Scotland, July 10-14, 2005.
263-Zhongxiang Chen, and Said S.E.H. Elnashaie, Bifurcation Behavior During the Hydrogen
Production in Two Compatible Configurations of a Novel Circulating Fluidized Bed Membrane
Reformer, 7thWorld Congress of Chemical Engineering, Incorporating the 5th European
Congress of Chemical Engineering, Glasgow, Scotland, July 10-14, 2005.
264-Zhongxiang Chen, and Said S.E.H. Elnashaie, Optimization of Process Parameter and
Reformer Configuration for Hydrogen Production from Steam Reforming of Higher
Hydrocarbons, 7thWorld Congress of Chemical Engineering, Incorporating the 5th European
Congress of Chemical Engineering, Glasgow, Scotland, July 10-14, 2005.
265-Zhongxiang Chen, and Said S.E.H. Elnashaie, Economical Analysis of Hydrogen
Production by Auto-thermal Reforming of Hydrocarbons in a Novel Membrane Reformer,
Proceedings of the International Green Energy Conference, Waterloo, Ontario, Canada, 12-16
June 2005,
266-Zhongxiang Chen, and Said S.E.H. Elnashaie, Optimization of Process Parameter and
Reformer Configuration for Hydrogen Production from Steam Reforming of Heavy
Hydrocarbons, Proceedings of the International Green Energy Conference, Waterloo, Ontario,
Canada, 12-16 June 2005,
267- John R. Grace, Said Elnashaie and Jim Lim, Hydrogen Production in Fluidized Beds with
In-Situ Membranes, 10th International Chemical Reactor Engineering X. Innovations in
Chemical Reactor Engineering, Zacatecas, Mexico, August 2005
2006:
Journals:
268-Andres Mahecha-Botero,John Grace, Said S.E.H.Elnashaie and C Jim Lim, Comprehensive
Modeling of Gas Fluidized-Bed Reactors Allowing for Transients,Multiple Flow Regimes and
Selective Removal of Species,
International Journal
Of
Chemical Reactor
Engineering,Vol.4,Article A11,pp.1-21,2006
269-Andrés Mahecha-Botero, Parag Garhyan, S.S.E.H. Elnashaie, Non-linear characteristics of
a membrane fermentor for ethanol production and their implications”. Nonlinear Analysis: Real
World Applications, Vol.7, issue 3, pp.432-457, 2006(top 25 papers in the Journal, no.21)
270-Said S.E.H. Elnashaie, Zhongxiang Chen, Parag Garhyan, Pradeep Prasad, and Andres
Mahecha-Botero, Practical Implications of Bifurcation and Chaos in Chemical and Biological
Reaction Engineering, International Journal of Chemical Reactor Engineering, Volume 4,
Review R1, pp. 1-44, 2006
271- Kim Johnsen, John R. Grace, Said S.E.H. Elnashaie, Leiv Kolbeinsenc and Dag Eriksen,
Modelling of Sorption- Enhanced Steam Reforming in a Dual Fluidized Bubbling Bed Reactor,
Industrial Engineering Chemistry Research, 45 (12), 4133 -4144, 2006.
272- Parag Garhyan, Andres Mahecha-Botero and Said.S.E.H. Elnashaie, Complex
Bifurcation/Chaotic Behavior of Acetylcholinestrase and Choline-acetyltransferase Enzymes
System. Applied Mathematical Modelling, 30 (9), p.824-853, Sep 2006
40
Conferences:
273- Said S.E.H.Elnashaie, Andres Mahecha-Botero, John Grace, C.Jim Lim; Generalized
Dynamic Model for Fluidized-Bed Reactors and its Application to the Production of Pure
Hydrogen, 11th APCChE Conference, Kuala Lumpur, Malaysia, August 2006
2007:
Journals:
274- Said S.E.H.Elnashaie; Zhongxiang Chen and Pradeep Prasad; Efficient Production and
Economics of Clean-Fuel Hydrogen. International Journal of Green Energy, 4, 249-282, 2007
275- Said S.E.H.Elnashaie and John Grace; Complexity, Bifurcation and Chaos in natural and
Man-Made Lumped and Distributed Systems; Chemical Engineering Science, 62, 3295-3325,
2007
276- M. E. E. Abashar, S. S. E. H. Elnashaie; Feeding of oxygen along the height of a circulating
fast fluidized bed membrane reactor for efficient production of hydrogen, Trans IChemE, Part A,
Chemical Engineering Research and Design, 2007, 85(11): 1529- 1538
277- Mohamed E. E. Abashar, Fahad M. Alhabdan, Said S. E. H. Elnashaie, Staging Distribution
of Oxygen in Circulating Fast Fluidized-Bed Membrane Reactors for the Production of
Hydrogen, Ind. Eng. Chem. Res. 2007, 46, 5493-5502
278- John Grace, Heping Cui and Said S.E.H.Elnashaie; Non-Uniform Distribution of TwoPhase Flows Through Parallel Identical Paths, The Canadian Journal of Chemical Engineering,
85, 1-7, October 2007
279-Andres Mahecha-Botero, John R. Grace, Said S.E.H. Elnashaie, C. Jim Lim, A
Comprehensive Approach to Reaction Engineering, INTERNATIONAL JOURNAL OF
CHEMICAL REACTOR ENGINEERING, Volume 5, 2007, Article A17
Conferences:
280- R.C.Ciocci, I.Abou-Mahfouz and Said S.E.H.Elnashaie, Analysis to Develop Hydrogen
Production from Bio-oils; Proceedings of the 2007 ASME International Mechanical Engineering
Congress and Exposition, November 11-15, Seattle, Washington, USA, 2007
281- Said S.E.H.Elnashaie; Integrated System Approach to Sustainability; Bio-fuels and Biorefineries; CrossOver 2007, Bio-energy: From Fields to Wheels, Penn State University,
University park, September 4-5, 2007
282- Mahecha-Botero, A., Grace, J.R., Elnashaie, S.S.E.H., Lim, C.J., "Time scale analysis of a
fluidized-bed reactor based on a generalized dynamic model", Fluidization XII: “The 12th
International Conference on Fluidization. New Horizons in Fluidization Engineering”, Harrison
Hot Springs, BC, Canada, 2007
283- Feraih Alenazey, Cyrus G. Cooper, Said S.E.H. Elnashaie, Adesoji A. Adesina, Alfred A.
Susu, Solid-state kinetics of carbon removal from deactivated Co-Ni steam reforming catalysts:
Effect of gasifying agent. [Conference Article] 57th Canadian Chemical Engineering
Conference, Edmonton, Canada, 2007
2008
Journals:
284- Nabeel S. Abo-Ghander, John R. Grace , Said S.E.H. Elnashaie and C. Jim Lim, Modeling of
a novel membrane reactor to integrate dehydrogenation of ethyl benzene to styrene with
hydrogenation of nitrobenzene to aniline, Chemical Engineering Science, 63, 1817– 1826, 2008
285-Zhongxiang Chen, Friedrick Po, John R. Grace, C. Jim Lim, Said Elnashaie, Andrés
Mahecha-Botero, Mohammad Rakib,Yoshinori Shirasaki, IsamuYasuda, Sorbent-
41
enhanced/membrane-assisted steam methane reforming, Chemical Engineering Science, Vol.63,
pp.170 – 182, 2008
286- Said Elnashaie, The big picture, the chemical engineer (tce), UK, May, pp.26-28, 2008
287- Said S.E.H.Elnashaie, Seif-Edeen Fateen, Ahmed El-Ahwany and Tarek M.Mostafa,
Integrated System Approach to Sustainability. Bio-Fuels and Bio-Refineries, Bulletin of Science,
Technology & Society, Vol.28, No.6, December 2008, pp.510-520
288- M.E.E.Abashar, F.M.Alhabdan and Said S.E.H.Elnashaie; Discrete Injection of Oxygen
Enhances Hydrogen Production in Circulating Fluidized Bed Membrane Reactors, International
Journal of Hydrogen Energy, 33 (2008) 2477 – 2488
289- Alenazey, F., Dave, C. B., Elnashaie, S. S. E. H., Susu, A. A., and Adesina, A. A.
Coke removal from deactivated Co-Ni steam reforming catalyst using different gasifying
agents: An analysis of the gas-solid reaction kinetics, Catalysis Communications, 65, (2008),
5454-5462,
Conferences:
290- Feraih Alenazey, Chirag Dave, Said S.E.H.Elnashaie, Alfred A. Susu, Adesoji A. Adesina,
The influence of regeneration temperature on N2 gasification of coke-deactivated Co-Ni steam
reforming catalyst. [Conference Article] 14th ICC, Seoul, Korea, 2008
291- Alenazey, F.S., Cooper, C., Elnashaie, SS., Susu, AA. & Adesina, AA., 2008, 'Forced
Periodic Operation of Propane Steam Reforming with CO2 as Carbon Gasifying Agent, in
CHEMECA 2008, eds , Newcastle Australia, Australia, pp. 331 – 338
292- Feraih Alenazey, Chirag Dave, Cyrus Cooper, Said S.E.H. Elnashaie, Alfred A. Susu and
Adesoji A. Adesina , Forced Composition Cycling of Propane Steam Reforming Using CO2 as
Carbon Gasifying Agent, 18th Saudi Arabia-Japan Joint Symposium Dhahran, Saudi Arabia,
November 16-17, 2008
2009
Journals:
293-I.H.Mustafa,G.Ibrahim,A.Elkamel,S.S.E.H.Elnashaie,P.Chen,Non-linear feedback modeling
and bifurcation of the acetylcholine neurocycle and its relation to Alzheimer's and Parkinson's
diseases, Chemical Engineering Science Vol.64, pp.69-90, 2009
294- Andres Maheca- Botero; John, Grace, Elnashaie, S.S.E.H. and Jim Lim, C., Advances in
Modeling of Fluidized-Bed Catalytic Reactors: A Comprehensive Review, Chem. Eng. Comm.,
Vol.196, pp. 1375–1405, 2009
295-Andrés Mahecha-Boteroa, Zhongxiang Chen, John R. Grace, S.S.E.H. Elnashaie, C. Jim
Lim, Mohammad Rakib, Isamu Yasuda, Yoshinori Shirasaki, Comparison of fluidized bed flow
regimes for steam methane reforming in membrane reactors: A simulation study, Chemical
Engineering Science, Vol.64, 3598 – 3613, 2009
296- Andrés Mahecha-Botero , John R. Grace , C. Jim Lim , S.S.E.H. Elnashaie ,Tony Boyd and
Ali Gulamhusein, Pure Hydrogen Generation in a Fluidized Bed Membrane Reactor:
Application of the Generalized. Comprehensive Reactor Model (submitted to CES, 2008)
297- Feraih S. Alenazey, Chirag Dave, Said S.E.H. Elnashaie, Alfred Susu, Adesoji A.
Adesina, Simultaneous Coke Reduction with Improved Syngas Production during Propane
Steam Reforming using Forced CO2 Cycling, Chemical Product and Process Modeling, Vol. 4
(2009) / Issue 5 / Special Issue - WCCE8 2009
2010
Journals:
42
298- M.E.E. Abashar and S.S.E.H. Elnashaie , Dynamic and chaotic behavior of periodically
forced fermentors for bioethanol production, Chemical Engineering Science, 65, 4894–4905,
2010
299- Mohammad A. Rakib , John R. Grace , C. Jim Lim , Said S.E.H. Elnashaie , Bahman Ghiasi
, Steam reforming of propane in a fluidized bed membrane reactor for hydrogen production,
International Journal of Hydrogen Energy ( IJHE), in press, 2010
300- I. H Mustafa, A. Elkamel, S.S.E.H. Elnashaie, P. Chen, G. Ibrahim, Effect of
Cholineacetyltransferase and Choline Recycle Ratio on Bifurcation, Modeling and Chaotic
Behavior of Acetylcholine Neurocycle and Their Relation to Alzheimer’s and Parkinson’s
Diseases, Chemical Engineering Science, in press, 2010
301- Mohammad A. Rakib, John R. Grace, C. Jim Lim, and Said S.E.H. Elnashaie, Modeling of
a Fluidized Bed Membrane Reactor for Hydrogen Production by Steam Reforming of
Hydrocarbons, Ind. Eng. Chem. Research (IECR), in press, 2010
302- Mohammad A. Rakib, John R. Grace, C. Jim Lim, Said S.E.H. Elnashaie, Mark Epp, Ali
Gulamhusein, Tony Boyd, Alan Keelan, Pilot scale experimental setup for hydrogen production
from higher hydrocarbons: Safety considerations and implementation, IJHE, in press, 2010
PRESENTATIONS IN CONFERENCES WITHOUT REFEREED
PROCEEDINGS
1 - El-Rifai, M., Elnashaie, S.S.E.H. and Gaber A., “Optimal Reactivation of Fluidized Bed
Adsorbers”, Presented at the National Conference on Automatic Control, Cairo, Egypt, July 1975
2- El-Rifai, M. and Elnashaie, S.S.E.H., “Heterogeneous Dynamics and Minimum Reactivation
Time Control of Distributed Adsorptive Beds”, 4th International Congress in Scandinavia on
Chemical Engineering, 18-20 April, 1977
4- Elnashaie, S.S.E.H., “Multiplicity, Hysteresis and Instability in Chemically Reactive Systems”,
2nd Congress of International Technology, Pittsburgh, 1977
5-El-Rifai, M., Elnashaie, S.S.E.H., Abou-El-Fath, H. and M. El-Ansary, “Multiplicity and
Hysteresis in Active Biological Membranes Immobilized Mono - Enzyme Distributed Through the
Membrane”, 6th International Congress of Chemical Engineering, Chemical Equipment Design and
Automation, Praha, Czechoslovakia, August, 1978
6-Elnashaie, S.S.E.H. and Alhabdan, “Digital Simulation of Industrial Shift Converter for the
Production of Hydrogen. IV- Software Package for a One-Dimensional Heterogeneous Model”,
Fourth Mediterranean Congress on Chem. Eng. Barcelona, Spain, Nov. 1987
7- Elnashaie, S.S.E.H. and A.S. Al-Ubaid, “Modeling of the Exothermic Partial Oxidation of oxylene to Phthalic Anhydride”, Forth Mediterranean Congress on Chem. Eng. Bracelona, Spain,
Nov. 1987
8- Elnashaie, S.S.E.H. Ibrahim, G., “A distributed parameter Diffusion-Reaction Model for the
Alcoholic Fermentation Process”, presented at the AIChE Annual Meeting, November 27 –
December 2, 1988
9- Elnashaie, S.S.E.H. and Ibrahim, G., “The use of Mathematical Models for the Efficient
Production of Fuel Alcohol by Fermentation”, Cairo International Conference on Renewable Energy
Resources, Cairo, 13-16 June, 1988
10- Elnashaie, S.S.E.H., Fakeeha, A., Helal, E. and Abasher, M.A., “Compartmental Model for the
Alcoholic Fermentation Process in Immobilized Packed Bed Fermentor”, Presented at the 40th
Canadian Chem. Engng. Conference, Halifax, Canada, paper 192, July 1990
11- Elnashaie, S.S.E.H. and Elshishini, S.S., “Industrial Fluid Catalytic Cracking. A Mathematical
Modeling Approach”, Presented at the 40th Canadian Chem. Engng. Conference, Halifax, Canada,
paper 1207, July 1990
43
12- Elnashaie, S.S.E.H., Wagialla, K.M. and Helal, A., “Applicability of Fluidized Bed Technology
to Highly Exothermic Reactions”, Presented at the 40th Canadian Chem. Engng. Conference,
Halifax, Canada, paper 1175, July 1990
13- Elnashaie, S.S.E.H., and Abdalla, B.K., “A heterogeneous model for the Industrial Reactor for
the Catalytic Dehydrogenation of Ethylbenzene to Styrene”. Presented at the 41st Annual Canadian
Chemical Engineering Conference, Vancouver, Canada, October 1991
14- Elnashaie, S.S.E.H. and Al-Muhana, S., “A Heterogeneous Model for the Precise Simulation of
Fixed bed Catalytic Reactors for the Partial Oxidation of o-xylene to Phthalic Anhydride Using
Realistic Complex Reaction Network”. Presented at the 41st Annual Canadian Chemical
Engineering conference, Vancouver, Canada, October 1991
15- Al-Ubaid, A.S. and Elnashaie, S.S.E.H., “Langmuir-Hinshelwood Investigation of the Effective
Order of Catalytic Steam Reforming on different Supports”, Symposium on the Production and
Processing of Natural Gas, Chem. Eneng. Dept King Saud Univ., March 1992
16- Al-Farris, T.A., Abdelaleem, F.A. and Elnashaie, S.S.E.H., “Natural Gas Utilization in fertilizer
Industries in Kingdom of Saudi Arabia”. Symposium on the Production and Processing of Natural
Gas, Chem. Engng. Dept., King Saud Univ., March 1992
17- Wagialla, K.M., Elnashaie, S.S.E.H. and Helal, A.M., “Preliminary Investigation of Stability and
Optimum Operation of Fluidized Bed Catalytic Reactors for the Production of some natural gas
Derivatives”, Chem. Engng. Dept., King Saud Univ., March 1992
18- Elnashaie. S.S.E.H. and Abdalla, B.K., “Modeling of Catalytic Fluidized Bed Reactor for the
Steam Reforming of Methane”. Symposium on the Production and Processing of Natural Gas,
Chem. Engng. Dept., King Saud Univ., March 1992
19- Abashar, M.E. and Elnashaie, S.S.E.H., “Parametric Investigation of Industrial Methanators
using the Dusty Gas Model”. Symposium on the production and Processing of Natural Gas, Chem.
Engng. Dept., King Saud Univ., March 1992
20- Hamoda, W., Elnashaie, S.S.E.H., Al-Fariss, T.F. and Abdul Aleem, F.A., “Calcination of Saudi
Phosphate Rocks in a Pilot Plant Fluidized Bed Calcinator”, ACHEMA 94 International Meeting on
Chemical Engineering and Biotechnology, Frankfurt, Germany, Jan. 1994
21- Elnashaie, S.S.E.H., Abdalla, B.K., Al-Khowaiter, S.H. and Elshishini, S.S., “Maximization of
Styrene Yield from the Catalytic Dehydrogenation of Ethylbenzene in Fixed and Fluidized Bed
Configurations with and without Selective Membranes”, ACHEMA 94 International Meeting on
Chemical Engineering and Biotechnology, Frankfurt, Germany, Jan. 1994
22- Elnashaie, S.S.E.H. and Abashar, M.E. “Periodic and Dynamic Behavior of Unforced and
Forced Fluidized Bed Catalytic Reactors”, ACHEMA 94 International Meeting on Chemical
Engineering and Biotechnology, Frankfurt, Germany, Jan 1994
23- Elshishini, S.S. and Elnashaie, S.S.E.H., “Bifurcation and Dynamic Behavior of Industrial Fluid
Catalytic Cracking (FCC) Units”, ACHEMA 94 International Meeting on Chemical Engineering and
Biotechnology, Frankfurt, Germany, Jan 1994
24- Elnashaie, S.S.E.H., Al-Fariss, T.F., Abdulaleem, F.A. and Gassem, N., “Acidulation of Saudi
Phosphate Rocks in a Micro Pilot Continuos Unit. II. Mathematical Modeling of the Process”,
ACHEMA 94 International Meeting on Chemical Engineering and Biotechnology, Frankfurt,
Germany, Jan 1994
25- Elshishini, S.S., Elnashaie, S.S.E.H., and Abasaeed, A.E., “Bifurcation and Dynamic Behavior
of Industrial Fluid Catalytic Cracking (FCC) units”, Proceedings of the 2nd International Conference
on Unsteady State Processes in Catalysis, St. Louis, USA, 10-13 Sept. 1995
26- Elnashaie, S.S.E.H. and Abashar, M.E., Bifurcation and Chaos in Fluidized Bed Catalytic
Reactors with Consecutive Exothermic Reactions”, Proceedings of the 2nd International Conference
on Unsteady State Processes in Catalysis, St. Louis, USA, 10-13 Sept. 1995
27- Elnashaie, S.S.E.H. Alhadad, S. Ibrahim, G. and Elshishini, S.S., “Bifurcation and Chaos in an
Experimental Fermanter with zymomonas Mobilis at High Ethanol Concentration”, Proceedings of
44
the 2nd International Conference on Unsteady State Processes in Catalysis, St. Louis, USA, 10-13
Sept. 1995
28- Noureldin, M.B. and Elnashaie, S.S.H " Static/Dynamic Bifurcation Behavior of Hydrocarbon
Reaction engineering", AIChE Spring meeting, Atlanta, March 6, 2000.
283-Elnashaie, S.S.E.H, Abdallah, B..K., Alkhowiter, S. and Noureldin,M.B.," On the Link between
Intrinsic Catalytic Reactions Kinetics and the development of Catalytic Processes", the 16th
Canadian Symposium on Catalysis,Alberta,Canada,May 23-26, 2000
29- Noureldin, M.B and Elnashaie, S.S.H "Environmentally- Benign CatalyticReactor-Regenerator
system for the Dry Reforming of Natural gas", the 16th Canadian Symposium on Catalysis,
Alberta,Canada,May 23-26, 2000
30- Noureldin, M.B. and Elnashaie, S.S.H "In- Process Modification to achieve Minimum Pollution
Maximum Production for PVC and Coke Plants" AIChE annual meeting, LA, November 12-17,
2000
31- Noureldin,M.B. and elnashaie, S.S.E.H., "Novel Integrated Catalytic Dehydrogenation/
Hydrogenation Membrane Fixed Bed Reactor", AIChE annual meeting,LA, November 12-17, 2000
32- Noureldin,M.B., and Elnashaie, S.S.E.H., "Integrated Multidisciplinary Approach for the
Efficient Production of Fuel Ethanol from Cellulosic Materials", AIChE annual meeting,LA,
November 12-17, 2000
33- Noureldin.M.B. and Elnashaie. S.S.H. "Efficient Integrated Novel reformer Configuration for
Maximum Hydrogen Production with Minimum Pollution" AIChE annual meeting, LA, November
12-17, 2000
34- Noureldin, M.B. and Elnashaie, S.S.H. " A Novel configuration for the Efficient Dry Reforming
of Natural Gas: The Optimum Utilization of Carbon Dioxide", AICHE, annual meeting, LA,
November 12-17, 2000
35- Noureldin, M.B. and Elnashaie, S.S.H. "In-Process Modifications for Maximum Production
Minimum Pollution Minimum Fresh Resources. A Systematic Approach", AIChE annual meeting,
Reno, Novemeber 4-9, 2001
36- S.S.E.H.Elnashaie, P.Prasad, C.Roberts, M.A.Rakib and S.S.Elshishini, “Critical Design Factors
for Membrane Circulating Fluidized Bed Reformer for the Efficient Production of Pure Hydrogen”,
Presented at the AIChE Annual Conference 2000, Los Angeles, November 2000
37- S.S.E.H. Elnashaie, P. Garhyan, S.A. Haddad, G. Ibrahim, A. Abasaeed, R.P. Chambers, Y.Y.
Lee and D. Bransby, “ Multidisciplinary Approach for the Efficient Production of Fuel Ethanol from
Cellulosic Materials”, AIChE Annual Conference 2000, Los Angeles, CA, November 2000
38- Noureldin, M.B. and Elnashaie, S.S.E.H., "In- Process Modifications for Minimum Pollution
Maximum Production. A Multilevel Programming Approach", AIChE Spring meeting, Houston,
April 24-26, 2001
39-Pradeep Prasad and S. S. E. H. Elnashaie, “Membrane Circulating Fluidized Bed Reformer for
the Efficient Production of Hydrogen from Hydrocarbons”, Presented at the AICHE Annual
Conference 2001, Reno, November 2001
40- Parag Garhyan and S.S.E.H. Elnashaie , “Exploitation of Static/Dynamic Bifurcation and
Chaotic Behavior of Fermentor for Higher Productivity of Fuel Ethanol”, AIChE Annual Conference
2001, Reno, NV, November 2001
41- Parag Garhyan and S.S.E.H. Elnashaie, “Multidisciplinary Research to Develop Novel
Technologies for the Efficient Production of Fuel Ethanol from Ligno-cellulosic Waste”,
International Conference on Fiber Industry and Environmental Biocomplexity, Auburn, AL, January
2002
42- Elnashaie,S.S.E.H. and Elshishini,S.S., “ An Integrated System Approach to: Biocomplexity,
Pollution Prevention (P2), Ultra Clean Fuels, Cleaner Technologies and Life Cycle
Analysis(LCA),2002 International Conference on the Fiber Industry and Environmental
Biocomplexity, Auburn University, January 27-29,2002
45
43- Elnashaie,S.S.E.H. and Elshishini,S.S., “ An Integrated System Approach to: Biocomplexity,
Pollution Prevention (P2), Ultra Clean Fuels, Cleaner Technologies and Life Cycle Analysis(LCA)”,
2002 International Conference on the Fiber Industry and Environmental Biocomplexity, Auburn
University, January 27-29,2002
44- Elnashaie,S.S.E.H. and Elshishini,S.S., “An Integrated System Approach to Explore the Effect
of Fibrous ( Natural and Synthetic) Industries on Biocomplexity”, 2002 International Conference on
the Fiber Industry and Environmental Biocomplexity, Auburn University, January 27-29,2002
45- Pradeep Prasad, Zhongxiang Chen, and Said S.E.H. Elnashaie, Carbon Dioxide Sequestration
to Improve the Performance of a Novel Circulating Fluidized Bed Membrane Steam Reformer,
AIChE 2002 Annual Meeting, Indianapolis, Indiana, November 3-8, 2002
46- P. Garhyan, Said S.E.H. Elnashaie and A. Mahecha-Botero,Bifurcation and Chaotic Behavior
of Acetylcholinestrase enzyme and its Possible Link to Alzheimer and Parkinson Diseases, 52nd
Canadian Chemical Engineering Conference, at Vancouver, BC, Canada, October 2002
47- P. Garhyan, Said S.E.H. Elnashaie and A. Mahecha-Botero, Exploitation of Bifurcation and
Chaotic Behavior of Ethanol Fermentors, 52nd Canadian Chemical Engineering Conference, at
Vancouver, BC, Canada, October 2002
48- Parag Garhyan and Said S.E.H. Elnashaie, Modeling and Investigation of Complex Behavior of
an Ethanol Fermentor, AIChE Annual Conference, at Indianapolis, USA, November 2002
49- Parag Garhyan, Said S.E.H. Elnashaie and A. Mahecha-Botero Modeling/Computational,
Investigation of the Bifurcation/Chaotic Behavior of ACh Neurocycle and its Link to
Alzheimer/Parkinson Diseases, AIChE Annual Conference, at Indianapolis, USA, November 2002
50- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Novel Circulating Fluidized Bed
Membrane Reformer-Regenerator System for the Production of Hydrogen for Fuel Cells from
Heptane, Proceeding of the AIChE 2003 Annual Meeting, San Francisco, USA, 2003
51- Zhongxiang Chen, Yibin Yan, and Said S.E.H. Elnashaie, Hydrogen Production in a Novel
CFB Membrane Reformer and Catalyst Deactivation and Engineering Control, Proceeding of the
AIChE 2003 Annual Meeting, San Francisco, USA, 2003
52- Parag Garhyan, Said S.E.H. Elnashaie and Pradeep Prasad Computational Investigation of
Bifurcation/Chaotic Behavior of Acetylcholine Neurocycle. 53rd Canadian Chemical Engineering
Conference, at Ontario, Canada, October 2003
53- Parag Garhyan, Said S.E.H. Elnashaie and Pradeep Prasad, Practical Relevance of Bifurcation
and Chaos to the Design and Operation of Ethanol Fermentors. 53rd Canadian Chemical Engineering
Conference, at Ontario, Canada, October 2003
54- Parag Garhyan, Said S.E.H. Elnashaie and Pradeep Prasad, Maximization of Ethanol
Production Using Bifurcation Analysis.AIChE Annual Meeting, , San Francisco, USA, November
2003
55- Pradeep Prasad, Parag Garhyan and Said Elnashaie, Innovative Circulating Fluidized Bed
Design for Hydrogen Production, AIChE Annual Meeting, San Francisco, CA, 2003
56- Pradeep Prasad, Parag Garhyan and Said Elnashaie, Novel Circulating Fluidized Bed Reformer
Design for Efficient Production of Hydrogen Using Techniques for Breaking the Equilibrium
Barrier, AIChE Annual Meeting, San Francisco, CA, 2003
57- Parag Garhyan, Pradeep Prasad and Said Elnashaie, Maximization of Ethanol Production using
Bifurcation Analysis, AIChE Annual Meeting, San Francisco, CA, 2003
58-Zhongxiang Chen and Said S.E.H. Elnashaie, Novel Autothermal CFB Membrane Reformer for
Efficient Pure Hydrogen Production for Fuel Cell from Heptane, GSC Research Forum, Auburn
Univeristy, 2004.
59- Parag Garhyan and S.S.E.H. Elnashaie, Experimental Verification of Static and Dynamic
Bifurcation of a Continuous Ethanol Fermentor, AICHE Annual Meeting 2004, Austin, Texas, USA,
November 2004
46
60- Parag Garhyan and S.S.E.H. Elnashaie, Bifurcation/Chaotic Behavior of Acetylcholine
Neurocycle and Possible Cause of Choligernic Degenerative Diseases, AICHE Annual Meeting
2004, November 2004, Austin, USA, November 2004
61- Parag Garhyan, P. Prasad, G. Ibrahim, H. A. Halim and S.S.E.H. Elnashaie, Modeling of
Suspended/Attached (Hybrid Growth) Domestic Wastewater Treatment Unit, AIChE Annual
Meeting 2004, Austin, Texas, USA, November 2004
62-Pradeep Prasad and Said Elnashaie, Innovative Circulating Fluidized Bed Design for Hydrogen
Production: Static Bifurcation Characteristics, AIChE Annual Meeting, Austin, TX, November 7-12,
2004
63-Pradeep Prasad and Said Elnashaie, Hydrogen Production in a Circulating Fluidized Bed
Reformer: Effect of Different Techniques for Breaking Thermodynamic Equilibrium, AIChE Annual
Meeting, Austin, TX, November 7-12, 2004
64-Feraih Alenazey, Cyrus G. Cooper, Said S.E.H. Elnashaie, Adesoji A. Adesina, Alfred A. Susu,
Solid-state kinetics of carbon removal from deactivated Co-Ni steam reforming catalysts: Effect of
gasifying agent. [Conference Article] 57th Canadian Chemical Engineering Conference, Edmonton,
Canada, 2007
65-Feraih Alenazey, Chirag Dave, Said S.E.H.Elnashaie, Alfred A. Susu, Adesoji A. Adesina, The
influence of regeneration temperature on N2 gasification of coke-deactivated Co-Ni steam reforming
catalyst. [Conference Article] 14th ICC, Seoul, Korea, 2008, 2008
PARTICIPATION IN CONFERENCES:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
2nd International Symposium on Chemical Reaction Engineering, Amsterdam,
Netherlands, 1972.
International Congress on Fluidization and its Applications, Toulouse, France, 1973.
Colloqué International, Analyse et Régulation des Syetèmes a Enzymes Immobolisés,
Compiègne, France, 1975.
The 2nd Annual Operation Research Conference, Cairo, 1975.
National Conference on Automatic Control, Cairo, 1975.
Symposium on Biochemical Engineering Education in Egyptian. (AIBS), Cairo
University, Egypt, 1975.
4th International Congress in Scandianavia on Chemical Reaction Engineering,
Copenhagen, 1977.
2nd Congress of International Technology, Pittsburgh, U.S.A., 1977.
4th Annual Operations Research Conference, Cairo, 1978.
6th International Congress of Chemical Engineering, Chemical Equipment Design and
Automation, Praha, Czechoslovakia, 1978.
IFAC Conference on System Approach for Development, American University, Cairo,
1978.
Enzyme Engineering V Conference, Hennikar, U.S.A., August, 1979.
IFAC Conference on System Approach for Development, Rabat, Morocco, 24-27
November, 1980.
2nd Chemical Congress of the North American Continent, San Francisco, 24-29 August,
1980.
NATO Advanced Study Institute. Multiphase Chemical Reactors, Vimeiro, Porto,
Potugal, April 1981.
CHEMPOR’ 81, 3rd International Chemical Engineering Conference, Porto, Potugal,
April 1981.
International AMSE Conference on Modeling and Simulation, Vallee de Chevreuse,
Paris-Sud, France, 1-3 July 1982.
47
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
9th Annual operations Research Conference, Zagazig University, 8-9 February 1983.
International AMSE Conference on Modeling and Simulation, Nice, France, 12-14
September 1983.
International AMSE Conference on Modeling and Simulation, Cairo, Egypt, 1987.
International IASTED Conference on Modeling and Simulation, Cairo, Egypt, 1987,
(Chairman of the session for Chemical Engineering Modeling and Simulation).
Second National Conference of Saudi Chemists, King Saudi University, Feb. 1987.
4th Mediterranean Conference on Chem. Eng., Bracelona, Spain, Nov. 1987.
18th Annual Conference on Modeling and Simulation, Univ. of Pittsburgh, April 1987.
Methane Conversion Symposium, Auckland, New Zealand, April 1987.
Third Egyptian Chem. Eng. Conference, Egyptian Society of Chemical Engineers, Cairo,
March 1988.
ACHEMA 88 – Frankfurt – West Germany – May 1988.
CHEMDATA 88 – Goteborg – Sweden – May 1988.
10th International Symposium on Chemical Reaction Engng. – ISCRE10, Basel –
Switzerland, August – September 1988.
Annual Meeting of the American Institute of Chemical Engineers, Washington, D.C., 27
Nov. – 2 Dec. 1988.
Computer Applications in Chemical Industry Conference, Erlangen, West Germany,
April 1989.
Engineering Foundation VI Fluidization Conference, Banff – Canada, May 1989.
Annual Meeting of the American Institute of Chemical Engineers, San Francisco,
November 1989.
11th International Symposium on Chemical Reaction Engineering, ISCRE 11, Toronto –
Ontario – Canada, 8-11 July, 1990.
40th Canadian Chemical Engineering Conference – Halifax – Nova Scottia, 15-21 July
1990.
Annual Meeting of the American Institute of Chemical Engineers, Chicago, 1990.
Third Saudi Engineering Conference – College of Engng. – King Saud University –
Riyadh – Dec. 1991.
Symposium on the Production and Processing of Natural Gas – Chemical and Petroleum
Engng. Depts – King Saud University – March, 1992.
Symposium on Corrosion and its Protection – Chem. Engng. Dept. – King Saud Univ. –
May, 1992.
International Conference on Chemistry in Industry, Bahrain, 14-16 Nov. 1992.
2nd International Conference on Catalysis in Petroleum and Petrochemical Industries, 2226 April 1995, Kuwait.
International Conference on Advances in strategic Technologies, 12-15 June 1995,
Bangi, Selangor, Malaysia.
2nd International Conference on Unsteady State Processes in Catalysis, 10-13 September
1995, St. Louis, USA.
1st Egyptian-Syrian Chemical Engineering Conference, 2-5 October 1995, Suez, Egypt.
4th Saudi Engineering Conference, 5-8 November 1995, Jeddah, Saudi Arabia.
Chemical Reaction Engineering Forum (CREF’96), Bijing, China, June, 1996.
15th World Petroleum Congress (WPC), Bijing, China, October 1997.
AICHE spring meeting, Atlanta, March 6, 2000.
AIChE Spring meeting, Atlanta, March 6, 2000.
16th Canadian Symposium on Catalysis,Alberta,Canada,May 2326, 2000.
48
51.
52.
53.
AIChE Annual Meeting,LA, November 12-17, 2000
AIChE Spring meeting, Houston, April 24-26, 2001.
Pollution Prevention& Cleaner Production Workshop, March 1719, 2001, Hilton Dreams-Sharm El-Sheikh, Egypt
54.
AIChE Annual Conference 2001, Reno, NV, November 2001.
55.
International Conference on the Fiber Industry and Environmental
Biocomplexity. Auburn University, Auburn, Alabama, USA, January 27-29, 2002
56.
223rd ACS National Meeting, Orlando, April 2002.
57.
16th Symposium of Malaysian Chemical Engineers, October 2002 at Kuala Lumpur,
Malaysia.
58. International Conference for the Use and Control of Chaos,
Southampton, UK.
59. AIChE annual Conference, San Francisco, California, USA,2003
60. AIChE annual Conference, Austin, Texas, USA, 2004
61. First International Green Energy Conference, Waterloo, Ontario, Canada, June,2005
62. 10th International Chemical Reactor Engineering X. Innovations in Chemical Reactor
Engineering, Zacatecas, Mexico, August 2005
63. 11th APCChE Conference, Kuala Lumpur, Malaysia, August 2006
64. 2007 ASME International Mechanical Engineering Congress and Exposition, November 1115, Seattle, Washington, USA, 2007
65. Cross-Over 2007, Bio-energy: From Fields to Wheels, Penn State University, University
park, September 4-5, 2007
66. Jeddah Conference
67. CONGRESO NACIONAL PREPARATORIO BAHÍA BLANCA CIQyDS 2010
“La ingeniería Química y su aporte al desarrollo sostenible”, 16 Y 17 DE ABRIL DE 2010,
Bahia Blanca, Argentina, April, 2010
68. Egyptian Petroleum Research Institute (EPRI), Cairo, Egypt, ( Title of lecture: Sustainable
Development, Global Warming, Bio-Fuels and Integrated Bio-Refineries), February , 2010
49