RONAN FULL, QUEEN OR KING BED
HARDWARE
8 - threaded
connectors
8 - side
rail hex
nuts
Missing hardware?
Please call 800.606.6387 for replacements.
6 - slat
bolts
6 - slat hex
nuts
16 - wood
dowels
2 - small
support leg
bolts
8 - brackets
6 - washers
3 - large
support leg
bolts
TOOLS REQUIRED
Thank you for purchasing the Ronan Full, Queen or King
Bed. This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
phillips head screwdriver
(not included)
allen wrench (included)
hex wrench (included)
(We recommend the use of hand tools instead of power tools)
COMPONENTS
1 - headboard
1 - slat
assembly
Made in Indonesia - r06
2 - side rails
1 - footboard
(1 left, 1 right)
1 - center
support rail
3 - support
legs
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 1 of 3
RONAN FULL, QUEEN OR KING BED
NOTE: Do not over
tighten the bolts
NOTE: Do not fully
tighten threaded
connectors. Make sure
to leave 1 1/4 - 1 3/8”
of connector extended.
center
support rail
A headboard
support
leg
B footboard
1 A) Insert 8 wood dowels and 4 threaded connectors
into headboard as shown. Turn connector clockwise 3-5
times to secure, leaving 1 1/4- 1 3/8” extended.
B) Insert 8 wood dowels and 4 threaded connectors into
footboard as shown. Turn connector clockwise 3-5 times
to secure, leaving 1 1/4 - 1 3/8” extended.
2 Fit pre-installed dowels of 3 support legs into
corresponding holes of center support rail as shown.
Secure each leg with 1 large support leg bolt, using an
allen wrench. Do not over tighten the bolts.
3 A) With the assistance of another adult, fit dowels of headboard
into corresponding holes of left and right side rails. Secure left and
right side rails to headboard with 2 brackets and 2 side rail hex
nuts per side as shown, using a hex wrench. Do not over tighten.
B) Repeat step 3A for footboard.
NOTE: Make sure
each bracket is
assembled as shown
A
left side
rail
side rail
hex nut
headboard
bracket
right side
rail
B footboard
Made in Indonesia - r06
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 2 of 3
RONAN FULL, QUEEN OR KING BED
4 With the assistance of another adult, attach slat
assembly to center support rail assembly with 2
small support rail bolts, using an allen wrench.
Do not over tighten the bolts.
NOTE: Make sure straps of
slat assembly face down
slat assembly
center support
rail assembly
5 With assistance of another adult, carefully align slat assembly with
pre-installed rail on each side rail. Secure slat assembly to each side
rail with 3 slat bolts, 3 washers and 3 slat hex nuts using a phillips
head screwdriver. Do not over tighten the bolts.
Assembly is now complete.
NOTE: Do not over
tighten the bolts
slat bolt
washer
slat hex nut
CLEANING AND CARE
Made in Indonesia - r06
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3 of 3