Technical data sheet · LÜTZE SUPERFLEX® N (C) PVC
For medium to high requirements
PVC control cables · C-track
compatible · shielded
Subject to technical modification 101288
Identification
Use/Application/Properties
Application
Properties
Technical data
Rated voltageU0/U
Prüfspannung
Temperature range moving
Temperature range fixed
Minimum bending radius moving
Type
Part-No.
SU N(C)PVC (3G0,5)
101288
• Machine and device construction, transport and conveyor technology, HVAC technology
• In dry and damp rooms
• As a monitoring, measurement and control cable in continuously moving applications
• For installation in energy chains with constant linear movement
• Anywhere where electrical interference fields can influence the signal transmission
• Construction and material suitable for continuous movement application.
• High active and passive interference resistance
• PVC Flame-retardant, self-extinguishing
• Resistant to most oils, greases, acids and alkalis (see tech. information)
• Silicone free
• RoHS-compliant
300/500 V
AC 3000 V
-15 °C … +80 °C
-30 °C … +80 °C
12×D
18.06.2016 – Subject to technical modification
Part-No. 101288
USA: LUTZE INC.
13330 South Ridge Drive • Charlotte, NC 28273, USA
Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223
www.lutze.com • [email protected]
United Kingdom: LUTZE Ltd.
Unit 3, Sandy Hill Park
Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU
Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2
www.lutze.com • [email protected]
page 1 of 3
Technical data sheet · LÜTZE SUPERFLEX® N (C) PVC
For medium to high requirements
Minimum bending radius fixed
Bending cycles
Travel distance
Speed
Acceleration
Conformity
Burning behavior
6×D
≥1 Mio
≤15 m
5.0 m/s
10 m/s²
CE
RoHS
DIN EN 60332-2-2
VDE 0482 Part 265-2
DIN EN 50265-2
Element 1
Conductor construction
Insulation resistance at 20°C
(3G0,5)
20 MΩ×km
Construction
Description
Number of conductors/cross-section
Conductor insulation
Conductor insulation standard
Jacket material
Jacket color
Outer ∅
Weight
Cu-Index
SUPERFLEX N (C) PVC
(3G0.5)
Special PVC
VDE 0281-1
Special PVC
grey RAL 7001
6.8 mm
6.8 kg/100 m
2.8 kg/100 m
Element 1
Conductor construction
Conductor
Conductor category
Conductor marking
Conductor marking standard
Wrapping
(3G0,5)
CU-wire bare
IEC 60228, Class 6
black
with white number print
DIN EN 50334
Non-woven material
Gesamtaufbau
Overall stranding
Overall wrapping
Inner jacket
stranded layers
Non-woven material
PVC
18.06.2016 – Subject to technical modification
Part-No. 101288
USA: LUTZE INC.
13330 South Ridge Drive • Charlotte, NC 28273, USA
Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223
www.lutze.com • [email protected]
United Kingdom: LUTZE Ltd.
Unit 3, Sandy Hill Park
Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU
Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2
www.lutze.com • [email protected]
page 2 of 3
Technical data sheet · LÜTZE SUPERFLEX® N (C) PVC
For medium to high requirements
Overall shield
Jacket characteristics
General
Note
Braid shield
Tinned copper wires
optical cover approx. 85%
Flame-retardant
self-extinguishing
Silicone-free
Oil resistant
grease-resistant
acid-resistant.
alkali-resistant
CE These products are in conformity with the EU Low Voltage Directive 2014/35/EU
Logo
18.06.2016 – Subject to technical modification
Part-No. 101288
USA: LUTZE INC.
13330 South Ridge Drive • Charlotte, NC 28273, USA
Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223
www.lutze.com • [email protected]
United Kingdom: LUTZE Ltd.
Unit 3, Sandy Hill Park
Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU
Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2
www.lutze.com • [email protected]
page 3 of 3