The Complete Solution
For All Your Bolting Requirements
Rollstud aim to provide a fast, reliable, competitively priced range of quality
assured studbolts and fasteners, predominately for the Oil, Gas, Power Generation
and Petrochemical Industries but we also supply to many other industries.
Complete Piping Packages are also offered and Gaskets are available from stock,
enabling us to provide a "one stop" solution that can meet every need.
www.rollstud.com
R LLSTUD
Keeping it Together
QUALITY & TESTING
WE CONSIDER THE HIGHEST LEVEL OF
QUALITY CONTROL TO BE ESSENTIAL TO
OUR CONCEPT OF A QUALITY SERVICE
The highest standards of quality and service are
maintained by a Quality Management System
accredited to BS EN ISO 9001:2008, Certificate No.
67397-2009-AQ-GBR-UKAS by DNV-GL.
Full traceability of all our products is maintained by
the use of a unique 2-digit cast code. This relates
back to the original Mill Certificate and remains with
the material through all aspects of manufacture so
that original Rollstud manufacturer test certificates
can be automatically printed on successful final
inspection.
Our computer-controlled system ensures that fully
traceable test certificates arrive when the product is
delivered. All testing and certification adheres to
relevant industry standards, including independent
test authorities where required.
www.rollstud.com
RANGE OF PRODUCTS
IN HOUSE TEST LABORATORY
• Studbolts.
•
•
•
•
•
•
•
•
•
•
•
• Nuts – Drilled, Spherical & Half / Lock nuts.
• Engineering Studs.
• Washers – Round, Spring, Taper, Shakeproof,
Spherical & Square.
• Hex Head Bolt.
• Hex Head Setscrew.
• Socket Head Cap Screw.
• Anchor Bolts.
Tensile Testing
Charpy Impact Testing
Hardness Testing
Positive Material Identification (PMI)
MPI Testing
UT Testing
Coating Thickness Testing
Visual Inspection
Dimensional Examination
Personnel qualified to ASNT Level II
Inspection and measuring equipment is subject
to periodic calibration
Size Range Available:
• 1/2” - 4” Imperial Diameter of material stocked
on the shelf.
• M6-M90 Metric Diameter of material stocked on
the shelf.
• Rollstud currently have approximately £1million
of stock at each of the 3 branches.
Rollstud also offer testing at Independent Test
Laboratories for tests that cannot be done in
house and/or where the requirement calls for
Independent Third Party Witness.
These tests include but are not limited to:
• Tensile Testing
• Our current suppliers also hold material on the
shelf which we can call off at any time.
• Charpy Impact Testing
• Goods are supplied with a Test Certification to
EN10204 (E) 3.1 on this range of material.
• Positive Material Identification (PMI)
• Hardness Testing
• MPI Testing
• UT Testing
• Proof Load Testing
• Chemical Analysis
• Microstructure Analysis
• Elevated Tensile Testing
• Salt Spray Testing
• Coating Thickness Testing
MATERIALS
COATINGS
• ASTM A193 B7 / A194 2H.
• ASTM A320 L7 / A194 Gr4 or Gr7.
• ASTM A193 B16.
• ASTM A193 B7M / A194 2HM.
• ASTM A320 L7M / A194 Gr7M.
• ASTM A193 B8 / A194 Gr8.
• ASTM A193 B8M / A194 Gr8M.
• Hastelloy C276, C22, B2, B3 & X.
• Inconel Alloy 600, 625, 718, 800, 825 & 925.
• Titanium Grade 2 & 5.
• Monel Alloy 400 or K500.
• Super Duplex UNS S32750, UNS S32760 FLT,
• UNS S32760 SA.
• Zeron 100 SA & Zeron 100 FLT.
• Ferralium.
• Duplex, UNS S31803.
www.rollstud.com
The Complete Solution
24 HOUR CALLOUT SERVICE - Please contact us at ANY TIME
please see below for your nearest branch
ABERDEEN (HEAD OFFICE)
HARTLEPOOL
DUBAI
ABU DHABI
T +44 (0) 1224 425300
F +44 (0) 1224 425333
E [email protected]
T +44 (0) 1429 865656
F +44 (0) 1429 865657
E [email protected]
T +971 4 8830717
F +971 4 8830718
E [email protected]
T +971 2 6315018
F +971 2 6319940
E [email protected]