PRODUCT DATA SHEET
FT-S set
TEMPERATURE CONTROLLER
The accessory sets for the "thermofloor" floor tempering system include all
essential components required for the electrical installation and control of the
heating mats. The sets are available as standard or Comfort version. The standard
set FT-S set includes the electronic floor temperature controller RTF. The Comfort
set FT-C set includes the electronic floor temperature controller RTF-Z with digital
7-day timer. Apart from the controllers, the sets respectively include a 3 m conduit
for the floor temperature sensor with sensor sleeve, a 90° sensor pipe bend, a 2
m conduit for the supply cable, a 90° cable conduit bend and two plaster boxes for
an equipment diameter of 55 mm.
The main features
FT-C set with floor temperature controller RTF-Z
FT-C set with floor temperature controller RTF
With conduits for supply cable and floor sensor
With plaster boxes
May be used in all types of floor tempering systems
PRODUCT-NO.: 185604
PRODUCT DATA SHEET
Type
FT-C set
FT-S set
Part no.
185605
185604
PRODUCT DATA SHEET
Contact information
You have questions? We appreciate to help you:
Call +49 5531 - 7020
Write an email to [email protected]
Installation information
Please ask your local power supply utility or a registered electrician to install
appliances that are not fully wired, i.e. ready to plug in. The electrician should
also be able to assist you with obtaining the agreement of the respective power
supply utility required for the appliance installation.