INSTRUCTIONS FOR USING
Poly-TWILL
Player Names
™
for current application instructions visit us online
1.Remove backing from Player Name leaving Poly-TWILL™
letters pre-spaced and adhered to the pre-mask tape.
Heat Apply
Temperature: 330°F; 165°C
Time: 10 seconds
Pressure: Medium (#4 on Hotronix®)
®
To Order: 800.4.STAHLS • Fax: 800.346.2216
International: 586.772.5551 • Canada: 800.521.5255
StahlsID.com • StahlsCanada.com
2.Position Player Name onto garment.
®
(Based on Stahls’ Hotronix & Hot One heat
presses. Settings on other heat presses may vary.)
3.Heat apply
4.Remove pre-mask tape.
5.Poly-TWILL™ must be zig-zag stitched or satin stitched around
the edges.
Hotronix is a registered trademark of Stahls’ ID Direct with one or more patents or patents pending. © Stahls’ ID Direct 2008
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance for conditions not under manufacturer's control.
Before using, please determine the suitability of product for its intended use. The user assumes all risk and liability whatsoever in connection with the use of this product.
Seller's and man­ufacturer's only obligation shall be to replace such quantity of the product proved to be defective by manufacturer.
StahlsID.com
800.4.STAHLS
StahlsCanada.com
800.521.5255
INSTRUCTIONS FOR USING
Poly-TWILL
Player Names
™
Temperature: 330°F; 165°C
Time: 10 seconds
Pressure: Medium (#4 on Hotronix®)
®
To Order: 800.4.STAHLS • Fax: 800.346.2216
International: 586.772.5551 • Canada: 800.521.5255
StahlsID.com • StahlsCanada.com
Heat Apply
9995211 T-06 01/09
for current application instructions visit us online
1.Remove backing from Player Name leaving Poly-TWILL™
letters pre-spaced and adhered to the pre-mask tape.
2.Position Player Name onto garment.
®
(Based on Stahls’ Hotronix & Hot One heat
presses. Settings on other heat presses may vary.)
3.Heat apply
4.Remove pre-mask tape.
5.Poly-TWILL™ must be zig-zag stitched or satin stitched around
the edges.
Hotronix is a registered trademark of Stahls’ ID Direct with one or more patents or patents pending. © Stahls’ ID Direct 2008
All technical information and recommendations are based on tests we believe to be reliable. However, we cannot guarantee performance for conditions not under manufacturer's control.
Before using, please determine the suitability of product for its intended use. The user assumes all risk and liability whatsoever in connection with the use of this product.
Seller's and man­ufacturer's only obligation shall be to replace such quantity of the product proved to be defective by manufacturer.
StahlsID.com
800.4.STAHLS
StahlsCanada.com
800.521.5255
9995211 T-06 01/09