sINGLE round bales
Our trailing feeder range is by far one of the biggest offered by any manufacturer as we endeavour
to meet the demands of feeding out variable round bales. All of our trailing models are self loading
and designed to handle all types of straw, hay and baled silage. Our Bale Buggy is designed to
meet smaller feeds demands and can be ute or ATV driven with no hydraulics required.
SINGLE ROUND BALES
Easy to tow, our Bale Buggy feeds out from the rear of the machine to minimise bloackages and
retain feed quality.
Buggy tips back easily
to self-load the bale
Ability to adjust the
floor chain tension
Engage the drive
wheel by simply
dropping it down onto
the tyre
features:
Winch for loading
bales onto the feeder
Feeds out at the rear,
minimising blockages
and maintaining feed
quality
DIMENSIONS:
• Ute or ATV driven (no hydraulics required)
• Feeds out at the rear, minimising blockages
• Handles a variation of round bales including hay, straw and baleage
Bale Size (maximum)
Weight (unladen)
1.8m (dia) x 1.35m (6˝ x 4˝6)
310kg
Height
1520mm
• Self-loading
Length
3400mm
• 8mm high-tensile link feed chains Width
2150mm
• Geared three times slower than ground speed leaving a
continuous mat of feed
• Bale weight is kept over the drawbar for traction and
to eliminate the risk of the bale falling off when going
uphill
• Jack stand provided.
For more information visit www.duncanag.com or contact your local Duncan AgMech area manager:
• New Zealand – 0800 177 171 • [email protected]
• Australia (Victoria, Tasmania, South Australia & Western Australia) – Anthony White tel. 0429 112 211
• Australia (NSW & Queensland) – Mike McMahon tel. 0409 810 501
In accordance with the company’s policy of continuous improvement to its machines, alterations in specifications may be made without notice. The
company accepts no responsibility for any discrepancies which may occur between specifications of its machines and the descriptions thereof contained
in this publication – June 2014