Elvacite® 4086A for
Improved Alcohol
Resistance
Acrylic Resin
Elvacite® 4086 is a solid bead resin specially designed for use in coatings for plastics,
such as ABS, PS and PVC. It has good compatibility with many binders and
plasticisers, and has excellent solubility in a wide range of solvents. It is designed to
have an optimum combination of excellent adhesion, alcohol resistance and surface
hardness.
Performance Features and Key Benefits




Good adhesion to a variety of plastic substrates
Exceptional resistance to abrasion and moisture
Excellent ultraviolet and chemical resistance
Excellent alcohol resistance
Typical Properties & Manufacturers Release Specifications
Typical Propertiesa of Elvacite® 4086A
Appearance
Solid bead
Specific Gravity, 25° C
1.13
Glass Transition Temp, onset
98°C
Molecular Weight (Mw)
86,000
a) Typical physical properties listed are approximate values and should not be considered manufacturers release specifications.
Manufacturers release specifications are subject to change without notice, please contact your Lucite International Representative for the
latest product specification details.
Technical Data Sheet
Elvacite® 4086A v20130422
Page: 1
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its
accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed.
Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite
International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Elvacite® 4086A Manufacturers Release Specificationsb
Inherent Viscosityc
0.365 – 0.403
% Moisture (max)
0.5
% Methacrylic Acid
0.5 – 1.0
b)
c)
Manufacturers release specifications are subject to change without notice. Please contact Lucite International, Inc.
for the latest information.
Inherent viscosity of a solution containing 0.25 g polymer in 50 ml of methylene chloride measured at 20°C
using a No. 50 Cannon-Fenske viscometer
Preparing Solutions
Elvacite® resins dissolve at room temperature but require constant agitation to
prevent solvent-swollen granules of polymer from forming agglomerates and sticking
to the walls of the vessel. Important: The polymer beads should be sifted directly into
the vortex of the stirred solvent to speed wetting-out and dispersion. Continuous lowshear agitation for periods of 1-12 hours, depending on the grade and concentration
of resin, is recommended.
After the solution appears clear in the tank, a sample should be spread out on a
Leneta card or glass. After the solvent evaporates and a film forms on the card or
glass, there should not be any resin seeds. If there are any seeds, the tank should
be agitated further to fully dissolve the resin. Tank agitation should not be stopped
(except for sampling) until the film test indicates there are no resin seeds. Any
cloudiness or residue may indicate that some polymer remains undissolved. The
presence of water in the system can also cause cloudiness.
Solution time can be reduced by heating; most common solvents can be heated to
approximately 49°C (120°F) without the need for reflux equipment. High-shear
agitation also cuts dissolving time, but requires care to avoid overheating and
excessive solvent loss.
Technical Data Sheet
Elvacite® 4086A v20130422
Page: 2
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its
accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed.
Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite
International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Solvent Solubility
Table depicts the solubility of Elvacite® 4086A at 30% solids in various solvents.
Solubility of Elvacite® 4086A
Solvent
Toluene
Acetone
Methyl ethyl ketone
Dimethyl carbonate
Methyl isobutyl ketone
n-Butyl acetate
t-Butyl acetate
Ethyl acetate
n-Propyl acetate
Methyl acetate
2-propanol
Low odor mineral spirits
Solubility
S
S
S
S
S
S
S
S
S
S
I
I
Rating
C
C
C
C
C
C
C
C
C
C
-
(S = Soluble, H = Cloudy/hazy solution, C= Clear solution, I = Insoluble)
Viscosity and Gloss
The table below illustrates typical viscosities of Elvacite® 4086A in varying solvents
at 30% solids.
Solvent
Acetone
Toluene
Methyl ethyl ketone
Methyl isobutyl ketone
n-Butyl acetate
Ethyl acetate
n-Propyl acetate
Technical Data Sheet
Viscosity (cP)
Gloss (60°)
518
310
568
1220
1260
524
784
84
88
-
Elvacite® 4086A v20130422
Page: 3
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its
accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed.
Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite
International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Alcohol Resistance
The table below shows results of double-rub testing on smooth finish steel. Panels
are made by coating a 40% solids solution in n-Butyl acetate using a 5 mil doctor
blade. The panels were dried overnight then tested by rubbing with 2-propanol on
cheesecloth until the substrate is exposed.
Acrylic Resin
2-propanol
double rubs
Elvacite® 2016 (control)
Elvacite® 4086A
Technical Data Sheet
50
167
Elvacite® 4086A v20130422
Page: 4
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its
accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed.
Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite
International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.
Lucite International Inc.
The Lucite Center
7275 Goodlett Farms Parkway
Cordova, TN 38016
USA
T: +1 (901) 381 2000
www.luciteinternational.com/resins
Lucite International
Speciality Polymers and Resins Ltd
Horndale Avenue
Newton Aycliffe DL5 6YE
United Kingdom
T: +44 (0) 1325 300990
F: +44 (0) 1325 314925
www.luciteinternational.com/resins
Technical Data Sheet
Elvacite® 4086A v20130422
Page: 5
Information contained in this publication (and otherwise supplied to users) is based on our general experience and is given in good faith, but we are unable to guarantee its
accuracy or to accept responsibility in respect of factors outside our knowledge or control. Freedom under patent, copyright and registered designs cannot be assumed.
Users of this product should consult the relevant Material Safety Data Sheet. Elvacite®, Lucite® and Colacryl® are registered trademarks of Lucite International. Lucite
International Speciality Polymers and Resins Ltd is a wholly owned subsidiaries of the Lucite International Group.