Technical Document
Document Name: Operation Instruction for Update Tool
Total 5 Pages
1
Contents
1．Objective ..................................................................................................................................... 3
2.Operation Instruction ..................................................................................................................... 3
2.1 Computer settings ............................................................................................................... 3
2.2 Start Update......................................................................................................................... 3
2.3 website ................................................................................................................................ 5
3.Notes .............................................................................................................................................. 5
2
1．Objective
The Tool is the software which only be run in PC with Windows®7.
And you need to right click and run the tool as administrator.
2.Operation Instruction
2.1 Computer settings
Device settings
Obtained from webUI to the IP address of your terminal.(This IP address must be the IP address of
the factory).
2.2 Start Update.
(1) Tool runs
(2) Wait for the connection is successful, the software can Update. When connect is OK. Click the
[UPDATE] to update version.
3
(3) Please be patient and wait for the download is complete.（It cost about 12 minutes, the length
of the time spent is decided by the system enviroment）.
(4) Wait for the update successful.
4
Note: Connection time-consuming and generally not more than 150 seconds, if more than
this time still can not connect, restart the software tools and terminal. And check the port
connection.
When the update is complete for the update again or other operations, please follow the prompts.
Click OK, follow the prompts to restart the software.
2.3 website
website: http://ensupport.zte.com.cn
3.Notes
1. Your computer must have only one Ethernet port.
2. Turn off the Update process may affect the Update tool software monitoring
tools such as firewalls and other ports.
3. Please note that the Update process to shut down the computer system
resources occupied by the software.
4. Each operation will need to restart the terminal and the software.
5. Please do not close the software Update process.
6. Remove the SIM card, as well as other non-terminal equipment that comes
with the Update.
5