2
To Add a Bill to ID to a
Cisco.com profile using
the Manage by Number
screen:
Screen 1 of 2:
1. Enter a Bill to ID that you
manage.
3
1
OR
2. Select Add Bill to ID to
Cisco.com profile.
3. Click the Submit button.
OR
1. Choose a Bill to ID.
2. Select Add Bill to ID to
Cisco.com profile.
1
3
2
3. Click on the Submit
button.
Note:You cannot see a Bill to ID in the tool that you are not set up to manage it. See slide 71 for how to add Bill to IDs to your profile.
© 2013 Cisco and/or its affiliates. All rights reserved.
Cisco Confidential
1
Adding a Bill to ID to a Cisco.com profile does not allow the individual to use the Bill to ID for
support access. If you want to provide service access, select “Add Bill to ID and Enable support
access” instead.
Once a Bill to ID has been
chosen and the action Add
Bill to ID to Cisco.com
profile has been selected:
Screen 2 of 2:
1. Select one, many, or all
individuals from the list.
Or, search for an individual
and select them.
#####
1
2. Click on the Submit
button.
A success message will be
displayed. An email
confirmation will be sent to
all Administrators for that Bill
to ID as well as each
individual.
© 2013 Cisco and/or its affiliates. All rights reserved.
2
Note: If you cannot locate an individual in the tool, see the “Add Name”
instructions on the next slide.
Cisco Confidential
2
To Add a Bill to ID to a
Cisco.com profile using
the Manage by Name
screen:
Screen 1 of 2:
1. Select a search attribute
from the drop down list.
2. Enter the information you
want to search for.
3. Click on the Search
button.
A list of individuals who
match the search attribute
and criteria you entered
will appear.
1
4
2
3
6
4. Choose the individual.
5. Select Add Bill to ID to
Cisco.com profile.
6. Click on the Submit
button.
5
Note: If you cannot locate an individual in the tool, see the “Add Name” instructions on slide 28.
© 2013 Cisco and/or its affiliates. All rights reserved.
Cisco Confidential
3
Adding a Bill to ID to a Cisco.com profile does not allow the individual to use the Bill to ID for support
access. If you want to provide service access, select “Add Bill to ID and Enable support access” instead.
Once an individual has
been chosen and the
action Add Bill to ID to
Cisco.com profile has
been selected:
Screen 2 of 2:
1. Select one, many, or all
Bill to IDs from the list.
1
2. Click on the Submit
button.
A success message will be
displayed. An email
confirmation will be sent to
all Administrators for that Bill
to ID as well as the
individual.
2
Note: A message will be displayed if the individual you chose already has all the Bill to
IDs that you manage in his Cisco.com profile.
© 2013 Cisco and/or its affiliates. All rights reserved.
Cisco Confidential
4