All New HSK Spindle
Built with super-high precision and efficiency in mind, the all new Chin Hui Sheng spindle
shaper will provide a competitive edge for your shaping operations.
High Precision,
High Rigidity
HSK Spindle

The spindle is supported by P4 class precision angular contact ball bearings with superior
radial and axial loading capacity.

The high spindle speed effectively upgrades machining efficiency and workpiece surface finish.

The spindle accommodates a tool holder for shaper and router.
Tool Holder Knocking Device

Tool holder clamping and releasing are actuated by an air cylinder. This
provides quick tool change in only seven seconds.
Pneumatic Controlled Cutter Holder Lock/ Unlock

The quick cutter holder lock/unlock provides added
convenience for cutter holder changeover.

An identification lamp is provided for indicating tool holder
lock/unlock condition. When the cutter holder is well locked,
the indication lamp lights on. When the cutter holder is
unlocked, the indication lamp extinguishes.
Router Bit Holder
(optional)
ER-32 Collet (accuracy
Shaper Cutter
5µ)
Holder (standard)
Dependability Through Comprehensive Tests
Dynamic balance test
Concentricity test
Spindle taper run-out test
Running test and temperature
Accuracy in 2µ
growth inspection
Spindle Test Report
Thermal displacement
under 25mm
Dynamic balance
under G1
Noise level
under 78dB
Continuous running test for 72 hours
Spindle test conducted in a controlled
room temperature environment.
Spindle Air Blast
Reversible Spindle Rotation
Before the tool holder is clamped,
The spindle is reversible to ensure safe
an air blast cleans the spindle
rotation in clockwise and counter-clockwise
taper, ensuring high circularity
directions as well as providing the ability to
accuracy of tool hold and cutting
climb cut glued panels.
tool.
HSK63F SPINDLE SPECIFICATIONS:
Tool Rest Face O.D.
Spindle Nose I.D.
Tool Drawing Force
Taper
63 mm
38.4 mm
11 kn
1:10
Spindle Speed / Frequency Diagram