OWNER’S MANUAL
Single Round Bale Wrapper Model 480
March 10, 2008
CONTENT
1 Î ANDERSON Warranty
p. 4
Important : warranty registration form to return to Anderson
2 Î 480 General Characteristics
p. 7-8
3 Î Safety Advice
p. 9-10
4 Î Moving the Bale Wrapper
p. 11
5 Î Wrapping : Adjustments and Set up
p. 12
6 Î Beginning and Ending of a Wrapping Session
p. 13
11 Î Maintenance and Storage
p. 14 - 15
12 Î Troubleshoot : Problems and Corrections
p. 16
ANDERSON EQUIPMENT
5125 rue de la Plaisance
Chesterville (Québec)
CANADA G0P 1J0
Phone # : (819) 382-2952
Fax : (819) 382-2643
Email : [email protected]
Visit our Website Î www.equipement-anderson.com
ANDERSON’S WARRANTY FORM
Warranty form to be completed and returned as
soon as possible
Please fill out this warranty form with your new machine
information and send it by fax or by mail. This form must be
completed within 15 days after delivery to valid your warranty.
(please print)
Machine Type :
Model : ___________________________________________
Options : __________________________________________
Serial Number: _____________________________________
Purchase Date:______________________________________
Buyer’s Name: _____________________________________
Buyer’s Address:____________________________________
__________________________________________________
Buyer’s Phone Number:_______________________________
Dealer’s Name:______________________________________
Salesman’s Name: __________________________________
Salesman’s Address: _________________________________
Salesman’s Phone Number:____________________________
Salesman’s Signature:________________________________
Buyer’s Signature:___________________________________
Phone : 1-819-382-2952
Fax : 1-819-382-2643
Toll Free: 1-888-833-2952
1 Î ANDERSON WARRANTY
1.1 Î One year warranty: Anderson Equipment certify each machine of its manufacture to
be produced to meet the specifications delivered to the BUYER; and to be free from defect in material and
workmanship and will repair or replace, at its expense, for a period of one year from the delivery date of
equipment any parts which are defective form faulty material or poor workmanship.
1.2 Î Documents : When you call your equipment dealer or Anderson Equipment to order
parts or to get some help to solve a problem on your equipment, you should have on hand your purchase
order or a copy, a copy of the warranty form which gives all the necessary information about your
equipment.
1.3 Î To solve a problem: Your local equipment dealer is the place to go if you ever have a
problem with your equipment. Anderson Equipment does not normally do any field servicing. If you are not
satisfied with the way your equipment dealer has solved your problem, we suggest you to follow these
steps:
1.3.1
– First , let it be understood that our warranty will be void if your equipment has
been modified without our authorization. Let it be also understood that we are the only one to determine
the cause of the problem or how the machine was broken. Please note that all repairs MUST be authorized
before to ensure that your machine will still be covered by our warranty.
1.3.2
If your problem has already been treated by your dealer’s service department and
you are not completely satisfied please contact one of the managers within the dealership who sold you the
Bale Wrapper. In most cases, your problem with the machine can be solved at this level.
1.3.3
If you are still not satisfied with the solution after following the above procedure
please contact us directly.
ANDERSON Equipment
5125, Plaisance street
Chesterville (Québec)
CANADA G0P 1J0
Phone : 819-382-2952
Fax :
819-382-2643
Email : [email protected]
-
Furthermore, whenever you contact us either by mail or fax please supply us with the following
information
Your name, address and phone number,
Your machine model and serial number,
Your bill number and the date of purchase.
The dealer’s name, address, phone number and the salesman’s name.
A short clear concise description of the problem.
1.3.4
– After we have reviewed all aspects of the problem we will rapidly communicate
our decision to you, and if applicable any new steps to take to resolve this situation.
But in all likely-hood it is very probable that your problem will be solved at your
dealer with his team and specialized equipment. We strongly suggest that if you
need any kind of help it is very important that your first contact should be at your
dealer with your salesman.
1.4
Modifications: Given that our company’s desire is to always improve our products
our company reserves the right to modify its machines, their characteristics, and their parts at all time
without any advance notice or obligation.
It is a pleasure doing business with you.
Dany Poisson,
president
Anderson Equipment
2
1 ÎAnderson Warranty
Anderson Equipment
Warranty
A 1 year warranty will begin at the date the new equipment is sold to a customer,
but for commercial or rental purpose a 90 days warranty will be applied
and /or a maximum of 3500 bales for the in line wrapper and 2500 bales
for the individual wrapper.
1.
During the year after the purchase of a new equipment, Anderson equipment
will replace or repair any part covered by this warranty which is found to be
defective in material or workmanship during the applicable warranty term.
2.
Parts replacement or repairs on your equipment will be done by our authorize
dealer or our technician. This include parts and labour only if preauthorize by
Anderson customer service.
3.
However the customer will be responsible for any service call and for
transportation of his equipment to / and from the authorized dealer.
4.
The dealer will describe warranty details to his customer before the sale of any
new equipment. A warranty form must be completed with the sale date,
serial number and equipment description within 15 days after delivery
to the customer and fax to Anderson equipment at: 1-819-382-2643 to
validate the warranty.
5.
To get any equipment repair, the customer should, under the warranty terms
advise as soon as possible the authorized dealer of any problem with the
equipment.
6.
For all repairs, under warranty claim, the customer must give to the authorized
dealer the type of machine, model number, options, serial number, sale
date and his coordinates.
7.
Anderson equipment reserves the rights to modify the warranty policy
without any notice.
8.
Despite what preceding
3
Warranty exemption’s
1.
Articles that are cover under separate warranties like tires,
battery, hydraulic pump and Honda engine are warranted by their own
manufacturer.
2.
Damage caused by failure to maintain the equipment, misused or
operation beyond rate capacity or specifications, lack of proper protection during
storage, vandalism, the elements, collision or accident.
3.
Any equipment that has been altered or modified without our
approval and in a way that will render the equipment unstable and modified its
performance.
4.
The warranty doesn’t cover normal wear and minor adjustment (ex:
sensors adjustment, oil change, oil filter…).
5.
6.
The customer is responsible for any service and/ or traveling fees for is equipment at
any time. They are not covered by the warranty
Replacement parts and accessories that are not manufacturing or sold by
Anderson equipment and used without our authorization and not to be true to
the original and make the equipment less reliable
Implied, representation or condition
To the extend permitted by law , neither Anderson Equipment or its affiliates of
any kind makes any warranty representation, condition or promises, express or
implied, verbal or otherwise as to the quality, performance or freedom from defect
of the equipment. No implied or statutory conditions or warranties of the
merchantability or fitness are made.
Exclusive recourse
To the extend permitted by law, the buyer exclusive recourse in connection with the
lack of performance of any warranty on the equipment are those set for the above.
In no event will Anderson equipment and is authorized dealer be liable
for any accident or consequential damages or injuries including but not
limited to, loss of profit, rental of substitute equipment , other
commercial or personal loss or damages arising as a result of a
fundamental lack or lack of fundamental term.
9.
The selling dealer has no authority to make any representation or promise
on behalf of Anderson Equipment or to modify the terms or limitations of
this warranty in any way
ANDERSON EQUIPMENT
5125, Plaisance street
Chesterville (Québec) CANADA
G0P1J0
Phone : (819) 382-2952 / 1- 888- 833-2952
Fax : (819) 382-2643
4
2 Î Model 480 General Characteristics
2.1 Î Congratulations :
You are now the owner of an ANDERSON single bale wrapping
machine. This bale wrapper was design to wrap each single round hay bale to
be stored outdoor in the wintertime. A 6 foot round bale is the largest hay bale
that can be wrapped on model 480 wrappers. These bale wrappers were
carefully design and built by Anderson to give you many years of reliable service.
2.2 Î Engineering & Design :
Most parts used in our bale wrappers were design by highly
qualified mechanical engineers and technicians using the most
sophisticated software and Laser cutting equipment.
All our bale wrappers are equipped with twin geared
aluminum rollers and a plastic film stretcher, that can stretch a 30
inches (76,2 cm) wide plastic film up to 65% longer.
2.3 Î Size & Weight
Width :
Height :
Tires :
67 in (1,7 m)
78 in (2,0 m)
18,5 – 8,5 - 8
Length :
Total Weight:
133 in (3,4 m)
1500 lb (680 kg)
2.4 Î Read me:
Before getting started with your bale wrapper we recommend to read
this operation manual thoroughly, it will help you in many ways, by informing you
on all the features of this machine and by giving you advice on how to operate it
safely. If you sell your bale wrapper, do not forget to transfer this operating manual
to the new owner.
2.5 Î Modifications :
All diagrams and pictures presented in this instruction manual are the latest information
available at the time of printing. ANDERSON Machinery may modify and/or update its equipment without
notice and without any obligations.
2.6 Î Standard Equipment:
Lateral hand jack
Hands control
Email : [email protected]
5
2 Î Model 480 General Characteristics
Stretcher
Lateral support
drum
Traction roller
Hands
control
Shield
Tongue
2.6 Î Standard Equipment:
Model 480 single bale wrappers is a tow type with its wheels. Chapter #4 called Moving the
Bale Wrapper gives more information on how to move the bale wrapper machine. A geared hydraulic motor
rotates the bale wrapping platform and drives the chain driven roller of the platform. The 30 inches plastic
film stretcher helps reduce the wrapping cost of a hay bale.
Email : [email protected]
6
3 Î Security Advice
Do not step on the machine when the engine is on.
3.1 Î A competent operator works safely !!!
Your Anderson bale wrapper was conceived to work
safely when doing the type of work it was designed to do. Its
hydraulic system can handle heavy loads which can cause serious
injuries to the personnel that work near or around this type of
equipment. It is recommended to read and follow all safety advice
that appears at the most dangerous area on the bale wrapper. This
book will also give you very important advice on how to work safely.
3.2 Î Working safely
The operator and all working personnel around the bale wrapper should be well informed of the
dangers inherent to the fact of working near this type of equipment. Every one should be informed of
where are posted Emergency phone numbers, telephone facilities and first aids kits. The operator must
know which actions to take in an emergency situation.
3.3 Î Danger area :
It is the responsibility of the bale wrapper operator to inform whoever
stands within 8 feet (2.5m) of the bale wrapper that he is inside a dangerous
area.
3.4 Î Working with a farm tractor :
When the bale wrapper uses a farm tractor as the power hydraulic
unit, the bale wrapper must be properly tied to the main frame tow bar of the
tractor. The bale wrapper shall never be tied to the hydraulic lifting assembly.
The bale wrapper should be installed on a flat and level ground. It is recommended to place
wedge blocks under the wheel to keep the wrapper well in place.
3.5 Î Safety stickers :
The instructions given on the emergency stickers
placed on the bale wrapper must be observed at all time for a
safe operation. The operator must know where the panic
button (emergency stop) is and must know how to operate it in
an emergency situation.
Keep hand off the bale wrapper while wrapping a bale, moving parts, gear
wheels, moving chains can catch up any loose garment and cause very serious injuries, (the
bale wrapper is a very powerful machine, it can very easily drag weights of 500 pounds)
3.6 Î Prevention :
Avoid wearing loose garments such as long sleeves jackets, loose sweaters, scarf, and
neck handkerchief. Any loose garment can get caught by the moving parts of the wrapper and cause
serious injuries and even cause death.
It is recommended to wear hearing protection as earmuff, because long time exposure to high
noise level can cause deafness. When working in a dusty environment wearing an approved facemask is a
good practise. It is also recommended, to have a fire extinguisher handy and when working at night to
have the proper lighting equipment. Never operate the wrapper with the safety guards and safety shields
removed.
Email : [email protected]
7
3 Î Security Advice
3.7 Î Maintenance and repair :
Before doing any maintenance work or repair work, it is
important to stop the motor, remove the ignition key on the motor and release
the oil pressure in the hydraulic system. When replacing defective or worn out
parts, we recommend to always use genuine parts in order to keep your
warranty active.
3.8 Î Hydraulic oil :
High pressure hydraulic fluids can cause serious injuries if not handled with care. Any oil
leak under pressure is dangerous. To detect oil leak when the system is under pressure, the operator must
wear gloves and use a piece of cardboard. Once the oil leak is located, turn-off the pressure pump and
replace the leaking part.
Before connecting or disconnecting the hydraulic hoses the operator should stop the motor
driving the hydraulic pump and make sure the pressure is completely released before disconnecting or
connecting the oil lines and if disconnecting the lines he should cap off all oil inlets and outlets.
CAUTION : Any infiltration of hydraulic flui in or under skin should be
removed as soon as possible by a physician familiar with this type of injury. It can
cause gangrene if not taken care of in the following hours.
3.9 Î Going about on public roads :
It is the owner responsibility to know the rules and
regulations concerning farm equipment on public roads in force in your area.
We strongly recommend to lock the coupling pin and to tie a security chain
between the bale wrapper and the towing tractor.
Email : [email protected]
8
4 Î Moving the Bale Wrapper
4.1 Î Short distance moving :
The bale wrapper can be moved from place to place when
tied to a farm tractor or to a pick-up truck. When moving the
bale wrapper make sure the wrapping turntable is locked as
explained earlier in chapter 3-10. You must comply with the
public road rules and regulations in force in the operating area
concerning farm equipment.
4.2 Î Long distance moving:
For long distance hauling it is recommended to load the bale
wrapper on a flatbed truck. The wrapper can be tied to a farm tractor or
t a pick-up truck to load the wrapper on the flatbed truck. The bale
wrapper should be tied to the flatbed truck and blocking gears should
be used to prevent any movement or displacement that could damage
the wrapper.
4.3 Î Security measures :
For any means of transportation, do not step on and do not let someone step on the machine during all the
transportation time.
Email : [email protected]
9
5 ÎBale Wrapping: Adjustments & Set-up
5.1 Î New wrapper:
Once your have read the instruction manual you are ready to go through the starting
procedure. First, on a new wrapper, check if the wrapper has not been damaged during transport;
look at the electric wiring and the hydraulic systems for damages.
5.2 Î Before starting the machine : Check the hydraulic fluid level of your tractor. If
necessary, lubricate the wrapper. Each day, keep the stretcher’s roller clean. You can clean them with parts
or brake cleaner.
5.3 Î In the field :
The bale wrapper must be operated on a flat and level ground as much as possible.
Stretcher’s Aluminium
Roller
Photo 1
Rubber Roller
5.4 Î Installation du rouleau de pellicule : To
remove an empty film roll lift up the
spring loaded top plastic film guide and
slip out the bottom end of the empty roll.
To install a new plastic film roll insert the
top center of the film roll in the spring
loaded film guide and slip back-in the
bottom end of the plastic film roll and
feed the plastic film through the rubber
and aluminum stretch rollers as shown in
figure.
Caution : Leaving a plastic film roll in the sun for long
period of time will warm up and soften the plastic film, A soft plastic
film will stretch and perforate very easily
causing poor wrapping of the bales.
5.5 Î Testing the film stretcher :
To check the stretching efficiency of the film stretcher, using a felt tip marker draw a 10 inches
long horizontal line on the plastic film roll. Start the wrapping turntable for about one turn or until the line
drawn on the plastic film roll has gone through the two stretch rollers, then, stop the turntable, the 10
inches long line should now be 16 inches long if the stretch rollers are properly adjusted
5.6 Î Adjusting the two rest rollers :
These two conical shaped rest rollers are made of solid plastic matter and are mounted on each side of the
wrapping turntable between the two driving drums and are used to maintain the wrapped hay bale
centered on the wrapping turntable. The distance between these two rest rollers is adjusted at 48 inches
in order to handle 48 inches high hay bales on the turntable. They should be adjusted to take the average
size of bale you are wrapping and leaving a gap of about 3 inches on each side of the largest hay bale to
wrap. The maximum size bale that can be wrapped is 60 inches
Email : [email protected]
10
6 Î Beginning and Ending of the Bale Wrapping
6.1 – Starting-up : We suppose you have turned on your
tractor engine and connected the hydraulic system (the recommended flow
rate is 8 GPM @ 2200 psi)
Dumping
6.2 – First Bale : Bring a round bale with the tractor front
round bale grabber. Approach the wrapper by its side and place the bale
on the straps between the two drums. Attach the plastic film on the bale
twine (or net). Activate the right joystick to turn the turntable. When the
turn counter IG-C3 is flashing, it means that two turns are remaining.
Finish these turns and stop the wrapping.
Wrapping
6.3 – Dumping and 2nd Bale : Take care to align the turn table for the damping process. The
wrapper will dump the bale on its backside so the two support rollers should be on each side of the
wrapper. Besides, the driven roller must be on the backside of the wrapper so it means that the drive train
guard must be on the wrapper’s left side. Activate the left joystick to dump the bale. Activate the left
joystick on the opposite way to orient the turntable horizontally. The wrapper is now ready to wrap another
bale.
6.4 – Wrapping Ending :
After you have stored your entire wrapped bale, take the time to check if all the bales are
adequately sealed. You can seal air inlets with scotch tape if needed. Use a recommended scotch tape by
your plastic film.
Email : [email protected]
11
7 Î Maintenance and Storage
7.0 Î Servicing
NOTE : When servicing the bale wrapper always disconnect hydraulic hose from your tractor.
Refer to section # 3.7 for security advice.
7.1 Î Lubrication :
A grease gun must be used to lubricate the many grease points on
the bale wrapper:
It is recommended to use synthetic lubricating products
Every 200 bales :
- The plastic main shaft (1 grease cup)
Every 1000 bales :
- The 4 main bearing (1 grease cup at each end of driving drums).
7.2 Î Other lubrications:
Chains and sprockets of the wrapper need lubricants or grease every 50 hours. The stretcher’s
sprockets also need this maintenance.
Email : [email protected]
12
7 Î Maintenance and Storage
7.3 Î General Maintenance :
7.3.1 – The aluminium rollers and gearwheels of the film stretcher must be kept clean.
This will prevent the plastic film to perforate or tear–off. Clean the plastic film
stretcher rollers with penetrating oil, rubbing alcohol or paint thinner.
7.3.2 – Remove any hay strands that can get stuck in the shafts and/or gear wheels of
the bale wrapper in order prevent the hydraulic motor to deliver unnecessary
power.
Email : [email protected]
13
8 Î Troubleshooting: Problems and Corrections
The table below is giving the most common faults with the causes and the appropriate solution
to correct each problem. Please check that table before calling your local dealer for technical help.
8.0 Î Fault
Î Causes
8.1
–
Wrapping 1 – Low hydraulic oil level
turntable turns slow
or not at all.
2 – Low hydraulic oil pressure
Î Corrective action
1 – Check for hydraulic oil leaks and repair
2 – Add hydraulic oil if necessary
3 - High hydraulic oil temperature
8.2 – Wrapping not
adequate
1 – Plastic wrapping film perforates
or breaks while wrapping
2 – Wrapping plastic film not stretch
on hay bale
1 – a) Check if plastic film damaged, replace if
needed;
1 – b) Check film stretcher operation, remove
particles and clean;
1 – c) The plastic film is too soft, it has been exposed
to sun rays for too long: change plastic film roll;
2 – a) Check installation of plastic film, it must be
installed according to figure 5.4 p.12;
2 – b) Check stretcher for worn parts, repair &
replace parts if needed.
Email : [email protected]
14
PARTS MANUAL
Single Round Bale Wrapper Model 480
March 10, 2008
CONTENT
1 Î Main Frame
p. 1
2 Î Dumping Table
p. 2 - 3
3 Î Support Roller and Shield
p. 4
4 Î Rotary Table
p. 5 - 6
5 Î Stretcher
p. 7
6 Î Stretcher’s Support
p. 8
7 Î Stretcher’s Support Arm
p. 9
8 Î Valve Support
p. 10
9 Î Tongue
p. 11
10 Î Hydraulic Diagram
p. 12-13
ANDERSON EQUIPMENT
5125 rue de la Plaisance
Chesterville (Québec)
CANADA G0P 1J0
Phone # : (819) 382-2952
Fax : (819) 382-2643
Email : [email protected]
Visit our Website Î www.equipement-anderson.com
1 - MAIN FRAME
4
2
6
4
1
5
3
A
15
13
13
16
17
13
14
7
10
9
7
8
12
11
PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
QTY
2
6
6
8
2
1
4
2
2
2
2
2
3
1
2
2
1
PART
223003
223001
500446
501032
500442
221000
303041
481449
303078
501076
320002
481000
451172
450980
500014
501030
466000
DESCRIPTION
PIVOT AXLE
HOSE HOLDER
CARRIAGE BOLT
NYLON NUT
CARRIAGE BOLT
FRAME
BEARING
HUB
DUST CAP
CASTLE NUT
COTTER PIN
HUB CAP
HYDRAULIC ADAPTOR
HYDRAULIC ADAPTOR
BOLT
NYLON NUT
CUSHION VALVE
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 1
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
2 - DUMPING TABLE
PARTS LIST
1
ITEM
1
2
1
QTY
2
1
PART
450712
467113
DESCRIPTION
HYDRAULIC ADAPTOR
HYDRAULIC CYLINDER
2
3
4
5
13
27
11
8
21
12
20
14
16
18
19
17
7
26
25
15
24
6
2
9
22
1
10
28
23
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 2
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
2 - DUMPING TABLE
PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
QTY
1
2
2
4
4
4
1
1
2
2
1
1
1
8
8
1
1
1
1
1
1
1
2
1
1
1
1
1
PART
221001
322299
221002
500004
501030
507029
221004
224035
500180
501034
501074
300511
320017
501902
500211
481404
303490
303491
303492
303494
303493
469147
451262
300513
221005
500042
221003
315066
DESCRIPTION
TABLE
GREASE FITTING
LEFT GUARD
BOLT
NYLON NUT
METAL SCREW
GEAR
KEY
BOLT
NYLON NUT
CASTLE NUT
MITER GEAR
COTTER PIN
WHEEL NUT
BOLT
HUB
DUST CAP
BEARING
BEARING CUP
BEARING
BEARING CUP
HYDRAULIC MOTOR
GEAR
GEAR
FLAT WASHER
BOLT
RIGHT GUARD
SENSOR
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 3
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
3 - SUPPORT ROLLER AND SHIELD
PARTS LIST
4
6
5
ITEM
1
3
4
5
6
7
QTY
1
1
1
2
2
1
PART
224027
325112
325107
303045
320006
320010
ITEM
1
2
3
4
QTY
1
1
2
2
PART
223027
325120
325121
507041-2
DESCRIPTION
ROLLER AXLE
PLASTIC CONE
CAP
BEARING
SNAP RING
HITCH PIN
3
5
6
1
7
PARTS LIST
2
3
3
DESCRIPTION
SHIELD
OPERATOR MANUAL BOX
COLLAR
SELF DRILLING SCREW
4
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 4
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
4 - ROTARY TABLE
22
21
25
17
24
26
19
13
27
2
1
23
4
3
28
18
13
A
14
16
20
13
10
23
8
11
12
18
3
11
4
B
6
5
9
7
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 5
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
4 - ROTARY TABLE
PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
18
19
20
21
22
23
24
25
26
27
28
QTY
1
2
5
4
1
2
2
1
3
1
3
1
9
1
1
1
4
1
1
4
2
8
1
1
1
6
2
PART
221006
223041
500084
501032
300515
507005
303013
303015
501022
301050
507003
224035
501035
223037
301101
223035
303024
223039
223040
322603
223049
500246
223042
223031
322295
507065
500102
DESCRIPTION
ROTARY TABLE
COVER
BOLT
NYLON NUT
GEAR
ALLEN SET SCREW
FLANGE
BEARING
FLANGE NUT
GEAR
ALLEN SET SCREW
KEY
NYLON NUT
BRONZE BUSHING
BINDER
ROLLER GEAR
BEARING
TRACTION ROLLER
DRIVEN ROLLER
STRAP
SUPPORT ROLLER
BOLT
SHIELD
COVER
GREASE FITTING
BUTTON HEAD SCREW
BOLT
TRACTION ROLLER GEAR
1
3
4
PARTS LIST
ITEM
1
3
4
QTY
1
2
1
PART
224048
507005
224039
DESCRIPTION
GEAR
ALLEN SET SCREW
KEY
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 6
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
5 - STRETCHER
7
13
13
5
6
4
15
14
9
14
1
10
17
11
2
PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
8
18
16
QTY
2
2
2
1
1
2
2
1
1
1
5
2
1
8
4
1
2
2
1
PART
224067
303012
303021
279102
279100
224068
500017
224069
224066
224070
500004
224067
224071
501030
500006
224075
320022
501020
224065
DESCRIPTION
BEARING CUP
BEARING
BEARING
GEAR
GEAR
SPACER
BOLT
ROLLER
HIGHER SUPPORT
SUPPORT ROD
BOLT
BEARING CUP
COVER
NYLON NUT
BOLT
GUARD
KEY
FLANGE NUT
LOWER SUPPORT
3
12
11
14
18
14
19
15
11
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 7
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
6 - STRETCHER'S SUPPORT
6
19
5
16
11
10
14
13
11
2
20
15
4
18
3
22
2
10
15
8
17
11
7
9
23
12
21
14
16
PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
QTY
1
2
1
1
1
1
1
1
1
2
1
1
1
2
2
2
1
1
1
1
1
1
1
PART
224076
303012
502006
224077
322299
320010
224079
224081
501036
224082
224083
304007
304008
502004
500104
501032
304004
304009
500044
501031
320002
500288
507036
DESCRIPTION
STRETCHER'S SUPPORT
BEARING
FLAT WASHER
ROD
GREASE FITTING
HITCH PIN
ROD
TEFLON BRAKE
NYLON NUT
PLASTIC ROLLER SUPPORT
RUBBER ROLLER
SPRING
SPRING
FLAT WASHER
BOLT
NYLON NUT
SPRING
SPRING
BOLT
NYLON NUT
COTTER PIN
BOLT
ALLEN SCREW
1
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 8
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
7 - STRETCHER'S SUPPORT ARM
5
3
4
2
1
6
PARTS LIST
ITEM
1
2
3
4
5
6
QTY
1
6
1
2
2
6
PART
223067
500502
223068
500442
501032
501024
DESCRIPTION
ARM
CARRIAGE BOLT
REINFORCEMENT
CARRIAGE BOLT
NYLON NUT
FLANGE NUT
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 9
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
8 - VALVE SUPPORT
4
8
7
1
5
3
6
2
PARTS LIST
ITEM
1
2
3
4
5
6
7
8
QTY
2
2
1
2
2
2
1
1
PART
502003
501031
466015
500058
501032
500103
223069
315006
DESCRIPTION
FLAT WASHER
NYLON NUT
VALVE
BOLT
NYLON NUT
BOLT
VALVE SUPPORT
COUNTER IG-C3
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 10
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
9 - TONGUE
3
4
1
2
PARTS LIST
ITEM
1
2
3
4
QTY
4
1
2
2
PART
500084
322450
500442
501022
DESCRIPTION
BOLT
JACK
CARRIAGE BOLT
FLANGE NUT
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 11
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]
10 - HYDRAULIC DIAGRAM
3069-08-08
40-41
4X 5315-06-08
O
TRACTOR
5315-08-10
MALE QUICK CONNECT
SALAMI VALVE
VDM6 02D175/P01C**P01A*/U4S
40-42
5315-08-08
TRACTOR
I
5515-06-10
MOTOR
2X 5405-06-08
40-09
3X 5315-06-08
40-31
5706-06
40-08
40-29
40-30
CUSHION
40-32
DUMPING TABLE
CYLINDER
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
Toll Free : 1-888-833-2952, Phone. : 819-382-2952, Fax. : 819-382-2643, Email : [email protected]
P. 12
10 - HYDRAULIC DIAGRAM
ITEM
1
2
3
4
5
6
7
8
QTY
1
1
1
1
1
1
1
1
PARTS LIST
PART
ENGLISH DESCRIPTION
224185
HOSE 40-08
224184
HOSE 40-09
224180
HOSE 40-29
224181
HOSE 40-30
224182
HOSE 40-31
224183
HOSE 40-32
224187
HOSE 40-41
224186
HOSE 40-42
Anderson Equipment, 5125 de la Plaisance Chesterville (Québec) G0P 1J0
P. 13
Toll Free : 1-888-833-2952, Tel. : 819-382-2952, Fax. : 819-382-2643 Email : [email protected]