HOW TO APPLY FOR YOUR MYERS INDUCTION CARD
When you are executing a promotion at any Myers store in Australia, you will need to have a
Myers Induction Card.
Each person working within a Myers store, or a Myers affiliated store will need one, and these
MUST be taken with you to your shift.
You are to also give a copy to your state PC.
You can only complete this course using Internet Explorer – not Mozilla or Firefox.
STEP ONE:
Go to the website http://myercontractor.southrock.com
STEP TWO:
You need to create a new login for yourself by clicking on the bubble “create a Login ID”.
STEP THREE:
Once you have gone onto the next screen you will need to select what type of contractor you are.
Please select suppliers/demonstrators like shown, and then press next.
STEP FOUR:
The next page will ask you to fill out your personal details, such as name, email address, etc.
Please fill these in accordingly, and then click next.
A box will pop up and tell you what your login ID is. Please record this for future reference.
STEP FIVE:
Your next step is to launch the induction program, and to read through all the related material.
Please note that this site will not work if you are using Firefox or Safari – you must be
using Internet Explorer.
Press the launch button.
From here, a new screen will pop up, allowing you to begin your Myers Contractor induction
course.
STEP SIX:
Press begin/start.
You are to navigate your way through each page of questions by using the “next page” buttons on
the bottom right of the screen as shown.
STEP SEVEN:
The next page will ask you to say you agree with the terms and conditions, and you can press
“agree” once you have read these.
STEP EIGHT:
From here, read through the next pages by using the “next page” button, and educate yourself
about the rules and regulations whilst working at a Myers site.
There will be some test questions along the way, so be prepared!
Answer the questions the click submit, and you will be informed if you were right or not. Then
continue to go through the next pages.
After you have gone through all the steps of the induction, it will tell you that you are now ready to
begin the assessment. Make sure you are confident with what you have just learnt and then press
“next”.
There will be a list of 15 questions for you to answer, all multiple choice, which you will need to
answer in order to obtain your contractor card. After you have completed these questions, press
submit.
If you were successful, the screen below will appear, and you need to press the next button.
STEP NINE:
The next page will allow you to print out your Myers contractor card. You will need to do this, and
also send it to your state PC, either via fax or email.
The process is very basic, and the questions are simple. If you take the time to read through the
induction information, you won’t have any problems.
Important things to remember about the Myers induction card:



You MUST use Internet Explorer, you cannot use Firefox or Safari.
You must take a hard copy of this card with you to every Myers store
You must give a copy to your PC (Erin, Tash, Jess, Cheyne, Kelli or Trent)
Any questions, please call your state PC.