AMP-TWIST 6AS Stnd SL Jack
Spec Sheet
Leveraging the benefits of the AMP NETCONNECT XG cabling system, the AMP-TWIST 6AS Stnd SL Jack is the best solution for Category 6A shielded
applications combining quick & easy termination with superior performance. The AMP-TWIST 6AS Stnd SL Jack meets and exceeds Category 6A Component
and Class EA Permanent Link specifications for ISO/IEC 11801 Ed.2.2 when used as a component in a correctly installed AMP NETCONNECT XG cabling
system offering short lengths.
Key Features & Benefits:
• Cat. 6A Component Compliant (ISO/IEC 11801 Ed.2.2)  Ready for all existing Ethernet applications
• PoE+ Compliant (IEEE 802.3at)  Support data with power connections
• Safety Transmission Performance  Provides typical transmission values with safety margin(1)
• Short Channel Length  Cabling system capable for short channel lengths(1)
• Fast Termination  Assembly times typically lower than 1 minute with reliable termination
• Automatic Wire Cutting  The wire ends are trimmed automatically during the connection process
• Fully Shielded  Protected against electro-magnetic interferences (EMI)
• Automatic Screen Termination 360º  Ensures equipotential bonding & grounding
• Slim and compact profile  Offers superior density
• Low Profile Length  Connector suitable for narrow spaces (37mm)
• Open-Easy Access  Easily disassembled with standard screwdriver
• Re-usable  The contact design allows for multiple re-terminations
• Integrated Dust Cover  Optional protection available in different colours
• Universal wiring labels  Allows either T568A or T568B wiring patterns
• RoHS and REACH compliant  All loose parts meet relevant environmental directives
(1) Transmission Performance is detailed next page
1
For more information, visit commscope.com
AMP-TWIST 6AS Stnd SL Jack
Spec Sheet
Specification:
Modular jacks are un-keyed, 4-pair, RJ-45, with an integrated shield and fit in a 20.07x14.78 mm opening. Modular jacks are terminated using the
AMP NETCONNECT SL Series modular jack termination tool part number 1725150-x. Each modular jack can be wired to [T568A or T568B] and can
accommodate cable with a cable diameter range from 5.00 to 9.00mm. The insulation displacement contacts are capable of terminating [22-26 AWG solid
and 24-26 AWG stranded] conductors with a maximum insulation diameter of 1.60 mm. [Each jack incorporates an integral, hinged dust cover]. Modular
jacks have part number [2153000-1 or 2153001-1].
(2) Text in brackets [ ] requires a choice
Applicable Standards:
•
•
•
•
ISO/IEC 11801 Ed.2.2: ANSI/TIA 568-C.2: ISO/IEC 60603-7-1 3rd Edition: ISO/IEC 60603-7-51 1st Edition: • IEEE 802.3an: • IEEE 802.3at: Generic Cabling for Customer Premises
Balanced Twisted-Pair Telecommunications Cabling and Components Standards
Connectors for electronic equipment: Detailed Specification for 8-way, shielded free and fixed connectors
Connectors for electronic equipment: Detailed Specification for 8-way, shielded free and fixed connectors,
for data transmission with frequencies up to 500MHz
Physical Layer and Management parameters for 10 Gb/s operation, Type 10G-BASE-T
Data Terminal Equipment (DTE) Power via Media Dependent Interface (MDI)
Performance Details:
Permanent Link:
Common permanent link configuration1
Channel:
Minimum lengths2
Typical margin values vs limit3
IL
RL
NEXT
PS NEXT
ACR-N
PS ACR-N
ACR-F
PS ACR-F
PS ANEXT
PS AACR-F
4%
4 dB
3 dB
5 dB
6 dB
8 dB
8 dB
10 dB
12 dB
20 dB
1
2-Conn Class EA permanent link 10m using AMP NETCONNECT XG cabling components according ISO/IEC 11801 Ed.2.2
2
4-Conn Class EA channel using AMP NETCONNECT XG cabling components according ISO/IEC 11801 Ed.2.2
3
4-Conn Class EA channel 100m using AMP NETCONNECT XG cabling components according ISO/IEC 11801 Ed.2.2
2
For more information, visit commscope.com
AMP-TWIST 6AS Stnd SL Jack
Spec Sheet
Technical Details:
Materials:
Modular Jack (front and rear housing)
Zinc Alloy
IDC Connecting Block & Lacing fixture
Polycarbonate, 94V-0 rated
Contacts
Beryllium copper, plated with 1.27 μm [50 μin] thick gold in localized area and 3.81μm [150 μin] minimum
thick nickel under plate and 3.8 μin minimum thick tin in solder area over 1.27 μm min. thick nickel under plate.
Cutting Blade and Shield Point Contact
Stainless Steel
Insulation Displacement Contacts
Phosphorous bronze, plated with 3.81 μm [150 μin] minimum thick matte tin over 1.27 μm [50 μin] minimum
thick nickel under plate.
Integral Dust Cover
Polycarbonate
Electrical Characteristics:
Voltage
150Vac max.
Current
Signal application only (0.75A)
Operating Temperature
-10° to 60°C (14° to 140°F)
Environmental Conditions:
Thermal shock resistance
According IEC 60068-2-14
Humidity-temperature cycling resistance
According IEC 60068-2-38
Stress relaxation resistance
According IEC 60068-2-2, Test method Ba
Flowing mixed gas corrosion resistance
According IEC 60068-2-60 Test Method C
Mechanical Characteristics:
Modular Jack (Interface durability)
750 mating cycles
Plug insertion/withdrawal force
30 N maximum
Insulation Displacement Contacts
Accept solid 22-26 AWG and stranded 24-26 AWG with a maximum insulation diameter of 1.60 mm
Cable outside Diameter
Accepts cables with a maximum O.D. of 9.00 mm
Flush Mount Panel Cut-out
Single Panel Cut-out
Note:
Cut-outs not applicable to jacks
with dust covers
3
For more information, visit commscope.com
AMP-TWIST 6AS Stnd SL Jack
Spec Sheet
Ordering Information
Description
Part Number
-x
color
AMP-TWIST 6AS Stnd SL Jack with dust cover
2153000-1
-6
blue
AMP-TWIST 6AS Stnd SL Jack without dust cover
2153001-1
-7
red
1-1711691-X
-8
yellow
-9
green
Coloured dust covers (per bag of 50 pieces)
N.B.: Specifications subject to change without notice
www.commscope.com
Visit our website or contact your local CommScope representative for more information.
© 2015 CommScope, Inc. All rights reserved.
AMP NETCONNECT, AMP-TWIST and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties
relating to CommScope products or services.
PS-322421-AE (12/15) previously 2153000-1