SELECTION GUIDE FOR ROUND POLES AND SQUARE POLES
BOLT-ON MOUNT
3” REDUCED
5” TRADITIONAL
2X 9/16” - 7/8” SLOT
DRILLING PATTERN
1-1/16”
(27mm)
2-1/2”
(64mm)
DRILLING PATTERN
3-1/2”
(89mm)
4-5/8”
(117mm)
1-1/2”
(38mm)
2-1/8”
(54mm)
Ø 5/8”
9/16” DIA. HOLES
(TYP. 2 PLCS.)
3/4” DIA. HOLE
Use when mounting the below fixtures & bracket/fixture combinations:
Use when mounting the below fixtures & bracket/fixture combinations:
ROUND POLES - 4RPB3 / 5RPB3
ROUND & SQUARE POLES - 4RPB5/5RPB5/4SQB5/5SQB5/6SQB5
• XLCS & XLCM (requires X4RPP or X5RPP)
Round pole plate is required on Round Poles, except for HFR & XSB fixtures.
• PASU, XASU & XAMU (requires X4RPP or X5RPP)
CH2HM
CHH
CT2H
• XPMAR Option on XPWS3, XCHWM3, XGBWM3 & PWM
CTL
CTM
CVF
• SA4 & SA5 Mounting Styles on XENM, ENS, ENM,
& Lifestyle XDLS & XDLM
GFM
GFR
HFR
• BK SPT BO 4 & BK SPT BO 5 Accessories in Single, D180 or
other multiple mounting configurations on ENS & LXS
PTH
PTHS
XCHM3
XGBM
XPT3
XPTS3
XSB
XLCL
• BK MPT BO 4 & BK MPT BO 5 Accessories in Single, D180 or
other multiple mounting configurations on XCN3, XENM,
XLXM, ENM & LXM
SQUARE POLES - 4SQB3 / 5SQB3
• PASU
• XAMU
• XASU
• XPMA Option on XPWS3,
XCHWM3, XGBWM3 & PWM
• XLCS/XLCM
PMA (for Square Pole) & PMAR (for Round Pole) Options on CHWS,
CHWM, GBWS, GBWM, HIWSD, HIWS and PTWS
TENON MOUNT
ROUND POLES AND SQUARE POLES WITH
N TENON MOUNTING CONFIGURATION
5” DIAMETER ROUND POLES WITH 4N TENON MOUNTING
CONFIGURATION
4RPN / 5RPN / 4SQN / 5SQN / 6SQN
with N Tenon Configuration
5RPN with 4N Tenon Configuration
N = 2-3/8” O.D.
X
4-3/4” tall
Select this Tenon Mounting Configuration to use with vertically
mounted tenon brackets shown on pages titled • Area Lighting Brackets - Tenon Mount
• Flood Lighting Brackets
• Area Light Brackets - 3” Reduced Drill Pattern - Tenon
Brackets
4N = 4” O.D.
X
4-7/8” tall
4N Tenon Mount Configuration is available with 5RPN only. (See 4RPSF
for 4” poles). Select to use with:
• Lifestyle CH mounting styles
• Constitution, Enterprise & Lexington PT Single mounting
styles (For D180 or other mounting configuration styles requiring BK
SPT BO or BK MPT BO accessories, see Bolt-on Mount 4RPB3 /
5RPB3 drilling pattern section.)
OUTDOOR
Subject to change. Consult factory.
ARRA
Funding Compliant
Project Name
196
Catalog #
Fixture Type
10/22/15
© 2015
LSI INDUSTRIES INC.