Hardware connection
Power the LS-Q3/Q3-C/Q2 LED MediaPlayer, connect the LS-Q3/ Q3-C/Q2 LED MediaPlayer
with LS-R301A Receiving card via Ethernet port. Both 1000MB A LAN port or 1000MB B LAN
port on LS-Q3 are okay.
Cascade settings for the receiving cards LS-R301A via the Ethernet cable .
Connect the LS-Q3 LED MediaPlayer with PC or router(wired or wireless) from 100MB LAN port
via Ethernet cable.
Software settings
Screen Parameter Settings
Input password “888”,then login .
Change the software language as you needed, like “English”.
New Program under “File” Menu.
Set ScreenParameter under the “Sets” Menu .
Click “Search” button to search the IP address of LS-Q3/Q2 LED MediaPlayer .
Make sure your local PC and LS-Q3/Q2 LED MediaPlayer are in same network segment .
Right click the IP address,then “Assign to current screen” .
Then the IP address from “screen list” has been modified to 192.168.1.216 .
If communicate failed, please double click the IP address to modify the LS-Q3’ ip address.
Click “Set Para”to configure the screen parameter.
Basic settings for the whole led panel :
Choose the right model as your real hardware, set the real whole width and height
by pixel for your led panel .
Cascade settings for the receiving cards LS-R301A ;
How many pcs of receiving card LS-R301A in horizontal ?
How many pcs of receiving card LS-R301A in vertical ?
Then fill in the real pixels for each receiving card LS-R301A according to your real hardware
connection .
Then click the square according to your real led display panel .
After finish, then click “confirm” .
Scan type Settings
Choose the correct scan type from the regular route list ,then “Confirm” .
Color Settings
Click “Color settings 1”,then choose the correct color according to led panel displaying.
The others are the same as the above.
Select the storage way
If no SD card is in the LS-Q3/Q2 LED MediaPlayer, please choose “Flash” .
If SD card is in the LS-Q3/Q2 LED MediaPlayer, please choose “SD Card ”.
After finish configuration, then “send” .
Edit Program
Add “Picture” under Program 1, adjust the width/height for picture area, choose the
EnterStyle/ExitStyle, Speed/Remain Time as you requested.
Right-click the “Program 1” to set the Program PlayType.
Then “Send” .
Select “screen” which needs to be released.