PHYSICAL ACCESS SOLUTIONS
Single-Technology
Cards with HITAG
LOW FREQUENCY HITAG 1 CARDS
ƒƒ
Reliable design – Read/write identification card (125 KHz) for use in contactless
applications.
ƒƒ
Standard-based solution - Meets ISO/IEC standards for thickness and use with all
direct image or thermal transfer printers.
ƒƒ
Secure design - Reliable data transmission with possible mutual authentication and
data encryption for strong confidentiality.
HID Global’s HITAG 1 low frequency card
is the ideal solution for harsh environment
applications, where highly reliable, robust
and safe data transmission is required.
platform available, Genuine HID solutions
reinforce the long-standing trust that when
customers purchase from HID Global, they
are investing with absolute confidence.
With the popularity and long term
presence of HITAG in the market,
these cards can be used in a wide
range of applications supporting
the existing base of HITAG 1-ready
readers available on the market.
HID Secure Identity Services™
HID Global delivers a comprehensive
suite of services to help customers
address every aspect of their card
issuance requirements, including
managing the daily flow of ID card
badge requests, large-volume re-badging
projects, producing cards with a specific
technology, or combining multiple
technology platforms (such as magnetic
stripe and/or barcode) onto one card.
The cards fully leverage the security and
flexible non-volatile memory available
in the HITAG technology, and offer the
perfect balance of performance and cost
efficiency for any HITAG 1 deployment.
Genuine HID®: Invest with Confidence
As with all Genuine HID products, the
HITAG single-technology cards are part
of the broadest product line of trusted
secure identity solutions in the market
and include a lifetime warranty.
Supported by industry-leading expertise
and the strongest delivery and response
hidglobal.com
For a more comprehensive solution,
HID Global can also offer the HITAG 1
card with multiple technologies such as
iCLASS® to facilitate migration from a
low frequency system to high frequency
card solution with increased security.
HITAG 1 TECHNOLOGY:
■
Identitfication transponder that supports encrypted RFID data
transmission as well as data integrity check (including support
for mutual authentication for controlled access to memory
resource)
■
Operating frequency range from 120 to 130 KHz with bidirectional data transmission in full duplex mode
■
Programmable memory (EEPROM) size with 2048 bits (2 K
Byte providing extended space for data storage)
■
Selective protection of memory content
■
Read/Write memory chip for simplified data management
■
Unique 32-bits (4 bytes) serial number
■
Standard-based solution
– Card physical dimensions with ISO/IEC 7810
– Tested according to ISO/IEC 10373 for bending/torsion and
resistance to temperature tests
SPECIFICATIONS
HITAG 1
Base Part Number
Operating frequency
Typical Maximum Read
Range
Dimensions
Construction
Operating Temperature
Weight
Memory Size / Application
Areas
Memory Endurance
Data Retention
Contact Smart Chip
Embeddable
Magnetic Stripe
Printable
Slot Punch
HID Secure
Identity Services
North America: +1 949 732 2000
Toll Free: 1 800 237 7769
Europe, Middle East, Africa: +44 1440 714 850
Asia Pacific: +852 3160 9800
Latin America: +52 (55) 5081 1650
h id g l o b al.com
An ASSA ABLOY Group brand
© 2012 HID Global Corporation/ASSA ABLOY AB. All rights
reserved. HID, HID Global, the HID Blue Brick logo, the Chain
Design, iCLASS, Genuine HID and HID Secure Identity Services
are trademarks or registered trademarks of HID Global or its
licensor(s)/supplier(s) in the US and other countries and may
not be used without permission. All other trademarks, service
marks, and product or service names are trademarks or registered
trademarks of their respective owners.
2012-11-27-hid-hitag-singletech-lowfreq-cards-ds-en
1546
125 kHz
Up to 2.283" (5.80 cm)
2.127˝ x 3.375˝ x 0.030˝ max (5.40 x 8.57 x 0.76 ± 0.0076 cm)
100% PVC
-31° to 122° F (-35° to 50° C)
0.19 oz (5.5g)
Total memory size 2048 bits
organized in 64 pages of 4 bytes each
Min 100,000 erase/write cycles
Min 10 years non-volatile data retention
No
Optional
Yes (white/white card)
Usable with direct imaging and thermal transfer printers
(from HID and other suppliers)
Some exclusion areas for printing are defined
Vertical only
Customized cards (including custom artwork) are available through HID Secure
Identity Services™
Visual Security Options
Optional including hologram, anti-counterfeiting,
holographic foil
Warranty
Lifetime, see complete warranty policy for details