XFPS Commando Manual
Before using this product, please read this manual carefully and retain it for future reference.
A.
Function and Feature:
Compatible with all versions of Xbox 360™, Xbox 360™ Slim, PS3™, PS3™ Slim and PC.
Compatible with Xbox 360™ Wired Headset.
Compatible with the latest PS3 firmware.
Consist of 2 devices: XFPS mouse and controller.
Instant plug and play technology.
Wireless design.
Ideal for use with all FPS titles.
Super high sensitivity precision and smoothness.
Move 180° across the scene faster.
Built-in auto-fire function.
B.
Package Includes:
Receiver, Mouse, Left controller and Instruction manual.
C.
Layout:
(1）——USB Plug (Connects to PS3™, Xbox 360™ or PC)
(2）——Receiver Program Indicator
(3）——Matching Code button (Used for syncing to XFPS mouse and XFPS controller)
(4）——Program Switch
(5）——Default/Set Switch
(6）——Turbo Switch
(7）——USB Port (Connect PS3™ or Xbox 360™ wired controllers)
(8）——Power ON/OFF
(9）——Code button (Sync with XFPS Commando receiver)
(10）——Battery cover
(11）——180 o Right turn / Adjust (increase) the mouse sensitivity/Speed +
(12）——RC/R3 button
(13）——180o Left turn / Adjust (decrease) the mouse sensitivity/Speed (14）——Program Indicator (Mouse)
(15）——START/
(16）—— A/X, B/●, X/■, Y/▲
(17）——LB/L1 button
(18）——LT/L2 button
(19）——Battery cover
(20）——Code button (Sync with XFPS Commando receiver)
(21）——Joystick
(22）——GUIDE/
(23）——Program Indicator (Left hand controller)
(24）——BACK/SELECT
(25）——D-Pad
D.
Loading the Battery:
The mouse and controller each require a AA size battery
Open the mouse battery cover (10), insert one (1) AA battery and switch the power ON/OFF (8) to ON.
The mouse will be in standby mode.
Open the controller battery cover (19) and insert the battery.
Note: If the receiver does not have power for more than 1 minute or if no buttons on mouse/controller
were pressed for more than 3 minutes, the mouse and controller will enter into standby mode for saving
power. If not using a long period of time, please take out the batteries.
E.
Using on PS3™/PS3™ Slim console:
1. Plug XFPS Commando receiver USB plug (1) into the PS3™/PS3™ Slim console and the receiver
indicator (2) will light up and change colors between red-green-blue (in rotation).
2. Switch on the power (8) and press the START/
button (15). The indicator (14) will light up.
3. Press the XFPS Commando controller (15) GUIDE/
(22) button and the indicator (23) is ON.
4. Now the XFPS Commando will now be connected to the PS3™/PS3™ Slim console.
5. To connect a PS3™ controller to the XFPS Commando, connect PS3™ controller with USB cable to
XFPS Commando receiver USB port (7) and the indicator (2) will change to BLUE and will brighten.
If pressing the PS Home button on PS3™ controller, you can use the PS3™ controller instead of the
XFPS Commando (mouse and controller). If you want to change back to using the XFPS Commando,
simply press the GUIDE/ (22) on the XFPS Commando (controller) or unplug the PS3™ controller
and it will go back to the XFPS Commando’s function.
F.
Using on Xbox 360™/Xbox 360™ Slim:
1. Plug XFPS Commando receiver USB plug (1) into the Xbox 360™/Xbox 360™ Slim console and
the receiver indicator (2) will light up and change colors between red-green-blue (in rotation).
2. Switch on the power (8) and press the START/
button (15). The indicator (14) will light up.
3. Press the XFPS Commando controller (22) GUIDE/
button and the indicator (14) is ON.
4. Now the XFPS Commando will now be connected to the PS3™/PS3™ Slim console.
5. To connect a Xbox 360™ wired controller to the XFPS Commando, connect Xbox 360™ wired
controller to XFPS Commando receiver (7) and the indicator (2) will change to GREEN and will
brighten. If pressing the GUIDE button, you can use the Xbox 360™ wired controller instead of the
XFPS Commando (mouse and controller). If you want to change back to using the XFPS Commando,
simply press the GUIDE/ (22) on the XFPS Commando (controller) or unplug the Xbox 360
™ wired controller and it will go back to the XFPS Commando’s function. (Note: The XFPS
Commando must be used with Xbox 360™ wired controller. No Play & Charge Kit.)
6. To use the PS3™ controller, you have to use the Xbox 360 wired controller and follow the steps of
6-4 then unplug the Xbox 360™ wired controller, the XFPS Commando takes the function, now plug
in the PS3™ controller , the XFPS commander receiver indicator (2) turns GREEN and brighten,
press the PS key on PS3™ controller, you can use the PS 3™ instead of the XFPS Commando
(mouse and controller),if you want to change back to the XFPS commando, simply press the
GUIDE/ (22) on the XFPS Commando (controller) or unplug the PS3™ controller, it will go back
to the XFPS Commando’s function.
Note: When using the Xbox 360™ wired controller, you use Xbox 360™ headset for Live playing.
G. Using on PC:
1. Plug XFPS Commando receiver USB plug (1) into the PC and the receiver indicator (2) will light up
and change colors between red-green-blue (in rotation).
2. Switch on the power (8) and press the START/
button (15). The indicator (14) will light up.
3. Press the XFPS Commando controller (22) GUIDE/
button and the indicator (14) is ON
4. Now the XFPS Commando is now connected to the PC.
5. When using the XFPS Commando on PC, the XFPS Commando receiver USB port function will be
sealed off. You will not be able to connect a PS3 or Xbox 360 controller.
H. Adjusting Mouse Sensitivity :
1. Holding the RC/R3 button (12) on the mouse then pressing the
key will increase sensitivity.
Each press will increase the mouse sensitivity for 1 level. You can increase up to 32 levels.
2. Holding the RC/R3 button (12) on the mouse then pressing the
key will decrease sensitivity.
Each pressing will decrease the mouse sensitivity for 1 level.
3. Holding the RC/R3 button (12) on the mouse then pressing the START/
sensitivity level to the middle level (level 16).
once will set the
4. The sensitivity setting of each console can be saved on the XFPS Commando receiver respectively.
I.
Turbo function setting:
XFPS Commando has 8 Turbo/Rapid Fire switches. The speed of Turbo/Rapid Fire is 20 shots per
second.
Note: Turbo feature does not work on PC.
J.
Default configuration:
On the XFPS Commando receiver, if the Default/Set Switch (5) is set to Default, the Default setting of
the 3 devices are as below:
K. Custom configuration:
1. If you want to do a custom setting for the Xbox 360™, please connect a Xbox 360™ wired
controller to the XFPS Commando receiver and switch the DEFAULT/SET(5) button to SET. For
instance, if you want to set the "A" button on Xbox 360™ wired controller to the "B/●" button on
the mouse of XFPS Commando, the steps are as below:
First, press the "P" program switch (4), the program indicator (2) changes to RED and will brighten.
Now press the "A" button on the Xbox 360™ wired controller and wait until the Receiver Program
indicator (2) flashes, then press the "B/●" key on the mouse. The "Program LED indicator" will
stop blinking. Your programming is completed.
2. Clear the Custom configuration.
First, press the "P" program switch (4), the program indicator (2) changes to RED and will brighten.
Now press the mouse "B/●" key and the function on "B/●" key is now set back to default.
3. To erase all programmed configurations on your XFPS Commando, simply press the "P" button (4)
for 3 seconds until the Receiver Program indicator (2) stops blinking.
4. All programming will be saved on the XFPS Commando even if the device is disconnected and
turned off. There is no need to reprogram your custom configurations on the next usage.
5. Some keys can’t be programmed
On the mouse : the mouse movement (FRONT, BACK, LEFT, RIGHT)
and
On the XFPS Commander controller, the GUIDE/
key and the direction key
Note: The Custom configuration doesn’t work on PC.
L.
The status of the indicator (on the receiver):
1. When the indicator changes color between red-green-blue (in rotation). the XFPS Commando
receiver hasn’t connected to any controller.
2. BLUE color lights up: Successfully connected to the PS3™ wired controller.
3. GREEN color lights up: Successfully connected to Xbox 360™ wired controller.
4. GREEN color blinking: The receiver enters the matching code status.
5. RED color lights up: The receiver enters the matching code status and waiting for the button to be
pressed on PS3™ or Xbox 360™ wired controller.
6. RED color blinking slowly: The receiver enters the matching code status and waiting for the button
to be pressed on the XFPS Commando mouse or on the XFPS Commando controller.
7. RED color blinking quickly: The receiver enters the clear all configuration status.
M. The status of the indicator (on the mouse):
1. BLUE color blinking slowly: The mouse has not received the signal from the receiver.
2. BLUE color lights up: Mouse and receiver connected.
3. BLUE color blinking quickly: Mouse and receiver enters the matching code status.
4. BLUE color blinking slowly: Mouse has not received the signal from the receiver.
5. BLUE color lights up: Mouse and receiver connected.
6. BLUE color blinking quickly: Mouse and receiver enters the matching code status.
N.
The indicator status (on the XFPS controller):
1. BLUE color blinking slowly: XFPS controller has not received the signal from the receiver.
2. BLUE color lights up: XFPS controller and receiver connected.
3. BLUE color blinking quickly: XFPS controller and receiver enters the matching code status.
4. BLUE color blinking (one long, one short): If the XFPS controller indicator blinks for 2.5 seconds
long and 1 second short, that means the battery power is low and it needs to be replaced.
O. Matching the code:
Each set of XFPS Commando have been matched together between the receiver and mouse/controller
from the factory. So there is no need to set them together. But if you replace one of them, you have will
have to match the code of all 3 devices again.
1. Replacing the XFPS mouse:
Connect the XFPS Commando receiver to PS3™/Xbox 360™/PC and switch on the mouse’s power
(8). Press the "START/ " (15) and the mouse indicator will blink. That means the mouse and
receiver do not have a matching code. Now press the “Matching Code button” (3) and the “Receiver
program indicator” (2) changes to GREEN color and blinks quickly. Press the XFPS mouse “Code
button” (9) and the “Receiver program indicator” (2) will stop blinking. The matching code
procedure is successful.
2. Replacing the XFPS controller:
Connect the XFPS Commando receiver to the PS3™/Xbox 360™/PC and press the XFPS controller
"GUIDE/ " key (22). The XFPS controller indicator (23) will begin to blink, that means the XFPS
controller and receiver do not have a matching the code. Now press the “Matching code button” (3)
and the “Receiver program indicator” (2) changes to GREEN color and blinks quickly. Press the
XFPS controller “Code button” (20) and the “Receiver program indicator” (2) will stop blinking.
The matching code procedure is successful.
Or press the XFPS controller “Code button” (20), then press down the receiver “Matching code
button” (3). This method also works the same as above.
3. Replacing the XFPS receiver:
Following the above steps 1 and 2, the receiver will the synced to both the XFPS mouse and XFPS
controller.
4. If you can not complete the matching procedure within 15 seconds, the system will go out of the
matching code status.