<<
>>
Index
AIR LINE FILTER COMBINATION UNITS
EFFICIENT - ECONOMICAL - DEPENDABLE
•
•
•
•
•
•
•
SPECIFY
PORT
SIZE
FOR PRESSURES 0-150 P.S.I.G.
TEMPERATURE RANGE 41° TO 140°F.
THREE PORT SIZES AVAILABLE.
FILTER BOWL CAPACITY 4 oz. w/MANUAL DRAIN.
FILTER RATING 40-60 MICRON.
LUBRICATOR CAPACITY 4 oz. PLASTIC BOWL.
2” 0-160 PSI PRESSURE GAUGE WITH
PROTECTIVE RUBBER BOOT
INCLUDED WITH EACH UNIT.
• MOUNTING BRACKET
/4” )
6-1 ouble
(d
(de4-1/2
pth ”
)
3” gle)
(sin
FILTER/REGULATOR/LUBRICATOR
Filter/Regulator
(2.5 lbs)
Lubricator
(2.0 lbs)
AVAILABLE
WITH OR WITHOUT
LUBRICATOR
PART NO.
AMC420D
AMC421D
AMC422D
5(to 5/8”
por
9-1
t)
(he /2”
igh
t)
PORT SIZES
1/4" NPTF
3/8" NPTF
1/2" NPTF
PRICE
$65.00
65.00
65.00
FILTER/REGULATOR
PART NO.
AMC403D
AMC404D
AMC405D
PORT SIZES
1/4" NPTF
3/8" NPTF
1/2" NPTF
PRICE
$48.00
48.00
48.00
ELASTOMER MATERIAL INFORMATION
• EPDM (ethylene propylene diene monomer) – Very resistant to weathering and ozone, good to very good aging resistance
and low temperature flexibility, low electrical conductivity and resistance to polar chemicals. It is used most often in the
construction and automotive industries. Proposed as a natural rubber substitute in tires.
• Viton - Is the most specified fluoroelastomer, known for its excellent (400°F/200°C) heat resistance. It offers excellent
resistance to aggressive fuels and chemicals. This compound is used extensively in applications including automotive, fluid
power devices, industrial appliances and chemical plants. Ideal as gaskets, o-rings, oil seals, hose, tubing and diaphragms.
• Neoprene - Maintains its strength, flexing, twisting and elongation well over a wide temperature range with good resistance
to oil, solvents, heat and weathering. It was Americas first successful synthetic rubber.
• Nitrile (Buna N) - A copolymer of butadiene and acrylonitrile. In addition to its excellent elastomer properties, it is resistant
to oils, fats, caustics, and aliphatic hydrocarbons such as motor fuels. Useful as motor gaskets, conveyor belts and hoses.
Nitrile is not suitable for solvents and chlorinated hydrocarbons. It’s maximum temperature limit is 212°F.
• SBR (styrene-butadiene rubber) - Very economical and possesses no unique chemical resistance properties. This rubber
can be compounded to provide very fine abrasion, wear and tensile qualities and often substituted for natural rubber in
many applications with significant cost savings. Widely used in the HVAC and construction industries, this is a good choice
when deciding to choose a material that has good mechanical properties and flexibility.
• Silicone Rubber - This rubber is inert, very flexible and can be used in medical and FDA environments. In addition to high
temperatures, silicone has superior resistance to water and works well as an electrical insulator. Silicone RTV is a ideal
caulk and sealant.
PLASTIC
PROCESS EQUIPMENT
, INC. www.ppe.com • e-mail: [email protected]
6385 Montessouri Street, Las Vegas, Nevada 89113
11218 Challenger Avenue, Odessa, Florida 33556
PPE
W E S T
PPE
470
702-433-6385 • 800-258-8877 • Fax: 702-433-6388
PPE
SOUTH
727-834-8888 • 800-282-6783 • Fax: 727-834-8873
Toll Free: USA, Canada & Mexico
8303 CORPORATE PARK DRIVE, MACEDONIA (Cleveland), OHIO 44056, USA
216-367-7000 • Toll Free: 800-321-0562 • Fax: 216-367-7022 • Order Fax: 800-223-8305 800-362-0706