24V IP68 Single Round Top LED Flex
Description
Single colour IP68 LED flex ideal to be used for architectural features including stairs,
bar edging, floor marking, signage, marine or outdoor lighting. IP rated accessories
and connector kits are available. Any joints or termination points are maximum IP65
rated. This LED flex is highly flexible with a minimum bend radius of 12cm and has
cut points every 6 LEDs. Very low power consumption of 12W per meter. For runs
over 10m individual lengths should be connected in parallel. A 24V DC Constant
Voltage LED driver is required (see driver options table). Reel length 10m.
3 year warranty.
Specification
IP Rating
Technology
LED
No of LEDs /m
60
Dimmable
Yes
Lifetime
12mm
CUT AT INDICATED CUT POINTS
25,000
Colour Rendering (Ra)
>70
Input Voltage
24V
Input Frequency (Hz)
Sku Code
29 mm
IP68 (Joints IP65)
-
Wattage
/m
Luminous
Flux/m
Efficacy
LL/CW
Colour
Temp (K)
AU-ST106AW
12W/m
375lm/m
31
5700K
AU-ST106AWW
12W/m
375lm/m
31
2700K
AU-ST106ABLU
12W/m
-
-
Blue
LED Strip
Colour options W (White), WW (Warm White) or BLU (Blue)
Sku Code
Description
Metres per driver
LED Drivers
AU-LED1624IP
16W IP68 24V DC Non-Dimmable Constant Voltage LED Driver
1m
AU-LED2524CV
25W 24V DC Non-Dimmable Constant Voltage LED Driver
2m
AU-LED5024CV
50W 24V DC Non-Dimmable Constant Voltage LED Driver
4m
AU-LEDD9024
90W IP67 1-10V Dimmable 24V Constant Voltage LED Driver
7m
AU-LED24150IP
150W IP67 24V DC Non-Dimmable Constant Voltage LED Driver
12m
AU-LED24200IP
200W IP67 24V DC Non-Dimmable Constant Voltage LED Driver
16m
AU-LED32024CV
320W 24V DC Non-Dimmable Constant Voltage LED Driver
26m
186
FOR 24V DRIVERS
SEE PG.239