Â
Series 3000
Single-Round Housings
Modular housing design makes it easy to
meet process and geographic requirements
E Easy to configure
E Fast delivery
E Economical
Build the right housing to meet your process and geographic requirements.
It’s easy with Millipore’s Series 3000 modular housing line. This standard
product offering has the options and flexible configurations you want.
Available in T-line, C-line and In-line designs; with a wide range of tube sizes,
inlet/outlet and vent/drain connections, you can quickly and easily select,
configure and purchase the right housing for your process needs. Utilizing the
same standard components to build all housings ensures consistent quality and
performance at every location around the globe.
E Modular design will meet
the needs of a broad range
of applications
D A T A
S H E E T
E Satisfies U.S., European
and Japanese design and
manufacturing standards
E Standard design ensures
consistent quality around
the world
Ready for International
Deployment — Available
ASME and CE Compliant
From France to India, and North
America to Japan, Millipore has been
designing and installing quality
filtration systems for 50 years. We’ve
brought our experience and the needs
of our worldwide customers together,
creating one standard housing line
that will satisfy the rigorous requirements of multiple global standards’
organizations—the Series 3000
housings.
This conformance ensures that
Series 3000 housings deliver safe,
reliable performance and process
separation consistency, from scale-up
through manufacturing expansion.
Customers can rely on Millipore
for their filtration processes in any
production facility around the world.
Use our quick and easy
on-line selector
to configure your housing.
www.millipore.com/housings
Certified to 9001 Quality
Standard for Dependability
Series 3000 housings are manufactured at sites that are certified to the
ISO ® 9001 quality standard, following quality management principles
of the customer satisfaction and
continuous improvement, these sites
consistently produce high-quality
product. All housings are shipped
with a Certificate of Quality that
confirms conformance to stated
requirements and lists appropriate
QA lot release criteria.
The Choice is Yours
Series 3000 In-Line Single-Round Housings
Inlet
Outlet
Vent and Drain*
European Version
European Version*
• Ferrule (11¤2 in.)
• Butt Weld (ISO, DIN)
• Ferrule (ISO, DIN)
• Flange (ISO, DIN)
• Butt Weld
• Ferrule/
Sanitary Flange
• Valve
• None
U.S. Version
• Sanitary Flange
(1 in. or 11¤2 in.)
Japanese Version
• Ferrule (ISO 1S or 1.5S)
U.S. Version
Inlet
Vent
• Sanitary Flange
(1 in. or 11¤2 in.)
Japanese Version
• Ferrule (ISO 1S or 1.5S)
In-line Connection
Drain
Outlet
Series 3000 T-Line Single-Round Housings
Inlet/Outlet
Gauge Port
Vent and Drain*
European Version*
European Version
• Butt Weld (ISO, DIN)
• Ferrule (ISO, DIN)
• Flange (ISO, DIN)
• Ferrule (11¤2 in.)
U.S. Version
Japanese Version
• Butt Weld
• Ferrule/
Sanitary Flange
• Valve
• None
• Sanitary Flange (1 in. only)
• Ferrule (ISO 1.5S)
U.S. Version
• Sanitary Flange (11¤2 in.)
Gauge Port
Vent
Japanese Version
T-line Connection
• Ferrule (ISO 1S)
• Flange ( JIS 20A or 25A)
Inlet
Outlet
Drain
Series 3000 C-Line Single-Round Housings
C-line Connection
Inlet/Outlet
Gauge Port
Vent*
European Version*
European Version
• Butt Weld (ISO, DIN)
• Ferrule (ISO, DIN)
• Flange (ISO, DIN)
• Ferrule (11¤2 in.)
U.S. Version
Japanese Version
• Butt Weld
• Ferrule/
Sanitary Flange
• Valve
• None
• Butt Weld (1 in. or 11¤2 in.)
• Sanitary Flange
(1 in. or 11¤2 in.)
• Ferrule (ISO 1S)
Japanese Version
• Ferrule (ISO DN 8)
• Ferrule (ISO 1S or 1.5S)
• Flange ( JIS 20A or 40A)
U.S. Version
• Sanitary Flange (11¤2 in.)
Gauge Port
Vent
Drain
European Version
U.S. Version
• Sanitary Flange (1¤2 in.)
Japanese Version
• Ferrule (ISO 8A)
Inlet
Outlet
Drain
*Wide variety of options available. Please consult individual housing specification sheets for details; see back page for literature numbers.
2
Product Line Overview*
ASME Compliance
ASME compliant housings have been designed in accordance to the requirements of
ASME Section VIII Division 1.
CE Pressure Equipment
CE compliant housings have been designed and manufactured according to the
essential requirements of the European Pressure Equipment Directive 97/23/EC.
Series 3000 30-inch In-line, T-line, as well as 20-inch and 30-inch C-line housings
are CE marked.
CFR Compliance
The sealing materials supplied comply with the Title 21 Code of Federal Regulations,
section 177.2600 for rubber compounds or 177.1550 for fluorocarbon resin,
177.1520 for olefin polymers.
USP Class VI Compliance
All seal materials comply with USP <88> Biological Reactivity Tests
for Class IV plastics.
Operating Conditions
Range:
10 bar (145 psig) at 25 °C (77 °F)
7 bar (100 psig) at 60 °C (140 °F)
6 bar (87 psig) at 80 °C (176 °F)
3.2 bar (46 psig) at 145 °C (293 °F)
Materials of Construction (Wetted Parts)
All metal surfaces in
contact with the product:
Plunger valve seal tip:
Diaphragm valve membrane:
Gasket and plunger valve seal:
Optional gasket materials:
316L (DIN 1.4404 and DIN 1.4435) stainless steel
(Code 0 spring is 316 stainless steel)
PTFE (Teflon® polymer)
EPDM
Silicone
EPDM, PTFE (Teflon polymer encapsulated Viton® fluoroelastomer)
Surface Finish
Electropolished (EP):
All T-line and In-line housing stainless steel wetted parts are electropolished
Ra ≤ 0.5 µm internal, Ra ≤ 0.8 µm external.
C-line housing permeate side is Ra ≤ 0.5 µm.
Mechanical Polish (MP):
All T-line and In-line housing stainless steel wetted parts are mechanically polished
Ra ≤ 0.5 µm internal, Ra ≤ 0.8 µm external.
C-line housing permeate side is Ra ≤ 0.5 µm
Final Fill:
All T-line and In-line housing stainless steel wetted parts are electropolished
Ra ≤ 0.4 µm internal, Ra ≤ 0.8 µm external.
ASME:
All T-line and In-line housing stainless steel wetted parts are electropolished
Ra ≤ 0.5 µm internal, Ra ≤ 0.8 µm external.
Cartridge Code
Code 7, 0 and F (Housing type will determine cartridge code compatibility.)
Clamp
4 in. sanitary flange with:
• 3-piece 304 stainless steel clamp standard on non-ASME compliant housings
• 2-piece bolted 304 stainless steel clamp standard on ASME stamped housings
*Wide variety of options available. Please consult individual housing specification sheets for details; see back page for literature numbers.
3
Literature for Series 3000 Single-Round Housings
Data Sheet
Series 3000 Single-Round Housings
DS4112EN00
Specification Sheets
Version
Line Style
Literature No.
U.S. Version
T-line Housings
In-line Housings
C-line Housings
SP1002ENUS
SP1001ENUS
SP1000ENUS
European Version
T-line Housings
In-line Housings
C-line Housings
SP1020EN00
SP1040EN00
SP1030EN00
Japanese Version
T-line Housings
In-line Housings
C-line Housings
SP1050EN00
SP1060EN00
SP1070EN00
Discover the More in Millipore™
In every application, every step and every scale, count on Millipore to be
everywhere for you—from monoclonals to vaccines, from clinical through
pilot to full-scale manufacturing. Our technologies are used by most of the
world’s major biopharmaceutical companies. But we deliver more than
advanced separation, purification, sterilization and quality control products.
With Millipore, you get services to optimize and validate your processes,
comprehensive resources to streamline and enhance your operation,
unmatched know how forged from 50 years’ experience—
and solutions that integrate it all. For higher yields, improved process
economics and faster speed to market, discover the more in Millipore.
To Place an Order or Receive Technical Assistance
For additional information call your nearest Millipore office:
In the U.S. and Canada, call toll-free 1-800-MILLIPORE (1-800-645-5476)
In the U.S., Canada and Puerto Rico, fax orders to
1-800-MILLIFX (1-800-645-5439)
Outside of North America contact your local office.
To find the office nearest you visit www.millipore.com/offices.
Internet: www.millipore.com
Technical Service: www.millipore.com/techservice
Â
Millipore is a registered trademark of Millipore Corporation.
“Discover the More in Millipore” is a trademark of Millipore Corporation.
ISO is a registered trademark of the International Organization for Standardization.
Teflon is a registered trademark of E. I du Pont de Nemours and Company.
Viton is a registered trademark of DuPont Dow Elastomers, L.L.C.
Luer-Lok is a trademark of Becton Dickinson and Company.
Lit. No. DS4112EN00 Rev.- 7/04 Printed in U.S.A. 04-176
© 2004 Millipore Corporation, Billerica, MA 01821 U.S.A. All rights reserved.