TAIL ROTOR [H0324-S] Manual
Spare Parts
Tail Rotor Hub Assembly
H0325-S
HC153-S
HC335-S
H0327-S
HC411-S
HC435-S
HC096-S
HC004-S
HC330-S
HC349-S
Buttom Head Cap
Screw M4x6mm
(HC096-S)
Tail Rotor Shaft With Tail Hub Assembled x 1pc.
Cup Point Set Screws M4x6mm x 1pc.
Tail Hub Oring x 2pcs.
Aluminum Tail Grip x 2pcs.
Bearing Ø5xØ10x4mm x 4pcs.
Thrust Bearing Ø5xØ10x4mm x 2pcs.
Button Head Cap Screw M4x6mm x 2pcs.
Socket Head Cap Screw M2x6mm x 2pcs.
Spacer Ø5xØ9x0,75mm x 2pcs.
Spacer Ø7,5xØ10x0,5mm x 2pcs.
Spindle Shaft
(H0329-S)
Oring
(HC335-S)
Tail Shaft
(H0325-S)
Thrust Bearing
5x 10x4mm
(HC435-S)
Tail Blade Grip
(H0327-S)
Note: Smaller ID
Note: Larger ID
Note:
It is a normal for the tail to feel a bit tight after initial
assembly as the tail spindle preload is ussually high when
the helicopter is brand new. The preload will loosen up
after 2-5 flights allowing the system to become smooth.
Bearing 5x
(HC411-S)
Spacer 5x 9x0.75mm
(H0330-S)
Tail Rotor Hub Assembly
Bearing
5x 10x4mm
(HC411-S)
Spacer
7.5x 10x0.5mm
(H0349-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
10x4mm
Uniball M2.5x
(H0064-S)
5H6
Tail Pitch Slider Link Assembly
( Not included in H0324-S )
Spacer 5x
(H0330-S)
9x0.75mm
Tail Blade Grip
Assembly
Tail Pitch Slider Link Assembly
Note: S >> Left Side
Tail Pitch Slider
Assembly
Tail Pitch Slider Link
(H0261-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
Buttom Head Cap Screw M4x6mm
...x2
Socket Head Cap Screw M2x6mm
Spacer
2x 3x3mm
(H0076-S)
Note: S >> Right Side
Copyright@2013 - SAB Heli Division - All rights reserved
...x4