Dashboard Viewlets TVT Scenarios
Rational Team Concert (RTC)
Table of Contents
(1) Important Notes
(2) Viewlet Framework
(3) RTC Viewlets
(3.1) Build
(3.1.1) Builds
(3.1.2) Build Queue
(3.1.3) Build Status
(3.2) Feeds
(3.2.1) My Work Item Changes
(3.2.2) Project and Team Events
(3.3) Help
(3.3.1) Welcome to Rational Team Concert
(3.4) Project/Team
(3.4.1) Description
(3.4.2) Teams
(3.4.3) Team Members
(3.5) Reports
(3.5.1) Report
(3.6) Work Items
(3.6.1) Work Items
(3.6.2) Work Item Queries
(3.6.3) Work Item Statistics
1
(1) Important Notes



Open bugs against “Rational Team Concert” project area
o Work Item Category: “Dashboard Viewlets”
Any section of a screen shot that has a larger red “X” does not need to be translated
Generally, user-inputted information is not translated (e.g. names / descriptions)
2
(2) Viewlet Framework
1.
2.
3.
4.
5.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add any viewlet to the dashboard
Verify viewlet title
Verify tooltips for all controls in the viewlet title area (e.g. “Filter”, “Menu”, “Maximize”, “Close”, “Edit”)
6. Open the viewlet drop menu
7. Verify the menu contents
8. Select the “Appearance” menu entry
9. Verify the contents of the viewlet appearance area
10. Hover over each label and verify the contents of the hover pop-up produced
3
(3) RTC Viewlets
(3.1) Build
(3.1.1) Builds
1.
2.
3.
4.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Builds” viewlet to the dashboard
Verify the initial instruction message in the viewlet content area
5. Open the viewlet settings area
6. Verify the contents of the viewlet settings area
7. Hover over each label and verify the contents of the hover pop-up produced
8. Click the “Select…” button for the “Project” field
9. Verify the contents of the “Select Project Area” dialog
4
10. Click the “Select…” button for the “Build Definition” field
11. Verify the contents of the “Build Definitions” dialog
12. Select a build definition from the “Build Definitions” dialog that will produce build results.
13. Click “OK” to close the dialog
14. Click “OK” to close the viewlet settings area
15. Verify the contents of the viewlet content area
16. Hover over each icon in the viewlet content area and verify the contents of the hover tip produced
5
17. Hover each resource link in the viewlet content area and verify the contents of the hover pop-up
produced
18. Click the “Maximize” control in the viewlet title area to zoom the viewlet
19. Verify the contents of the maximized viewlet content area
6
7
(3.1.2) Build Queue
1.
2.
3.
4.
5.
6.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Build Queue” viewlet to the dashboard
Open the viewlet settings area
Verify the contents of the viewlet settings area
Hover over each label and verify the contents of the hover pop-up produced
7. Click the “Select…” button for the “Build Definitions” field
8. Verify the contents of the “Build Definitions” dialog
8
9. Select all build definitions in the “Select Parameters” dialog to produce build results.
10. Click “OK” to close the dialog
11. Click “OK” to close the viewlet settings area
12. Verify the contents of the viewlet content area
13. Hover over each icon in the viewlet content area and verify the contents of the hover tip produced
14. Hover over each progress bar widget in the viewlet content area and verify the contents of the hover
tip produced
15. Hover each resource link in the viewlet content area and verify the contents of the hover pop-up
produced
9
16. Click the “Maximize” control in the viewlet title area to zoom the viewlet
17. Verify the contents of the maximized viewlet content area
10
(3.1.3) Build Status
1.
2.
3.
4.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Build Status” viewlet to the dashboard
Verify the initial instruction message in the viewlet content area
5. Open the viewlet settings area
6. Verify the contents of the viewlet settings area
7. Hover over each label and verify the contents of the hover pop-up produced
8. Click the “Select…” button for the “Build Definitions” field
9. Select all build definitions in the “Select Parameters” dialog to produce build results.
10. Click “OK” to close the dialog
11. Click “OK” to close the viewlet settings area
12. Verify the contents of the viewlet content area (NO STRINGS TO VERIFY)
11
12
(3.2) Feeds
(3.2.1) My Work Item Changes
1.
2.
3.
4.
5.
6.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “My Work Item Changes” viewlet to the dashboard
Open the viewlet settings area
Verify the contents of the viewlet settings area
Hover over each label and verify the contents of the hover pop-up produced
7. Click “OK” to close the viewlet settings area
8. Verify the contents of the viewlet content area
9. Hover over each feed entry link in the viewlet content area and verify the contents of the hover popup produced
13
10. Click the “Maximize” control in the viewlet title area to zoom the viewlet
11. Verify the contents of the maximized viewlet content area
14
15
(3.2.2) Project and Team Events
1.
2.
3.
4.
5.
6.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Project and Team Events” viewlet to the dashboard
Open the viewlet settings area
Verify the contents of the viewlet settings area
Hover over each label and verify the contents of the hover pop-up produced
7. Click the “Select…” button for the “Project/Team” field
8. Verify the contents of the “Select Project or Team Area” dialog
16
9. Click the “Select…” button for the “Types to show” field
10. Verify the contents of the “Select Parameters” dialog
11. Click “OK” to close the viewlet settings area
12. Verify the contents of the viewlet content area
13. Hover over each feed entry link in the viewlet content area and verify the contents of the hover popup produced
17
14. Click the “Maximize” control in the viewlet title area to zoom the viewlet
15. Verify the contents of the maximized viewlet content area
18
(3.3) Help
(3.3.1) Welcome to Rational Team Concert
1.
2.
3.
4.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Welcome to Rational Team Concert” viewlet to the dashboard
Verify the contents of the viewlet content area
19
(3.4) Project/Team
(3.4.1) Description
1.
2.
3.
4.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Description” viewlet to the dashboard
Verify the contents of the viewlet content area (NO STRINGS TO VERIFY)
20
(3.4.2) Teams
1.
2.
3.
4.
5.
6.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Teams” viewlet to the dashboard
Open the viewlet settings area
Verify the contents of the viewlet settings area
Hover over each label and verify the contents of the hover pop-up produced
7. Click “OK” to close the viewlet settings area
8. Verify the contents of the viewlet content area (NO STRINGS TO VERIFY)
21
9. Hover over each resource link in the viewlet content area and verify the contents of the hover pop-up
produced
22
(3.4.3) Team Members
1.
2.
3.
4.
5.
6.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Team Members” viewlet to the dashboard
Open the viewlet settings area
Verify the contents of the viewlet settings area
Hover over each label and verify the contents of the hover pop-up produced
7. Click “OK” to close the viewlet settings area
8. Verify the contents of the viewlet content area (NO STRINGS TO VERIFY)
9. Hover over each user resource link in the viewlet content area and verify the contents of the hover
pop-up produced
23
10. Hover over each process role in the viewlet content area and verify the contents of the hover pop-up
produced
11. Click the “Maximize” control in the viewlet title area to zoom the viewlet
12. Verify the contents of the maximized viewlet content area
24
25
(3.5) Reports
(3.5.1) Report
13. Go to a CCM project area or team area dashboard.
14. Open the “Widget Catalog”
15. Add the “Report” viewlet to the dashboard
16. Verify the initial instruction message in the viewlet content area
17. Open the viewlet settings area
18. Verify the contents of the viewlet settings area
19. Hover over each label and verify the contents of the hover pop-up produced
20. Open the drop-down list for the “Report” field and verify the contents
26
21. Select a report resource in the “Report” field
22. Click the “Select…” button for the “Query” field
23. Verify the contents of the “Parameters” dialog
24. Hover over each control within the styled box (e.g. “Select All”, “Desselect All”, “Add more values”)
and verify the contents of the hover tip produced
25. Repeat Step #9 for different report resources
27
28
26. Select parameter values that will produce report results
27. Click the “Preview” button
28. Verify the contents of the report results preview area
29
29. Click the “OK” button to close the dialog
30. Click the “OK” button to close the viewlet settings area
31. Verify the contents of the viewlet content area
30
32. Click on the “Show Parameters” hyperlink
33. Verify the contents of the report parameters section
34. Click the “Maximize” control in the viewlet title area to zoom the viewlet
35. Verify the contents of the maximized viewlet content area
31
32
(3.6) Work Items
(3.6.1) Work Items
1.
2.
3.
4.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Work Item” viewlet to the dashboard
Verify the initial instruction message in the viewlet content area
5. Open the viewlet settings area
6. Verify the contents of the viewlet settings area
7. Hover over each label and verify the contents of the hover pop-up produced
8. Click the “Select…” button for the “Query” field
9. Verify the contents of the “Work Item Queries” dialog
33
10. Select a work item query in the “Work Item Queries” dialog
11. Click the “Finish” button to close the dialog (Skip to Step #16 if not testing conditional queries)
12. [Optional] Click the “Select…” button for the “Query” field
13. [Optional] Select a conditional (parameterized) work item query in the “Work Item Queries” dialog
(Note: Conditional queries need to be created ahead of time within the Work Items Web UI or Rich
Client)
34
14. [Optional] Click the “Next >” button (Note: The number of steps depends on the number of work item
attributes marked as conditional (or parameterized) in the work item query
35
36
37
15. [Optional] Click the “Finish” button to close the dialog
16. Click the “Select…” button for the “Additional icons” field
17. Verify the contents of the “Select Additional Icons” dialog
18. Select some additional work item attributes (e.g. “Severity”, “Priority”, “Status”, “Resolution”)
19. Click the “OK” button to close the dialog
20. Click “OK” to close the viewlet settings area
21. Verify the contents of the viewlet content area
22. Hover over each icon in the viewlet content area and verify the contents of the hover tip produced
38
23. Hover over each user resource link in the viewlet content area and verify the contents of the hover
pop-up produced
39
24. Click the “Maximize” control in the viewlet title area to zoom the viewlet
25. Verify the contents of the maximized viewlet content area
40
41
(3.6.2) Work Item Queries
1.
2.
3.
4.
5.
6.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Work Item Queries” viewlet to the dashboard
Open the viewlet settings area
Verify the contents of the viewlet settings area
Hover over each label and verify the contents of the hover pop-up produced
7. Click “OK” to close the viewlet settings area
8. Verify the contents of the viewlet content area
42
9. Hover over each user work item link in the viewlet content area and verify the contents of the hover
pop-up produced
43
(3.6.3) Work Item Statistics
1.
2.
3.
4.
Go to a CCM project area or team area dashboard.
Open the “Widget Catalog”
Add the “Work Item Statistics” viewlet to the dashboard
Verify the initial instruction message in the viewlet content area
5. Open the viewlet settings area
6. Verify the contents of the viewlet settings area
7. Hover over each label and verify the contents of the hover pop-up produced
8. Open the drop-down list for the “Presentation” field and verify the contents
9. Click the “Select…” button for the “Query” field
10. Select a work item query that will produce work item results
11. Click the “Finish” button to close the dialog
44
12. Open the drop-down list for the “Parameter” field and verify the contents
13. Select a grouping parameter (e.g. “Severity”, “Priority”, “Type”, “Status”, etc.)
14. Click the “Select…” button for the “Colour Palette” field
15. Verify the contents of the “Colour Palette” dialog
16. Click the “Cancel” button to close the dialog
17. Click the “Select…” button for the “Group Filters” field
18. Verify the contents of the “Group Filters” dialog
45
19. Click the “Cancel” button to close the dialog
20. Click “OK” to close the viewlet settings area
21. Verify the contents of the viewlet content area
22. Hover over each chart shape in the viewlet content area and verify the contents of the hover tip
produced
23. Click the “Maximize” control in the viewlet title area to zoom the viewlet
24. Verify the contents of the maximized viewlet content area
46
25. Open the viewlet settings area
26. Select the “Table” value from the “Presentation” field drop-down list
27. Click “OK” to close the viewlet settings area
28. Verify the contents of the viewlet content area
29. Open the viewlet settings area
30. Select the “Created By” value from the “Parameter” field drop-down list (or some other grouping
parameter that will create a large number of results)
31. Click “OK” to close the viewlet settings area
32. Verify the contents of the viewlet content area
33. Click on the “Other” hyperlink in the viewlet content area
34. Verify the contents of the “Select Parameter Name” dialog
47
35. Click the “Cancel” button to close the dialog
36. Open the viewlet settings area
37. Select the “Tag Cloud” value from the “Presentation” field drop-down
38. Select the “Tags” value from the “Parameter” field drop-down list
39. Click “OK” to close the viewlet settings area
40. Verify the contents of the viewlet content area
FIN
48