ONLINE AUCTION
MEBA METALLBAU AG (i.L.) (CH)
Press brakes and metalworking machines
Industrie Neuhof 1 ­ 3422 Kirchberg
(Meba Metallbau AG (i.L.))
Closing date: Tuesday 05 SEPTEMBER starting 14:00
Bidding only on the internet!
11­07­17 12.10
www.TroostwijkAuctions.com
Tuesday 05 September 2017 MEBA METALLBAU AG (i.L.)
Special Condition
Closing date
Viewing
Tuesday 5 September 2017 starting 14:00 CET
Tuesday 29 August from 09:00 until 16:00 CET
Meba Metallbau AG (i.L.)
Industrie Neuhof 1
3422 Kirchberg, Switzerland
Lot 2000­2001 by appointment
Dorf 7
6212 Kaltbach, Schweiz
Viewing Instructions
Company organising this Online
Auction
Markup
VAT
Collection
Lot 2002­2003 by appointment
Oberdorf 1
5040 Schöftland, Schweiz
Please note that this concerns an ascending auction sale, preceded by a viewing
day. Placing a bid without viewing the equipment is at one’s own risk. Please see
articles 3 and 6 of the General Conditions.
TROOSTWIJK AG
Kernenriedstrasse 1
CH­3421 LYSSACH, Switzerland
Phone: +41 34 411 31 80
Fax: +41 34 411 31 89
E­mail: [email protected]
18.00%
8.00%
Wednesday 13 September from 09:00 until 16:00 CET
Thursday 14 September from 09:00 until 16:00 CET
Meba Metallbau AG (i.L.)
Industrie Neuhof 1
3422 Kirchberg, Switzerland
Lot 2000­2001 by appointment
Dorf 7
6212 Kaltbach, Schweiz
Collection details
Information VAT
Lot 2002­2003 by appointment
Oberdorf 1
5040 Schöftland, Schweiz
The buyer is fully responsible for the dismantling, loading and transportation of the
bought lots. Troostwijk AG cannot accept any responsibility unless indicated
otherwise. The collection/pick­up will only take place on the mentioned delivery
date/time and address. If the collection of the goods happens later, the customer is
responsible for the costs (hire, extra costs)
Here you can apply for an allowance of short­term work in Switzerland:
https://www.sem.admin.ch/sem/en/home/themen/fza_schweiz­eu­
efta/meldeverfahren.html
8% over the highest bid including Premium.
Foreign buyers, i.e. buyers not being based in Switzerland, have to pay the legal
www.TroostwijkAuctions.com
Swiss VAT as deposit to the auctioneer. After reception of the original, valid
exportation documents, which are properly stamped to prove that the export is
carried out, the auctioneer will refund the Swiss VAT paid as deposit.
Payments have to be effected to Troostwijk AG, Zürich
Payment
Troostwijk account for CHF: UBS, CH­8098 Zürich, Account number 230­
642.916.01W, Clearing number 230, Swift Code: UBSWCHZH80A, IBAN: CH30
0023 0230 6429 1601 W
Prolongation
Combination
Terms and Conditions of Sale
Contact
Troostwijk account for Euros: UBS, CH­8098 Zürich, Account number 230­
642.916.60Y, Clearing number 230, Swift Code: UBSWCHZH80A, IBAN: CH47
0023 0230 6429 1660Y
If a bid is made in the last 5 minutes before the lot closes, the closing time of that lot
will be extended with 5 minutes until no bids are made.
All lots in a combination will be sold individually first. After the last lot is sold, the total
of bids is raised 5%. This is the starting bid of the combination. If the combination is
sold it overrules the individual bids, if not the individual bids are applicable.
On the auction the general terms and conditions of the online auction are applicable
concerning the (possible) purchase of moveable assets, furthermore these specific
terms and conditions.
E­Mai: [email protected] Tel.: +41 34 411 31 80
www.TroostwijkAuctions.com
Lot
Number Description
Starting Bid
Plate shear and replacement knives
Lot 4, 533
1
2
3
1 Heavy­duty punching machine
Trumpf, Trumatic 5000 R, year built 2005, serial number A0060A0403, Heavy­duty
punching machine, for plate processing, plate thickness up to 8 mm, up to 1200
strokes/min. max. cutting force 220 kN, voltage 400 V / 50 Hz, connection capacity 29
kVA, air connection 7­14 bar, space required approx. 13500x6500 mm, for further
technical details see pictures, including various punching tools and belongings in 2
drawer cabinets, tool skiving machine "Trumpf quicksharp" and "Trumpf multiset itm"
1 press brake
Weinbrenner, GP 400, year built 1995, serial number 1408, press brake, processing
length 6000 mm, pressing force 4000 kN, slide stroke 520 mm, hydraulic pressure 285
bar, stop time 140 ms, security distance 224 mm, 44351.53 working hours, control
replaced 10.04.2015, "Cybelec SA type S­PAD­880S/A", with replacement release,
weight 40000 kg
1 Lot with trimming tools
Lot with trimming tools, various sizes and forms, on 3 transport trollies, with barriers and
trollies
25,000.00
17,500.00
2,000.00
Press brake 1 with tools
Lot 2 ­ 3
4
5
1 press brake
Weinbrenner, GP 250 / 4050, year built 1983, serial number 948 G, press brake,
processing length 4050 mm, pressing force 2500 kN, slide stroke 324 mm, hydraulic
pressure 280 bar, stop time 118 ms, security distance 190 mm, 5814.7 working hours,
weight 24000 kg
1 Lot with trimming tools
Lot with trimming tools, various sizes and forms, on 2 transport trollies, with trollies
14,000.00
150.00
Press brake 2 with tools
Lot 4 ­ 5
6
7
8
9
10
1 press brake
Weinbrenner, GP 63 LC, year built 1994, serial number 1374 G, press brake,
processing length 2050 mm, pressing force 630 kN, slide stroke 240 mm, hydraulic
pressure 303 bar, stop time 110 ms, security distance 176 mm, 21214.97 working
hours, weight 6100 kg, with various trimming tools
1 Plate shear
Beyeler, C 6200x10, year built 1995, serial number 95'3362, Plate shear, with swing
cutt, length of knives 6200 mm, max. plate thickness steel 45 daN/mm2 10 mm,
stainless 70 daN/mm2 8 mm, stroke of standard backgauge 1100 mm, weight 31000 kg,
complete length 7300 mm, complete width with standard gauge 2370 mm, complete
height 2400 mm, for further technical details see pictures
1 Plate shear
Durma, SB 3013 NT, year built 2008, serial number 6088085128, Plate shear, cutting
length 3100 mm, max. material thickness 13 mm, stroke 130 mm, stroke number per
minute 10, dimension approx. 4250x3850x2200 mm, weight 12300 kg
1 Big lot with plate storage
Big lot with plate storage, various compositions and sizes of plates, with storage rack,
various location in the workshop, see pdf sheet
1 Fork lift
EP, CPCD 100.RW28, year built 2012, serial number GR1002111259837, Fork lift, with
official approval for road service, lifting force 10 tons, lifting height 3600 mm, beam
height approx. 3150 mm, net weight 13800 kg, diesel, cubic capacity 4500 cm3,
capactiy 110.00 kW, first registration 17.08.2012, approx. 533 working hours, with
service book and registration document
3,000.00
7,500.00
4,500.00
4,000.00
9,500.00
Lot
Number Description
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Starting Bid
1 Fork lift
Mitsubishi, FG15, serial number F25A­53069, Fork lift, lifting force 1500 kg, lifting height
3000 mm, weight 2530 kg, vehicle height approx. 2060 mm, 6535 working hours,
gasoline
1 Pedestrian stacker
Jungheinrich, EJC 12G­115­320ZT (K), year built 1998, serial number 80829318,
Pedestrian stacker, lifting force 1200 kg, lifting height 3300 mm, beam height approx.
2050 mm, approx. 2670 working hours, collection later on by appointment with
Troostwijk AG
1 Plate notching machine
Boschert, K 30­120/K90, year built 1984, serial number 48, Plate notching machine
1 Punching machine
Trumpf, Minipress 25/KST 25/300, year built 1985, serial number 189, Punching
machine, cutting force 250 kN (25 Mp), material thickness max. 10 mm, with drawer
cabinet, with punching tools
1 Straightening press
Walter Auer, CH­20 To, serial number 215, Straightening press, hydraulic, force 20 tons
1 Punching machine
Mubea, BFL 350, serial number 05004 81 717 407, Punching machine
1 Punching machine
Mubea, KL 350, year built 1999, serial number 99124, Punching machine, F max. 350
kN
1 Lathe
AFM, TUG­40 x 1500, year built 1981, serial number 3961, Lathe, center width 1500
mm, center over bed approx. 205 mm, speed 18­1600 rpm, incl. Jaw chuck and various
belongings
1 Circular metal saw
Kaltenbach, KKS 450 E, year built 1999, serial number 120903, Circular metal saw,
cutting angle 0­90, saw blade diameter approx. 450 mm, with 2 material runways
1 Gear­column drilling machine
Bernardo, GB 32 S, year built 2006, serial number 602003, Gear­column drilling
machine, with thread cutting and milling function, weight 310 kg
1 Mounting table
Mounting table, vertical tiltable, dismantled, dimension approx. 2500x1800x900 mm
1 Working table
Working table, dimension approx. 2010x1600x800 mm
1 Welding machine
Esab, Mig L 405w, serial number 628­929­5897, Welding machine
1 Welding machine
Esab, Mig 400tw, serial number 627­719­3398, Welding machine
1 Welding machine
Esab, Tig 2200i AC/DC, serial number 627­719­3398, Welding machine
1 Welding machine
Kemppi, Pro 3200, serial number N11808, Welding machine
1 Welding machine
ISO­Tec, UR 1000, serial number 64014, Welding machine
1 Welding machine
Nitty­Gritty, CLINOX.pro, Welding machine
1 Stud welding device
Welko, CDS 700, serial number 310385, Stud welding device
1 Welding machine
Esab, DTB250 AC­DC, serial number 548­738­8802, Welding machine
2 Gas welding trollies
Gas welding trollis, various hoses, various burners
1,500.00
1,200.00
900.00
800.00
600.00
500.00
500.00
1,250.00
1,100.00
450.00
80.00
50.00
400.00
400.00
100.00
400.00
400.00
100.00
150.00
400.00
60.00
Lot
Number Description
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
1 Smoke outlet
Nedermann, FilterCart, Smoke outlet
3 Welding masks
Esab, Welding masks
2 Welding masks
Esab, Welding masks
3 Welding shields
Welding shields
4 Welding hoses
Welding hoses
1 Welding hose Welding hose, as new
1 Lot with welding electrodes
Lot with welding electrodes
1 Lot with welding wire
Lot with welding wire, +/­ 24 rolls
10 Assortment cases
Assortment cases, without content
2 Assortment cases
Assortment cases, with content, drills
3 Angle bench vices
Angle bench vices
1 Double drill head
Sigloch & Schrieder, V 602, serial number 31054, Double drill head, with case
1 Flat suction pump
Tool­air, PFI­8400 A, Flat suction pump
1 Lot with socket wrench set
Lot with socket wrench set, 2 pcs. not complete
1 Compressor
Erba, V­210/8, year built 2011, Compressor, pressure 8 bar
3 Cable rolls
Cable rolls, 400 V
4 Cable rolls
Cable rolls
1 Drawer cabinet
Videmar, Drawer cabinet, with 9 drawers, with content
1 Drawer cabinet
Videmar, Drawer cabinet, with 9 drawers, with content
1 Lot with saw blades
Lot with saw blades, various diameters, +/­ 10 pcs.
1 Straightening press
Straightening press
1 Trestle
Trestle
1 Aluminium container with cover
Aluminium container with cover
1 Metal cabinet
Metal cabinet, dimension approx. 920x420x1950 mm, with content
1 Metal cabinet
Metal cabinet, dimension approx. 920x420x1950 mm, with content
1 Rack
Rack
Starting Bid
100.00
40.00
30.00
10.00
30.00
20.00
30.00
150.00
60.00
20.00
30.00
30.00
30.00
30.00
60.00
30.00
30.00
60.00
120.00
40.00
30.00
40.00
20.00
60.00
60.00
10.00
Lot
Number Description
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
Starting Bid
1 Tool wall
Tool wall, dimension approx. 2850x1370 mm, with pliers, shackles and angles
2 Mounting supports
Mounting supports
1 Tool trolley
Gedore, Tool trolley, with 7 drawers, with content
1 Tool trolley
Gedore, Tool trolley, with 3 drawers, with content
1 Tool trolley
Gedore, Tool trolley, with 5 drawers, with content
1 Tool trolley
Gedore, Tool trolley, with 5 drawers, with content
1 Tool trolley
Gedore, Tool trolley, with 5 drawers, with content
1 Tool trolley
Gedore, Tool trolley, with 6 drawers, with content
1 Split conus
Split conus
1 Deburrer
Deburrer
4 Material roll belt
Material roll belt, 2x dimension approx. 4850x470 mm, 2x dimension approx. 2100x580
mm, dismantled
1 Device (Isoboy)
M­90­R, Device (Isoboy), for cutting isolations, with unwinder
1 Holder
Holder
1 Spring scale
Pesola, Spring scale, up to 20 kg
3 Vacuum lifter
Powr­Grip, Vacuum lifter, with case
1 Compasses for plasma cutter
Compasses for plasma cutter, with case
1 Lot with manometers
Lot with manometers, +/­ 7 pcs.
2 Leather skirts
Leather skirts
1 Hydraulic lifter
Magnus, CPI­10, Hydraulic lifter, pressure 700 bar, with belongings, in 2 metal cases
2 Hydraulic lifters
Hydraulic lifters, lifting foce 2600 kg / 5000 kg
2 Hydraulic lifters
Hydraulic lifters, lifting foce 2000 kg / 5000 kg
1 Lot with hard­soldering wire
Lot with hard­soldering wire
1 Plate puncher
Alfra, Plate puncher
1 Generator
AVR 3, 6,5 HP, Generator, gasoline motor
1 Lot with cleaning fibres
Lot with cleaning fibres
3 Construction site helmets
Construction site helmets, as new
20.00
20.00
80.00
40.00
80.00
80.00
80.00
80.00
40.00
20.00
100.00
40.00
10.00
20.00
20.00
10.00
30.00
10.00
70.00
20.00
20.00
30.00
10.00
120.00
10.00
10.00
Lot
Number Description
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
Starting Bid
1 Telescope leveling rule
Messfix, Telescope leveling rule
3 Leveling rules
Leveling rules
1 Lot with clamping set
Lot with clamping set, in 2 boxes
4 Trollies
Trollies
1 Fan
Rotel, Fan
1 Metal cabinet
Metal cabinet, dimension approx. 950x420x1950 mm, with content, silicon, adhesive,
etc.
1 Metal cabinet
Metal cabinet, dimension approx. 950x420x1950 mm, with content, seal tape, adhesive
belts, etc.
1 Metal cabinet
Metal cabinet, dimension approx. 950x420x1950 mm, with content, grinding material
1 Metal cabinet
Metal cabinet, dimension approx. 920x420x1950 mm, with content, grinding material
1 Metal cabinet
Metal cabinet, dimension approx. 920x420x1950 mm, with content, grinding material
1 Magnetic drilling machine
Fein / Walter Schweizer, MBS­2, Magnetic drilling machine
1 Sliding door cabinet
Sliding door cabinet, dimension approx. 1600x400x1120 mm, with content, protection
cloves, vests, polishing liquids, etc.
3 Levels
Levels, various length
1 Arko­transformer
Arglo, A 50/6, Arko­transformer
24 Neon lamps
Osram, L 36W/840, Neon lamps, length approx. 1200 mm, 2 pcs. approx. 1500 mm
1 Metal table
Metal table, dimension approx. 2250x785x780 mm
4 Cones
Cones
1 Saw blade
Saw blade, diameter approx. 400 mm
1 Lot with hand tools
Lot with hand tools
1 High­pressure cleaner
Comet, Vento 150 Classic, serial number 35876982, High pressure cleaner, 2700 Watt,
140 bar
1 Telescope leveling rule
Metrauer, Telescopic, Telescope leveling rule, length 5 m
1 Surveyor's level
Geo­Master, GM24, Surveyor's level, with case and stand
1 Surveyor's level
Theis, AN24, Surveyor's level, with case and stand
1 Surveyor's level
Geo­Laser, AN­25, Surveyor's level, with case and stand
20.00
30.00
30.00
20.00
20.00
60.00
60.00
80.00
80.00
60.00
100.00
30.00
20.00
30.00
20.00
30.00
10.00
10.00
20.00
100.00
20.00
30.00
30.00
30.00
Lot
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
Number Description
Starting Bid
1 Lot with stands leveling rules
Lot with stand leveling rules, 2 stands, leveling rules
1 Grinding machine
Hitachi, Grinding machine
1 Screwing machine
Fein, Screwing machine
1 Jigsaw
Jigsaw
1 Drill hammer
Bosch, Drill hammer
1 Drill hammer
Metabo, Drill hammer
1 Hot air blower
Steinel, HL 1800 E, Hot air blower
1 Heavy­load rack
Heavy­load rack, dimension approx. 3100x600x1130 mm
1 Lot with containers
Lot with containers, aluminium, plastic
1 Anvil
Anvil, with wooden base and trolley
1 Roller storage rack
Lista, Roller storage rack, 3 roll elements, dimension approx. 6500x300x2200 mm
1 Lot with screw storage
Lot with screw storage, alls screws and dowels out of lot 118 and 140, with containers,
hinges, etc.
1 Lot with rolls
Lot with rolls
1 Lot with colours
Lot with colours
1 Lot with sealing material
Gyso, Lot with sealing material, belts, films
1 Plastic underlay plates Plastic underlay plates
1 Lot with containers aluminium/plastic
Lot with containers aluminium/plastic
3 Cable rolls
Cable rolls
2 Cable rolls
Cable rolls, 400 V
2 Cable pulls
Cable pulls
1 Chain hoist
Kito, Chain hoist, lifting force 750 kg
1 Chain hoist
Kito, Chain hoist, lifting force 2000 kg
1 Chain hoist
Chain hoist, lifting force 1000 kg
1 Chain hoist
Victory, Chain hoist, lifting force 1000 kg
1 Cable crane
ProMac, 991 G, year built 2010, serial number 103511, Cable crane, lifting force 500 kg
10.00
20.00
30.00
20.00
20.00
20.00
20.00
30.00
10.00
50.00
150.00
100.00
40.00
10.00
20.00
10.00
20.00
30.00
30.00
20.00
20.00
40.00
30.00
30.00
50.00
Lot
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
Number Description
Starting Bid
1 Cable crane
Arwin, HGS­B 125/250, year built 2010, serial number 103511, Cable crane, lifting force
125 kg
1 Chain hoist
Meili, SHO10L, serial number 64SY1863/00013508, Chain hoist, lifting force 1000 kg
1 Cable crane
Hadef, Liftboy Fig. 43/86, year built 2006, Cable crane, lifting force 125 kg
1 Cable crane
ProMac, Cable crane, lifting force 200 kg
1 Vacuum lifter
Piab, M125, Vacuum lifter
1 Cable pull Habegger, T15, Cable pull, lifting force 1500 kg
1 Lifting device
Jack, Hi­Lift, Lifting device
2 Storage racks
Storage racks, dimension approx. 3040x1000x2500 mm
1 Drawer cabinet
Drawer cabinet, with 10 drawers, with content
1 Cutting stands for sealings
Jansen, Cutting stands for sealings, with various belongings
1 Mounting rods
Mounting rods, length approx. 1650 mm, extendible
1 Lot with security harnesses
Miller, Lot with security harnesses
1 Lot with sealing scissors
Lot with sealing scissors, 4 pcs.
6 Clamping pliers
Clamping pliers
1 Lot with thread rods
Lot with thread rods, with holder
1 Lot with Raico mounting material
Lot with Raico mounting material
1 Guide pulley
Guide pulley, with various hemp ropes
1 Lot with conveyor rolls
Lot with conveyor rolls, 17 pcs.
1 Lot with hydraulic lifters
Lot with hydraulic lifters, 6 pcs., with content of box
1 Lot with aluminium containers
Lot with aluminium containers
1 Lot with grease
Blaser, Blasolube, Lot with grease, water resistable
1 Lot with snow chaines
Lot with snow chaines, 2 pair
4 Vacuum glas lifter
Vacuum glas lifter
1 Lot with mounting material
Lot with mounting material, content of a rack
1 Lot with cables
Lot with cables, plugs, bins, etc.
1 Lot with compressed air hoses
Lot with compressed air hoses
50.00
150.00
50.00
40.00
40.00
50.00
30.00
150.00
100.00
20.00
20.00
40.00
20.00
20.00
3.00
20.00
10.00
30.00
40.00
20.00
10.00
10.00
20.00
10.00
30.00
20.00
Lot
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
Number Description
Starting Bid
1 Lot with mounting material
Lot with mounting material, content of a rack
1 Starter cable
Starter cable
2 Assortment boxes
Assortment boxes, with 7 drawers each, with content
1 Lot with wire rops
Lot with wire rops, with various diameters
1 Lot with halogen lamps
Lot with halogen lamps, 5 pcs.
1 Welding hose
Welding hose
1 Wardrobe
Wardrobe, 2 doors, with bench
1 Lot with wardrobes
Lista, Lot with wardrobes, 3 pcs., 2x 3 doors, 1x 4 doors
1 Small cabinet
Small cabinet
1 Lot with bricklayers material
Lot with bricklayers material, trowels, containers, mortar, hand tools, 6 saws, 5 sledge
hammers, etc.
1 Magnetic wall
Magnetic wall, dimension approx. 1740x1000 mm
1 Web Web
2 Industrial vacuum cleaner
Wap, Aero 840 A, Industrial vacuum cleaner
2 Industrial vacuum cleaner
Kärcher, WD 2.200, Industrial vacuum cleaner
1 Vacuum cleaner
Soteco, Fox, Vacuum cleaner
1 Spraying device
Wagner, Fine Coat 9800, Spraying device, with hose
1 Mitre saw
Metabo, KGS 305, year built 2007, Mitre saw, saw blade diameter 305 mm, with trolley
1 Mitre saw
Elu, PS 174, serial number 7482, Mitre saw, saw blade diameter 216 mm
1 Hand mill
Makita, 5703 R, Hand mill, blade diameter 190 mm
1 Grinding machine
Metabo, 4350 Turbo Tec, Grinding machine
1 Grinding machine
Bosch, GSS 230 AE, Grinding machine
1 Belt grinding machine
Bosch, GBS 75 AE, Belt grinding machine, belt width approx. 75 mm
1 Belt grinding machine
Suhner, UTG 9­R, Belt grinding machine, belt width approx. 30 mm
1 Grinding machine
Suhner, Grinding machine, grinding width approx. 100 mm
1 Motor saw
Einhell, RG­EC 2240, Motor saw, electric, sword length 375 mm
2 Angle grinders
Angle grinders
10.00
10.00
40.00
20.00
20.00
20.00
20.00
60.00
10.00
30.00
10.00
10.00
30.00
30.00
30.00
40.00
70.00
40.00
30.00
20.00
20.00
30.00
30.00
30.00
30.00
30.00
Lot
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
Number Description
Starting Bid
2 Angle grinders
Angle grinders
2 Angle grinders
Metabo, Angle grinders
1 Drilling machine
Bosch, GGW 10 E, Drilling machine
1 Drilling machine
Bosch, GGW 10 E, Drilling machine
1 Drilling machine
Fein, ASge 636, Drilling machine
1 Impact drill
Metabo, Impact drill
1 Drilling machine
Fein, ASge 636, Drilling machine
1 Angle drilling machine
Hitachi, Angle drilling machine
1 Milling machine
Bosch, Milling machine
1 Double grinding machine
Vitax, V1, Double grinding machine, grin ding disc diameter approx. 160 mm, with wire
brush
1 Cordless riveter
Emhart, PB2500, Cordless riveter, 1 battery, charger and case
1 Cordless angle drilling machines
Makita, Cordless angle drilling machine, 2 batteries, charger and case
1 Cordless screwer
Milwaukee, M18 BDD, Cordless screwer, 2 batteries, charger and case
1 Cordless screwer
Milwaukee, C14 DD, Cordless screwer, 1 battery, charger and case
1 Cordless screwer
Milwaukee, C14 DD, Cordless screwer, 2 batteries, charger and case
2 Cordless riveter
Gesipa, AccuBird, Cordless riveter, 3 batteries, charger and case
1 Cordless riveter
Gesipa, AccuBird, Cordless riveter, 2 batteries, charger and case
1 Compressed air riveter
Gesipa, Taurus 3, Compressed air riveter
1 Compressed air riveter
Far, RAC 170, Compressed air riveter
1 Compressed air riveter
Lobster, AR­0ll­H, Compressed air riveter
1 Compressed air riveter
Lobster, AR­0ll­H, Compressed air riveter
1 Lot with compressed air tools
Lot with compressed air tools, 9 pcs.
1 Compressed air screwer
Compressed air screwer, with case
1 Compressed air grinder
Bosch, Compressed air grinder
2 Compressed air cartridge presses
Compressed air cartridge presses
2 Compressed air cartridge presses
Compressed air cartridge presses
30.00
30.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
40.00
40.00
40.00
30.00
30.00
30.00
40.00
30.00
20.00
20.00
20.00
20.00
30.00
30.00
20.00
20.00
10.00
Lot
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
Number Description
1 Compressed air miller
Compressed air miller, with pressure display and case
1 Lot with compressed air hoses
Lot with compressed air hoses
1 Compressed air spraying gun
Compressed air spraying gun
1 Angle grinder Metabo, Angle grinder
1 Grinding machine
Bosch, GEX 150 Turbo Professional, Grinding machine, with case
1 Impact drill
Metabo, SBE 705, Impact drill, with case
1 Drilling machine
Fein, ASe 636, Drilling machine, with "Jansen" fitting drill guide and case
1 Plate scissors
Dräco, S1001N­1, Plate scissors, with case
1 Water infeed device
Hilti, Water infeed device
1 Drill hammer
Hilti, TE­6­S, Drill hammer, with 3 chucks and case
2 Double cartridge presses
Hilti, MD2000, Double cartridge presses, with 1 case
2 Double cartridge presses
Hilti, MD2000, Double cartridge presses, with 1 case
1 Lot with screen cases
Hilti, Lot with screen cases, various sizes
1 Lot with core drills
Hilti, Lot with core drills, 29 pcs., various sizes
1 Battery charger
Einhell, Batteriemaster, Battery charger, 12 V, with starter cable
1 Guide rails for milling
Bosch, FSN 1600, Guide rails for milling, with bag
2 Thread cutting devices
Tapmatic, Thread cutting devices
1 Gas heater
Gas heater, with 2 gas burners
1 Cutting press
Jossi, Cutting press
1 Lifting clamp
Lifting clamp
1 Lifting clamp
Renfroe, Lifting clamp, grip range 5­35 mm, capacity 3000 kg
1 Binding device
Binding device, with trolley
1 Cable roll Cable roll
1 Electrode welding machine
Weider, Electrode welding machine
1 Electrode welding machine
Oerlikon­Bührle, RED 181, Electrode welding machine
1 Electrode welding machine
Kemppi, Minarc 150, Electrode welding machine
Starting Bid
10.00
20.00
10.00
10.00
30.00
30.00
40.00
30.00
10.00
50.00
20.00
20.00
20.00
50.00
20.00
20.00
50.00
20.00
50.00
10.00
60.00
20.00
10.00
40.00
40.00
80.00
Lot
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
Number Description
Starting Bid
1 Column drilling machine
Abarboga Maskiner, EB 825, Column drilling machine 100­2900 rpm, with metal table
2 Magnetic welding angles
Magnetic welding angles
1 Lot with hand tools
Lot with hand tolls, 1 container and all tolls from 6 tool walls
5 Roll trestles
Roll trestles, height adjustable
4 Roll trestles
Roll trestles, height adjustable
4 Roll trestles
Roll trestles, height adjustable
4 Roll trestles
Roll trestles, height adjustable
4 Workshop trestles
Workshop trestles, various sizes
6 Workshop trestles
Workshop trestles, various sizes
3 Workshop trestles
Workshop trestles, height adjustable
1 Transport trolley
Transport trolley
3 Workshop trestles
Workshop trestles, height adjustable, length approx. 220 mm, with 2 H­type supports,
length approx. 8000 mm, 3 separation walls
4 Workshop trestles
Workshop trestles, height adjustable, length approx. 220 mm, with 2 H­type supports,
length approx. 6000 mm, 2 U­type supports, length approx. 6000 mm and separation
wall
1 Lot with screw clamps / clamp pliers
Lot with screw clamps / clamp pliers, +/­ 100 pcs., various sizes and length, with stand
1 Lot with formwork panels
Lot with formwork panels, 10 pcs., various length
2 Webs
Webs
2 Double ladders
Double ladders, aluminium/wood
3 Transport trollies
Transport trollies
1 Transport trolley
Transport trolley
1 Transport trolley
Transport trolley
4 Transport trollies
Transport trollies
1 Straightening press
Straightening press
1 Straightening press
Straightening press, hydraulic, with various belongings
1 Double belt grinding machine
Double belt grinding machine, belt width 46 / 100 mm
2 Welding tables
Welding tables
100.00
10.00
40.00
30.00
30.00
30.00
30.00
20.00
20.00
10.00
20.00
80.00
80.00
100.00
50.00
10.00
10.00
30.00
20.00
20.00
30.00
60.00
90.00
70.00
20.00
Lot
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
280
281
282
283
284
285
286
287
Number Description
Starting Bid
1 Stand
Stand, height adjustable
1 Stand
Stand, aluminium
1 Transport frame
Transport frame for plates/windows
2 Welding separation walls
Welding separation walls, dimension approx. 1500x2130 mm, mobile
2 Welding separation walls
Welding separation walls, dimension approx. 910x2060 mm, mobile
1 Lot with s/s tubes
Lot with s/s tubes
1 Lot with steel Lot with steel, length up to approx. 6000 mm, various profiles, with 4 trestles
1 Lot with pallet content
Lot with pallet content
1 Lot with lifting angles
Lot with lifting angles
1 Lot with machine parts
Lot with machine parts, with trolley and pallet
1 Compressed air hose roll
Zeca, Compressed air hose roll, length 7.5 m, with pressure measurer
1 Aluminium fence
Aluminium fence, with opening, length approx. 2x3000 mm, height approx. 950 mm
1 Garden door
Garden door, length approx. 1500 mm
1 Lot with steel storage
Lot with steel storige, various profiles, length up to approx. 6000 mm, with cantilever rack
1 Lot with steel / aluminium storage
Lot with steel / aluminium storage, various profiles, length up to approx. 6000 mm, with
cantilever rack
1 Roll with packaging material
Roll with packaging material
1 Crane
Comlift, year built 2014, serial number GS 1407150, Crane, hydraulic, lifting force 1000
kg, lifting height 2450 mm, mobile, with extension
1 Straightening press
Straightening press
1 Lot with pallet content
Lot with pallet content, 2 clamping pliers, various tools, door handles, belt, cone, etc.
1 Work bench
Work bench, dimension approx. 2005x1595x800 mm
1 Work bench
Work bench, mounted at the wall, dimension approx. 3700x750x855 mm, with bench
vice
1 Tool trolley
Lista, Tool trolley, with 5 drawers, with content
1 Drawer cabinet
Lista, Drawer cabinet, with 5 drawers, with content
1 Bench vice
Bench vice
1 Bench vice
Bench vice
5.00
5.00
30.00
40.00
40.00
20.00
50.00
10.00
15.00
20.00
20.00
40.00
40.00
100.00
150.00
20.00
200.00
40.00
30.00
50.00
50.00
100.00
80.00
30.00
20.00
Lot
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
Number Description
Starting Bid
1 Bench vice
Bench vice
1 Bench vice
Gressel, Bench vice
1 Bench vice
Bench vice
1 Lot with core drills
Lot with core drills, for wood, +/­ 20 pcs.
2 Welding masks
Welding masks
1 Trolley
Trolley
1 Trolley with content
Trolley with content
1 Metal door
Metal door, with frame, frame size approx. 1025x2040 mm
4 Semi­finished products
Semi­finished products
1 Wisst­Trans X plate
Wisst­Trans X plate, dimension approx. 1500x1080x28 mm
1 Plates
Plates
1 Aluminium ladder
Aluminium ladder, length approx. 3500 mm
20 Stands
Stands
2 Frames
Frames, with 1 plate
6 Aluminium tubes
Aluminium tobes, length approx. 3000 mm, diameter approx. 40 mm
10 Duct grids
Duct grids, dimension approx. 840x490x30 mm, galvanised
4 Tires
Continental, Vanco 2, Tires, size 205/65 R 16 C
4 Tires
Dunlop, Econodrive, Tires, size 215/65 R 16 C
4 Tires
Michelin, Aglis, Tires, size 235/65 R 16 C
4 Tires
Continental, VancoWinter 2, Tires, size 235/65 R 16 C, passend zu Mercedes­Benz
Sprinter 313
4 Tires
Continental, ContiEcoContact 3, Tires, size 185/65 R 15 88T, passend zu Mercedes­
Benz A 170
4 Tires
Michelin, Alpin, Tires, size 185/65 R 15, with rims
1 Pallet lifter
Pallet lifter, lifting force 2500 kg
7 Bar stools
Bar stools
1 Lot with grids
Lot with grids, dimension approx. 3000x1500 mm
20.00
30.00
20.00
20.00
30.00
10.00
20.00
20.00
10.00
10.00
5.00
20.00
10.00
10.00
20.00
30.00
20.00
20.00
20.00
20.00
20.00
20.00
100.00
30.00
10.00
Lot
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
Number Description
Starting Bid
3 Transport trollies for rod material
Transport trollies for rod material
1 Transport trolley for plates
Transport trolley for plates
1 Transport trolley for plates
Transport trolley for plates
3 Transport trollies for rod material
Transport trollies for rod material
1 Transport trolley for plates
Transport trolley for plates
2 Transport trollies for rod material
Transport trollies for rod material
2 Container trollies
Container trollies
1 Transport trolley
Transport trolley
1 Rack
Rack, dimension approx. 2200x800x2220 mm
1 Lot with crane rails
Lot with crane rails, 16x 6000 mm, 1 curve, with transport frames, 2 grid pallets with
connection pieses and tubes for fixing, 2nd location hall, 1 pallet with hoders and rolls
1 Lot with steel
Lot with steel, various profiles
1 Lot with cantilever rack
Lot with cantilever rack, 2 support elements, approx. 4250 mm, arm length approx. 780
mm, dismantled
1 Rack for rod material
Rack for rod material, with 4 aluminium gutters
1 Crane fork
Crane fork
2 Trestles
Trestles, length approx. 2050 mm, height approx. 1200 mm
1 Lot with pallets
Lot with pallets, +/­ 150 pcs., 10 covers, 11 small frames, 8 frames
1 Lot with transport trollies
Lot with trnsport trollies, 17 pcs., for plates and rod material
1 Aluminium fountain trough
Aluminium fountain trough, length approx. 5000 mm, has to be dismantled
1 Crane fork
Crane fork
1 Transport trolley
Transport trolley, dimension approx. 3000x1270x920 mm
5 Transport trollies
Transport trollies
6 Transport trollies
Transport trollies
4 Transport trollies
Transport trollies
4 Transport trollies
Transport trollies
3 Transport trollies
Transport trollies, with plates
20.00
10.00
10.00
20.00
10.00
10.00
10.00
10.00
10.00
100.00
30.00
40.00
20.00
20.00
10.00
50.00
50.00
50.00
20.00
30.00
40.00
45.00
30.00
30.00
20.00
Lot
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
Number Description
Starting Bid
1 Lot with transport platforms
Lot with transport platforms, 3 pcs., dimension 1x approx. 5000x750 mm, 2x 4000x750
mm, with transport trollies
1 Rod rack
Rod rack, with content, without lot 340
1 Fork extensions for stacker
Fork extensions for stacker, length approx. 2400 mm, for fork width 165 mm
1 Lot with Pavatex plates
Lot with Pavatex plates, 10 pcs., dimension approx. 3000x1500x4 mm, with frame
2 Transport trollies
Transport trollies, with content
1 Saw table
Saw table, dimension approx. 2220x850x940 mm, mobile
1 Cleaning device
Kärcher, S 750, Cleaning device
1 Belt saw
Metabo, BS 1638 W, Belt saw
1 Industrial vacuum cleaner
Widmer, Industrial vacuum cleaner, container content 70 l
4 Rolls with padding tape
Rolls with padding tape
1 Lot with isolation
Lot with isolation, 2 locations
2 Racks
Racks, dimension 1x approx. 3300x1200x2450 mm and 1x approx. 2350x900x2450
mm
2 Extension ladders
Extension ladders, aluminium, length approx. 9 m
1 Roll with padding mat
Roll with padding mat, width approx. 1500 mm
1 Bicycle stand
Bicycle stand, for 10 bicycles, length approx. 3500 mm
1 Shelf system
Shelf system, dimension approx. 3130/3130x510x2500 mm, field size approx. 1010
mm, with 1 pallet with shelves and 2 support elements not mounted
1 Lot with covers
Lot with covers
1 Railing
Railing, end piece, dimension approx. 3740x2600x50x1005 mm
1 Round bar
Round bar
2 Plate trollies
Plate trollies
1 Plate trolley
Plate trolley, with content
1 Lot with material runway
Lot with material runway, length approx. 10500 mm, width approx. 310 mm, with
supports, leveling rule, dismantled
1 Shelf system
Shelf system, dismantled
2 Drawer cabinets
Drawer cabinets, with 3 drawers
50.00
40.00
40.00
10.00
20.00
30.00
50.00
100.00
50.00
10.00
20.00
40.00
100.00
20.00
40.00
100.00
20.00
30.00
30.00
20.00
10.00
50.00
30.00
40.00
Lot
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
Number Description
Starting Bid
1 Stairs
Stairs, height approx. 1180 mm, mobile
2 Wheel barrows
Wheel barrows
1 Transport trolley
Transport trolley
1 Transport trolley
Transport trolley
1 Transport trolley
Transport trolley, with tub
1 Transport trolley for rod material
Transport trolley for rod material, with content
2 Plate trollies
Plate trollies
1 Trolley
Trolley
1 Transport trolley
Transport trolley
1 Transport trolley
Transport trolley
1 Transport trolley
Transport trolley
2 Transport trollies
Transport trollies
2 Paper roll stands
Kimberly­Clark, Paper roll stands
1 Rack
Rack, dimension approx. 2170x860x1900 mm, with content
1 Small cabinet
Small cabinet, with content, mobile
6 Barrier supports
Barrier supports, height approx. 1200 mm, 2 locations, platform
1 Web Web
1 Chain saw
Alpina, P 360, Chain saw, sword length approx. 320 mm
1 Chain saw
Castor, CP 450, Chain saw, sword length approx. 450 mm
1 Thread cutter Komatsu, BC2201DL, Thread cutter
1 Lot with pallet content
Gyso, Lot with pallet content, 29 rolls fabric tape, 3 rolls films, with pallet and frame
1 Barrel with universal thinner
Barrel with universal thinner, with collection trough
1 Barrel Barrel, content unknown, with collection trough
1 Lot with formwork panels
Lot with formwork panels, 13x dimension approx. 3000x500x30 mm, 12x dimension
approx. 2000x500x25 mm, 8x dimension approx. 2000x500x40 mm
1 Lot with semi­finished products
Lot with semi­finished products, steel, various length, 3 locations, with trolley and holder
2 Ladders
Ladders, various length
30.00
40.00
10.00
20.00
10.00
10.00
30.00
20.00
10.00
30.00
10.00
20.00
10.00
20.00
20.00
15.00
15.00
40.00
50.00
30.00
20.00
30.00
10.00
50.00
20.00
20.00
Lot
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
Number Description
1 Transport trolley
Transpolrt trolley
1 Trolley
Trolley, capacity 200 kg
1 Transport trolley
Transport trolley, dimension approx. 3010x1015x1080 mm
1 Transport trolley
Transport trolley, dimension approx. 2300x1000x910 mm
3 Trollies
Trollies
1 Transport trolley
Transport trolley
6 Transport trollies
Transport trollies
2 Transport trollies
Transport trollies
1 Mounting trestle
Mounting trexle, height adjustable, dimension approx. 5000x1200x1110 mm
2 Workshop trestles
Workshop trestles, length approx. 1305 mm, height approx. 800 mm, mobile
2 Workshop trestles
Workshop trestles, length approx. 1305 mm, height approx. 800 mm, mobile
2 Workshop trestles
Workshop trestles, length approx. 1305 mm, height approx. 800 mm, mobile
2 Workshop trestles
Workshop trestles, length approx. 600 mm, height approx. 780 mm, mobile
5 Brackets
Brackets
1 Lifting clamp
Renfroe, Lifting clamp, capacity 3000 kg
1 Lifting bracket
Renfroe, Lifting bracket, capacity 3000 kg
2 Lifting yokes
Lifting yokes, with 2 lifting clamps, capacity 500 kg each, with stand
1 Lifting yoke Lifting yoke, with 2 lifting clamps, capacity 500 kg each
1 Pallet trolley
Pallet trolley
1 Compressed air hose roll
Tool air, Compressed air hose roll, length 15 m
1 Lot with compressed air hoses
Festo, Lot with compressed air hoses, various diameters, as new
1 Lot with tools
Lot with tools
3 Magnetic lifters
Magnetic lifters
5 Vacuum lifters
Vacuum lifters
1 Double plug
Double plug, 400 V
6 Holding brackets
Holding brackets
Starting Bid
10.00
20.00
40.00
40.00
50.00
20.00
45.00
20.00
150.00
20.00
20.00
20.00
20.00
30.00
60.00
30.00
40.00
30.00
40.00
30.00
30.00
10.00
15.00
10.00
10.00
20.00
Lot
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
Number Description
Starting Bid
2 Cable rolls
Cable rolls
1 Work bench
Work bench, dimension approx. 3900x1200x1100 mm
1 Work bench
Work bench, dimension approx. 750x600x920 mm
1 Tool trolley
Lista, Tool trolley, with 5 drawers, with content
1 Work bench, with drawer cabinet
Work bench, with drawer cabinet, dimension approx. 1800x730x1030 mm, drawer
cabinet with 6 drawers, with content
3 Roll trestles
Roll trestles, height adjustable
1 Transport trolley
Transport trolley
1 Lot with workshop trestles
Lot with workshop trestles, 6 pcs.
1 Lot with lifting belts
Lot with lifting belts, with wall holder
1 Matal table with stool
Metal table with stool, dimension approx. 1200x600x950 mm
1 Ash tray with sand
Ash tray with sand, including pan with sand
1 Double ladder Double ladder
1 Magnetic board
Magnetic board, dimension approx. 2400x1170 mm
1 Lot with transport platforms
Lot with transport platforms, 3 pcs., dimension 2x approx. 5000x750 mm, 1x 4000x750
mm, with transport trollies
1 Lot with transport platforms
Lot with transport platforms, 1 pcs., dimension 1x approx. 5000x600 mm, 1x 4000x750
mm, with transport trollies
1 Table
Table, dimension approx. 1460x720 mm, with storage compartments
1 Printer
Brother, MFC­7420, Printer with fax, scanner, copier
1 Lot with plate examples
Lot with plate examples, size A4, with compartments
1 Pallet lifter
Pallet lifter, lifting force 2500 kg
1 Pallet lifter
Pallet lifter, lifting force 2500 kg
1 Pallet lifter
Pallet lifter, lifting force 2500 kg
1 Pallet lifter
Pallet lifter, lifting force 2500 kg
1 Transport trolley
Transport trolley
1 Barrel
Barrel
1 Gas grill
Koenig, Compact Plus, Gas grill, with cover
10.00
50.00
30.00
80.00
100.00
20.00
20.00
20.00
10.00
40.00
20.00
10.00
10.00
50.00
50.00
30.00
20.00
10.00
80.00
80.00
80.00
80.00
10.00
10.00
50.00
Lot
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
Number Description
Starting Bid
1 Lot with plant pots
Lot with plant post, 2 pcs.
3 Hand cleaning cream
ZVG, HR Racing basic, Hand cleaning cream, content 10 l
6 Rolls with rubber belt
Rolls with rubber belt, for matrices, length 120 m, width approx. 200 mm
1 Lot with serviette dispenser
Lot with serviette dispenser, 3 pcs.
1 Lot with cables
Lot with cables
1 Machine pedal
Machine pedal
1 Lot with binding material / shrinking film
Lot with binding material / shrinking film
1 Safe
Hadak, MOD 634, Safe, dimension approx. 790x600x1998 mm, with key
1 Metal cabinet
Metal cabinet, dimension approx. 850x400x1900 mm, with content, cleaning material,
vacuum cleaner
1 Wardrobe
Lista, Wardrobe, 3 doors
2 Wardrobes
Wardrobes, 3 doors
1 Drink dispenser for PET bottles 0.5 l
Vendo S.P.A., VF 217 / Rhodos, serial number 1720011051, Drink dispenser for PET
bottles 0.5 l, cooling liquid R 134a, for 6 products
1 Drinking water preparer
Firewall, AQD 3 CAS, Drinking water preparer, filtering, cooling and carbonating
1 Refrigerator with freezer
Hisense, Refrigerator with freezer
1 Radio / CD
CMX, Radio / CD
2 Stands
Stands
1 Table
Table, dimension approx. 2930x2005x775 mm, with 15 chairs
1 Lot with kitchen equipment
Lot with kitchen equipment, glasses, plates, cutlery, etc.
1 Party table
Party table, with 4 benches, location gallery
1 Lot with office furniture
Lot with office furniture, desk with counter, dimension approx. 2600x2100x740 mm, 2
office chairs, drawer cabinet
1 Lot with office furniture
Lot with office furniture, angle desk, dimension approx. 2810x2600x760 mm, office
chair, 2 drawer cabinets
1 Filing rondel
Filing rondel, diameter approx. 810 mm
1 Filing rondel
Filing rondel, diameter approx. 810 mm
1 Copier
Toshiba, E­Studio 233p, Copier with fax, scanner
20.00
40.00
30.00
20.00
10.00
20.00
40.00
100.00
60.00
20.00
40.00
250.00
150.00
50.00
20.00
10.00
60.00
20.00
20.00
100.00
80.00
30.00
20.00
100.00
Lot
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
Number Description
Starting Bid
1 Lot with pc
Dell, HP,, Lot with pc, 3 processors, 3 screens, 4 keyboards, 3 mouses
1 Printer
HP, Designjet 110plus, Printer
1 Printer
Brother, MFC­7840W, Printer with fax, scanner, copier
1 Lot with telephones
Lot with telephones, 7 pcs., location all offices
1 Lot with filing compartments
Lot with filing compartments
1 Lot with aluminium filing compartments
Lot with aluminium filing compartments, 13 pcs.
1 Key box
Key box
1 Level
Level, length approx. 2000 mm
8 Callipers
Callipers
1 Lot with measuring devices
Lot with measuring devices, 8 pcs.
1 Laser distance measurer
Ultrasonic, Laser distance measurer
1 Device
Bosch, DMO 10, Device
2 Construction site helmets
Construction site helmets
1 Lot with printer cartridges
Lot with printer cartridges, various brands
1 Lot with pc programs
Lot with pc programs
2 Hard disc
Iomega, Hard disc, 80 GB
1 Lot with speakers
Logitech, Lot with speakers
1 Lot with magnetic boards
Lot with magnetic boards, 2 pcs., 1 decoration
1 Digital camera
Panasonic, DMC­FS15 Lumix, Digital camera, 12 mega pixel, charger, bag and
connection cable
1 Aquarium pump
Eden, 135, Aquarium pump, as new, capacity see picture
1 Reception desk
Reception desk, dimension approx. 2650x455x1120 mm
1 Filing cabinet
Filing cabinet, dimension approx. 1200x400x1000 mm, with content, copy paper
1 Sliding door cabinet
Sliding door cabinet, dimension approx. 1200x400x1130 mm
1 Lot with office furniture
Lot with office furniture, desk dimension approx. 1800x1000x720 mm, 2 tables,
dimension approx. 1200x600x690 mm, small drawer cabinet, 2 office chairs and coat
rack
1 High desk with small drawer cabinet
High desk with small drawer cabinet, dimension approx. 1390x1000x1040 mm
80.00
50.00
30.00
30.00
30.00
10.00
10.00
10.00
20.00
20.00
20.00
10.00
10.00
20.00
20.00
30.00
20.00
20.00
30.00
20.00
50.00
50.00
20.00
60.00
40.00
Lot
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
Number Description
Starting Bid
2 Magnetic boards
Magnetic boards, dimension approx. 2900x1200 mm and 1000x700 mm
1 Lot with pc
Compac, EVO, Lot with pc, processor, "HP" screen, keyboard and "Toshiba" printer
1 High desk with small drawer cabinet
High desk with small drawer cabinet, dimension approx. 1390x1000x1040 mm
1 Filing rack
Filing rack, dimension approx. 1550x380x1630 mm
1 Cleaning trolley
Cleaning trolley, with cabinet content, vacuum cleaner, etc.
1 Lot with office furniture
Artmodul, Lot with office furniture, desk dimension approx. 1800x1030x750 mm, 2 small
drawer cabinets, filing cabinet, 2 filing racks, office chair, coat rack and office trolley
1 Lot with office furniture
Lot with office furniture, desk dimension approx. 1800x1000x750 mm, small drawer
cabinet and office chair
3 Cabinets
Elan, Cabinets, 2x dimension approx. 800x410x1850 mm, 1x dimension approx.
800x410x2220 mm
2 Sliding door cabinets
CP, Sliding door cabinet, dimension approx. 1000x420x1980 mm and 600x420x1980
mm
1 Drawer cabinet
Elan, Drawer cabinet, dimension approx. 810x410x1120 mm
1 Drawer cabinet
Bisley, Drawer cabinet, dimension approx. 800x605x1020 mm
1 Metal cabinet
Metal cabinet, dimension approx. 750x440x900 mm
1 Safe
Targo, Safe, without locking device, dimension approx. 670x570x1260 mm
1 Table
Table, dimension approx. 1795x995x755 mm, with 4 chairs
1 Printer
HP, LaserJet 4250 tn, Printer, with toner and cabinet
1 Printer
HP, Officejet Pro 8500A, Printer with fax, scanner, copier
1 Lot with pc
Lot with pc, processor, 2 screens, keyboard and mouse
1 Stereo system
Sharp, Stereo system
1 Shredder
Raxel, Shredder
1 Heater
Tool­air, 6300 A, Heater, 2000 W
1 Welding mask Esab, Warrior Tech, Welding mask
1 Cash box
Cash box
1 Ear protection
3M, E­A­R Classic 2, Ear protection, content 250 pair
1 Lot with working clothes
Lot with working clothes, some as new, with labeling
20.00
30.00
40.00
40.00
40.00
60.00
30.00
50.00
30.00
20.00
20.00
10.00
10.00
20.00
40.00
40.00
40.00
20.00
20.00
10.00
20.00
10.00
10.00
20.00
Lot
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
1003
Number Description
Starting Bid
1 Meeting table
Meeting table, dimension approx. 2200x1160x755 mm, with 4 chairs
1 Lot with office furniture
Elan, Lot with office furniture, angle desk, dimension approx. 2600x2200x740 mm, 2
small drawer cabinets, office chair, coat rack and office trolley
2 Storage racks
Storage racks, 1 with sliding door dimension approx. 1200x400x700 mm, 1 open
dimension approx. 800x400x700 mm
1 Magnetic board
Magnetic board, dimension approx. 2000x1000 mm
1 Lot with office material
Lot with office material, storage compartments, folders, as new, etc.
1 Refrigerator Liebherr, Comfort, Refrigerator
1 Fan
Sonnenkönig, Fan
3 Ice buckets
Ice buckets
1 Lot with lamps
Lot with lamps, +/­ 19 pcs.
7 Oil/vinegar bottles
Paul Bouise, Oil/vinegar bottles
1 Lot with spraying bins
Innotec, Lot with spraying bins, 13 pcs., as new, Zinc Coat, Alu Finish, Seal and Bond
remover
1 Lot with PVC caps for tubes
Lot with PVC caps for tubes, diameter 25­26 mm
1 Roll with copper plate
Lot with copper plate, width approx. 400 mm
1 Copper cable
Copper cable, 5 wire
1 Round bar
Round bar
1 Double ladder
Brennstuhl, Double ladder, height approx. 1530 mm
2 Heaters
Heaters, blowers, electric­oil
1 Fan
Rotel, Fan
1 Lot with hydraulic oil
Blaser, HVLP 46, Lot with hydraulic oil, pallet container, approx. 550 l
1 Lot with cleaning clothes
Lot with cleaning clothes, +/­ 33 balls with 5 kg content
1 Lot with aluminium plates
Lot with aluminium plates, 8 pcs., various sizes, thickness approx. 10 mm
3 Replacement knives for plate shear
Replacement knives for plate shear, suitable for lot 8
2 Stools
Stools
1 Lot with various devices
Lot with various devices, consisting of playstation, Sennheiser microphone, etc.
1 Winding machine
Wyler, W Y 3, serial number 3571, Winding machine
60.00
50.00
20.00
10.00
30.00
30.00
10.00
10.00
30.00
20.00
10.00
10.00
50.00
30.00
30.00
20.00
30.00
10.00
250.00
50.00
30.00
90.00
10.00
20.00
400.00
Lot
1032
1055
1058
1132
1152
1170
1186
1187
1192
1204
1209
1215
1223
1231
1273
1275
1308
1324
1330
1378
1383
1399
1413
1543
1548
Number Description
Starting Bid
1 Lot with mineral water
Valser, Classic, Lot with mineral water, +/­ 100 bottles, use­by date 05.08.2018, with
crates
1 Electric motor
Elektra, Electric motor, 45 kW
1 Electric motor
Beck + Pfiffner AG, Electric motor, 7/28 kW
1 Drawer cabinet
Lista, Drawer cabinet, with 10 drawers, with content
1 Gas heater
Gas heater
1 Frequency converter
ABB, ACS800­01­0025­3+E202+L503, Frequency converter, as new, original packed
2 Electric motors
Electric motors
7 Electric motors
Electric motors
1 Electric motor
SEW, Electric motor, with gear
1 Electric motor
Beck + Pfiffner AG, Electric motor, 11 kW, 127 kg
2 Electric motors
Beck + Pfiffner AG, Electric motors, 3 kW
2 Electric motors
Electric motors
1 Lot with snow chains
Lot with snow chains, 2 pair
1 Lot with cables
Lot with cables, on 2 pallets
1 Machine bench vice
Machine bench vice, 120 mm
1 Bench vice
Bench vice, 125 mm
3 Cable rolls
Cable rolls
1 Lot with cable and connecting plug
Lot with cable and connecting plug
1 Vacuum cleaner
DeWalt, DC500, Vacuum cleaner
3 Saw ring pliers
Saw ring pliers
1 Loop set
Loop set, with 2 pliers
1 Lot with hand machines
Lot with hand machines, 2 drilling machines, 1 jig saw
1 Box with ball bearings
Box with ball bearings
1 Lot with gears and motor
Lot with gears and motor, 3 gears and 1 motor, weight complete approx. 300 kg, with 2
pallets
1 Lot with gears and motor
Lot with gears and motor, 2 gears and 1 motor each, weight complete approx. 300 kg,
with pallet
50.00
180.00
100.00
90.00
10.00
100.00
60.00
120.00
100.00
180.00
70.00
60.00
20.00
100.00
20.00
40.00
40.00
50.00
40.00
20.00
20.00
20.00
20.00
100.00
120.00
Lot
1564
1566
1567
1574
1580
1582
1588
1598
1601
1603
1608
1610
1611
1612
1617
1618
1645
1673
1999
2000
Number Description
Starting Bid
1 Lot with various motors
50.00
Lot with various motors, with pallet and wooden frame
1 Resistance device
30.00
Widap, Resistance device, dimension approx. 700x500x450 mm
2 Electric test motors
30.00
Electric test motors
1 Stator
50.00
Stator, with pallet
1 Gear motor with brake
70.00
Baumüller, GNAG 160 SV, Gear motor with brake, capacity 15 kW, weight approx. 350
kg, with pallet
1 Gear motor with brake
70.00
NS­Mot, EFG 180 L, Gear motor with brake, capacity 15 kW, weight approx. 300 kg, with
pallet
1 Lot with various gear motors with break
70.00
Baumüller, Lot with various gear motors with brake, with pallet
1 Lot with pump and electric motor
40.00
Lot with pump and electric motor
1 Lot with various test devices
30.00
Lot with various test devices
1 Stator
50.00
Stator, with pallet
1 Lot with various dc motors
80.00
Lot with various dc motors, 3 pcs., weight approx. 150 kg, with pallet
1 DC motor
100.00
Siemens, DC motor, capacity 0.39/9.05 kW, weight approx. 450 kg, with pallet
1 DC motor
70.00
Baumüller, GNEFG 160 YV, DC motor, capacity 25 kW, weight approx. 500 kg, with
pallet
1 DC motor
70.00
Baumüller, GNVG 180 L, DC motor, capacity 45 kW, weight approx. 500 kg, with pallet
1 DC motor
70.00
Dietz, LDN 8.5, DC motor, capacity 8.5/2.9 kW, weight approx. 400 kg, with pallet
1 DC motor
70.00
Baumüller, GNEFG 160 YV, DC motor, capacity 15 kW, weight approx.500 kg, with
pallet
1 Gear motor with brake
70.00
Baumüller, GNAG 132 LN, Gear motor with brake, capacity 60 kW, weight approx. 300
kg, with pallet
1 Lot with small transformers
40.00
Lot with small transformers, +/­ 6 pcs.
1 Lot with break resistors and various
250.00
Lot with break resistors and various
1 Plate shear
17,000.00
Warcom, CO 100­3/S, Plate shear; front table depth approx. 1000 mm, machining width
approx. 10'100 mm, plate thickness until max approx. 12 mm, foundation depth approx.
300 mm, machine dimension approx. 11'300x3250x3650 mm, weight approx. 110 t
without accessories, incl. slide­in table, length approx. 7000 mm (9000 mm), width
approx. 2000 mm, documentation and plans available, (dismantling by appointment with
Troostwijk AG, this machine must be dismantled first)
Lot
2001
2002
2003
Number Description
Starting Bid
1 Edging machine
15,000.00
Colgar, PL 1100.81/101, year built 1990, serial number 9006/90/A829, Edging machine;
capacity approx. 10 kN (1100 t), bending width approx. 10'100 mm, plate thickness until
approx. 12 mm, control DNC7000, thorat in the stands max approx. 500 mm, culvert
approx. 8100 m, regulable throw 50­355 mm, foundation depth approx. 1020+1630 mm,
incl. a podium with stairs and crane system, 2 tool storage racks with content, various
tools on +/­ 22 pallets, a tool cabinet with accessories, a tool trolley with hand tool,
without safe cabinet, bending possibilities profiles see photos, documentation and plans
available, machine dimension approx. 10'100x2800x8500 mm, weight approx. 151'000
kg without tools and accessories, (dismantling by appointment with Troostwijk AG)
1 Hydraulic press brake
22,500.00
Lobema, Lobema strong 4,6 / 1,5, year built 2013, Hydraulic press brake, bending
length 4,6 m, plate thickness up to 1,5 mm steel, up to 2,0 mm Aluminium, with hydr. roll
shears, manual top beam­(radius)­adjustment, nc control ELGO P 40, manuel or
automatical mode for 1 man or 2 man mode, ce­conform, with emergency stop rail and
Food­interruptors, incl. technical documentation and manual
1 CNC punching­nibbeling machine
9,500.00
Trumpf, Trumatic TC 120 Rotation, year built 1993, CNC punching­nibbeling machine,
punching force 15 tons, max. plate thickness 4 mm, x­axis 1000 mm, y­axis 1000 mm,
10 tool places, with 2 additional side tables, CNC control Bosch Trumagraph CC 220
(Screen 2014 replaced), incl. punching tools, tool holders and further belongings, 4 air
suspension machine legs, complete technical documentation
General conditions Online Auction TroostwijkAuctions.com
Article 1. Definitions
General Terms
and
Conditions of
Use:
General Online
Auction
Terms and
Conditions:
User:
User contract:
Bidder:
Bid:
Purchase price:
Purchase
contract:
Buyer:
Lot:
(Online) Auction:
Registration:
Specific Online
Auction
Terms and
Conditions:
Troostwijk:
Seller:
Website:
Knock­down:
The general terms and conditions which regulate the use of the Website of Troostwijk Veilingen
B.V.
The present General Terms and Conditions, which define the stipulations of an auction
A person who registers on the Website of Troostwijk Veilingen B.V.
The contract between Troostwijk Veilingen B.V. and the user
A person who submits a bid at an online auction
Each binding amount offered for an item in the auction by the user
Composed of the highest bid at the end of the auction, the surcharge and possibly incurring
VAT.
Contract between the buyer and the seller which results from the adjudication by Troostwijk
Bidder who receives the knock­down for the item
Item(s), which is/are auctioned (combination = several items offered under one lot number)
The auction of movable goods organised by Troostwijk on the website of Troostwijk Veilingen B.V.
Registration of the user on the website of Troostwijk Veilingen B.V., whereby the registration form on the website must be
completely filled out
Special requirements for a specific auction
Troostwijk plc, Zurich
The person or persons who commission the auction of a lot
The website www.TroostwijkAuctions.com, which is maintained by Troostwijk Veilingen B.V. in Amsterdam and which is the
platform for auctions carried out by Troostwijk
Confirmation by Troostwijk that the highest bidder wins the bid for an lot or combination by payment of the purchase price.
Article 2. General Terms and Conditions
2.1 Troostwijk auctions take place on the website of Troostwijk Veilingen B.V., which provides the platform for auctions. The website is used by
the user according to the General Terms and Conditions of Troostwijk Veilingen B.V.
2.2 The General Online Auction Terms and Conditions contain the general regulations for the auction. The auction takes place solely on the basis
of these terms and conditions, which are accepted by participation at the auction. At an auction, Specific Online Auction Terms and Conditions
may also apply. These contain amendments or deviations to the General Online Auction Terms and Conditions. The Specific Online Auction
Terms and Conditions shall have precedence.
2.3 Troostwijk can amend these General Online Auction Terms and Conditions. Amendments shall enter into force upon receipt of a
corresponding notification by users and bidders.
Article 3. Registration
3.1 Only bidders who have registered as users with Troostwijk Veilingen B.V. and who have accepted the General Terms and Conditions of Use
can participate at auctions.
3.2 Only persons who have accepted the General Online Auction Terms and Conditions and the Specific Online Auction Terms and Conditions for
an auction may submit a bid.
Article 4. Auction
www.TroostwijkAuctions.com
4.1. An auction can take place on behalf of the Seller and on his own account. Troostwijk is not a contractual party of a purchase contract which
results from a knock­down, but merely the agent of such a purchase contract.
4.2 Deadlines, such as the start and end of an auction, are contained in the Specific Online Auction Terms and Conditions.
4.3 The organisation, preparation and execution of the Auction are Troostwijk’s business.
4.4 Troostwijk is authorized:
­ to refuse the knock­down in general or—for important reasons—to specific Bidders;
­ to exclude Bidders from an auction;
­ to rectify mistakes made by Troostwijk for bids and/or knock­downs by a corresponding notification of the Bidder;
­ to undertake other necessary measures;
4.5 The ruling of Troostwijk regarding what has taken place at an auction is binding.
Article 5. Cancellation, Technical Disturbances
5.1 Troostwijk reserves the right to cancel, prematurely terminate or extend an Auction on good cause shown. In cases of a technical disturbance
of the Website, or should it not be entirely accessible to some or all Users, Troostwijk has the right to prolong the Auction by up to 24 hours.
Troostwijk and/or the seller can reject bids without stating the reasons. Troostwijk and the Seller are entitled to place bids.
5.2 The User declares with his registration that he is aware of the particular circumstances of an Internet auction. He furthermore declares that he
is particularly aware of the fact that, according to the present status of technology, technical disturbances and breakdowns can occur which can
make access to the Internet auction and the Website either difficult or even impossible.
5.3 Troostwijk is only liable for the orderly execution of the auction on the Website of www.Troostwijkauctions.com, but not for technical
disturbances. The liability of Troostwijk is limited to and complies with the General Terms and Conditions for Online Auctions as outlined in
Article 15.
Article 6. Viewing; Entry to Buildings and Premises
6.1 Dates for viewing appointments are listed in the Specific Online Auction Terms and Conditions.
6.2 Entry to buildings and premises is at a person’s own risk. Instructions by Troostwijk or any persons appointed by them must be followed.
Neither the Seller nor Troostwijk shall accept any liability for damages which have occurred as a result of entry to buildings and premises. In
any other case, the limits to liability contained in Article 15 of the General Online Auction Terms and Conditions for Troostwijk and the Seller
shall apply.
Article 7. Lots
7.1 Individual Lots or Combinations shall be auctioned.
7.2 Combinations, the simultaneous auction of several Lots, shall be indicated in the system.
In the case of Combinations, the auction shall be carried out in two steps:
a) First, the individual Lots shall be submitted to auction. The Knock­down shall take place subject to the prior condition that the Lot is not
being adjudicated as part of a Combination. Bidding for the Combinations shall begin after the Knock­down for the individual Lots. If no bids
are made for the Combination, the Lots shall be auctioned individually.
b) Insofar as bids are made for Combinations, the following shall apply:
The Knock­down shall be awarded for the Combination when the highest bid which can be made for a knock­down of the Combination is
higher than the sum of the bids for the individual Lots. The Knock­down for the individual Lots is then considered as not effected due to lack of
condition precedent.
7.3 Troostwijk has the right to assemble different objects into Lots, divide Lots and/or remove them from the auction.
7.4 Troostwijk has the right to request a normal banking security from the Bidder in advance to back certain Lots.
Article 8. Bids
8.1 A Bidder can submit Bids for auctions for which he is registered. Bidders can submit bids for one or several lots. Bids can only be made if they
are free of reserve and conditions. Bids are binding and cannot be retracted. The Bidder shall receive a confirmation by e­mail for every bid
submitted and overbid by a third party. This notification does not constitute the knock­down.
8.2 Bids can be submitted as static bids or auto bids.
(a) static bid: The user bids a fixed amount for each Lot indicated in the system.
(b) auto bid: the user indicates the highest price he is willing to pay for a Lot. The auto bid is not displayed in the system. Should a third party
www.TroostwijkAuctions.com
overbid the user, the current offer shall be increased by increments until a third party overbids the proxy bid. During this time, an automatic bid
can only be ceased by the user if he submits a static bid which constitutes the highest bid at that moment.
8.3 VAT and surcharge are not included in the bids. The amount of the surcharge results from the Special Online Auction Terms and Conditions.
8.4 Troostwijk and/or the seller have the right to refuse bids without giving a reason. Troostwijk has the right to submit bids on behalf of third
parties.
Article 9. Award & Contract of sale
9.1 A purchase contract for one or several Lots is concluded only after the Knock­down. The Buyer shall be notified by e­mail about the resulting
purchase contract (knock­down). The Knock­down shall take place at the latest two working days after the end of the auction.
9.2 Troostwijk has the right to make no Knock­down or to grant one subject to condition precedent.
9.3 As a rule, the User who has made the highest bid shall receive the Knock­down. The Knock­down takes place if no other bid is made 10
minutes prior to the end of the auction. Should a further bid be submitted, the auction shall end upon the submission of the highest bid which is
not overbid within 5 minutes.
Article 10. Transfer of risk/Transfer of title
10.1 The risk of accidental loss of the objects purchased at auction as well as risk of loss or damage by fire, theft or burglary shall transfer to the
buyer after the knock­down.
10.2 Title shall be transferred to the buyer only after payment in full has been effected.
Article 11. Buyer’s Obligations
11.1 The buyer is obligated to pay the purchase price in addition to the mandatory sales tax and the surcharge as well as to collect the lot(s) when
the knock­down has occurred.
11.2 Payment must be effected to an account indicated by Troostwijk in the specified currency within three working days after the knock­down.
11.3 The statutory default interest shall be charged in the case of delayed payment. The seller’s rights shall comply with
the legal requirements.
11.4 Should the buyer not fulfil an obligation, particularly if:
(i) the purchase price is not paid in due time or not paid completely
(ii) the Lots are not collected in due time, and/or
(iii) the information required for delivery is not procured,
then it shall automatically be considered as default, without any further notice of default being required. Troostwijk shall then have the right to
cancel the purchase contract on behalf of the seller. In this case, Troostwijk is free to reassign the Lots to another Bidder, and Troostwijk
and/or the seller shall not be liable for damages.
11.5 In the event of a cancellation, the buyer shall be liable for payment of damages which ensue therefrom.
Article 12. Collection
12.1 The Buyer is only authorized and bound to the dates and times listed in the Specific Online Auction Terms and Conditions for the collection of
items. For technical reasons, Troostwijk can determine that a particular Lot can be collected only after the delivery of other Lots.
12.2 The Buyer whose Lot(s) hinder/s the collection of other lots is obligated to see to the collection of those lots without delay after being notified
by Troostwijk by email and/or a message of the address supplied by the Buyer. Should this not occur, then Troostwijk shall have the right to
undertake the collection and possible storage of the items by third parties on the buyer’s risk and expense.
12.3 The Buyer is obligated to carefully disassemble, reassemble and collect his Lots. He shall be liable for damages which ensue to the property
of third parties in connection with the assembly and collection. Furthermore, he is obligated to protect Troostwijk and the Seller from any
claims by third parties which result from the dismantling, reassembly and/or collection of his Lots.
12.4 The Buyer is obligated to follow the instructions of Troostwijk and/or any persons mandated by Troostwijk for the dismantling, reassembly and
collection of his Lots.
12.5 The Buyer is obligated to ensure that he or the person(s) who take care of dismantling, assembly or transport shall be in possession of the
necessary authorizations. Neither Troostwijk or the Seller can be held liable for the lack of necessary authorizations and/or that the official
requirements are not upheld during dismantling, reassembly and collection.
12.6 In cases when it is necessary to dismantle buildings (in pieces) in order to remove the allotted Lots, prior consultation as well as written
agreement by Troostwijk are required, and the conditions set down by Troostwijk for awarding of the knock­down must be respected.
www.TroostwijkAuctions.com
12.7 Troostwijk reserves the right to request a deposit prior to collection of Lots in order to cover possible damages. The Buyer shall be notified of
the Lots concerned and the amount of the deposit. The deposit shall be refunded to the Buyer after safe collection without any damage.
Article 13: Liability/Warranty of Troostwijk
Troostwijk shall only be liable for the preparation and carrying out of the auction according to the legal stipulations. In addition, the following shall
apply:
13.1 Claims by the Seller, the Bidder or the Buyer for neglect of duty shall be excluded, particularly for any advice regarding appraisals or flaws of
the Items.
13.2 The descriptions of the Items by Troostwijk, e.g. in the sales catalogue or in any listing, are based on the information supplied by the Seller.
Troostwijk shall only be liable for the correct transmission of this information, but not for its objective accuracy.
13.3 Details indicated by Troostwijk are only for the purpose of distinguishability and do not constitute any kind of guarantee.
13.4 The Items are used. Troostwijk shall not assume any guarantee for material flaws and defects of title and shall not be liable for the amount,
quality, measurements, year of construction or completeness.
13.5 The above restrictions shall not apply if Troostwijk acts intentionally or with gross negligence, is in breach of a fundamental contract
requirement or if bodily harm occurs.
Article 14: Liability/Warranty of Seller
The Seller is liable to the Buyer for defects of the items in compliance with the following stipulations:
14.1 The Buyer has had the opportunity to view the items in advance. The sale shall take place as viewed and excluding all warranties for defects
and title. The sale has taken place, particularly without guarantee for visible or latent defects or guarantee regarding completeness, number,
effect, utility, usability, saleability, the presence or absence of rights or claims of third parties and/or the transferability to third parties.
14.2 The Seller excludes liability for a particular characteristic or for common use of the items.
14.3 The Seller excludes all liability for publicity statements of the manufacturer.
14.4 The above restrictions shall not apply if the Seller has intentionally misrepresented any defects to the Buyer, breached a fundamental
contractual obligation or if any bodily harm occurs.
Article 15. Limitation of Liability Troostwijk/Seller
15.1 The limitation of liability is valid for Troostwijk and the Seller as well as for their legal representatives, managerial employees and auxiliary
helpers.
15.2 Liability shall only exist in the case of malicious intent or gross negligence.
15.3 Liability shall exist for collateral damage, particularly for lost profit, only in cases of intent or gross negligence.
15.4 The liability shall be restricted to the amount of typically foreseeable damages at conclusion of the contract, insofar as there is no case of
intent or gross negligence.
15.5 The above­mentioned restrictions do not apply in cases of breach of a contractual obligation, acceptance of an explicitly stated guarantee as
well as damages resulting from bodily harm, harm to health and obligatory legal regulations.
Article 16. Severability Clause/Written Form
16.1 Should any of the provisions of these General Online Auction Terms and Conditions become completely or partly invalid, void or not
enforceable, it shall have no effect on the other provisions of the General Online Auction Terms and Conditions. The invalid, void or not
enforceable provision shall be replaced by a valid and enforceable provision which comes closest to fulfilling the parties’ economic goals
which were originally intended by the invalid, void or not enforceable provision.
16.2 Modifications and amendments of these General Online Auction Terms and Conditions shall only be effective upon written agreement by the
parties.
Article 17. Applicable Law/Court of Jurisdiction
17.1 The General Online Auction Terms and Conditions and the obligations ensuing therefrom are subject to Swiss law. The UN Convention on
Contracts for the International Sale of Goods (CISG) shall explicitly not apply.
17.2 The exclusive court of jurisdiction for all disputes arising in connection with the auction shall be the court of Zurich (Canton of Zurich). The
www.TroostwijkAuctions.com
General Terms and Conditions The General Terms and Conditions shall apply for disputes with the seller.
www.TroostwijkAuctions.com
About Troostwijk
Did you know?
­ we organise auctions in 25 countries
­ we have 1,6 million page views on a top day
1300 Auctions
Statistics
Troostwijk conducts
annually 1300 auction sales
all over Europe ­ Every year we deal with 50.000 bidders
­ from 95 different countries
­ over 500.000 registrations 15 Countries
85 Years
Troostwijk has
own offices
in 15 European countries
Troostwijk is conducting
auctions since 1930 and
has 85 years of experience
www.TroostwijkAuctions.com