ANALOG TO DIGITAL CONVERTERS / 9000 SERIES
9021 〉〉 STANDARD DEFINITION A/D ANALOG COMPOSITE, Y/C, COMPONENT TO 10-BIT SDI
The 9021 provides 10-bit analog-to-SDI conversion for NTSC and PAL
SD conversions. When used with an “-A/S” (split) rear module, the spacesaving design of the 9021 provides for high density, allowing two cards to be
collocated in the same frame space normally occupied by a single card. The
9021 accepts composite, Y/C and component YPbPr analog input signals
and provides an SMPTE 259M-C 270 Mbps SDI output. Differential inputs
are included for common mode noise rejection. A 4-, 3-, or 2-line comb or
notch filter is user-configurable for Y/C separation in composite mode. All
modes have 2X 8:4:4 input oversampling. An output jitter VCXO reduces 270
Mbps jitter down to 2 Hz. Full video proc control with user memory allows
adjustment of white level, black level, color gain, and color phase.
〉〉 FEATURES
Composite, component YPbPr and
Y/C inputs
Supports component BetaCam™,
MII™ and SMPTE/N10
Differential analog video inputs for
power hum rejection
Analog
Composite
Y/C or
Component
10-bit A to D and digital video path
Seven 270 Mbit SDI outputs
User selectable (on/off) 75Ω
termination
Internal color bar generator
Remote monitoring via DashBoard™ software or OGCP-9000
remote control panel
User proc. configuration control
Five year warranty
4 or 3-line adaptive comb
filter for composite mode
Differential Input,
Gain & Termination
Control
10-bit 4-line
Adaptive Decode
Format and Proc
Manual or automatic input
gain control
De-jitter
Bypass
Mux
Serialize
DA
SD - SDI
DA
SD - SDI
DA
SD - SDI
DA
SD - SDI
Pr/C
SDI OUT 1
Pb
SDI OUT 1
SDI OUT 1
SDI OUT 3
SDI OUT 4
SDI OUT 5
SDI OUT 6
RM20-9021-A
CARD 2
CARD 1
CMPST
CMPST
SDI OUT 1
SDI OUT 1
SDI OUT 2
SDI OUT 2
SDI OUT 3
SDI OUT 3
SDI OUT 4
SDI OUT 4
RM20-9021-A/S
Configuration
Switches
Microprocessor
DashBoard™/OGCP
Monitoring
Ethernet 10/100
(On Frame)
9021
CARD 2
7 watts
Input
SD Composite, Y/C or Component (YPbPr);
differential
SD-SDI Outputs-Outputs
Number of Outputs:
7
Standard: SMPTE 259M-C
Analog Gain
Auto or manual mode
Frequency Response
5 MHz +/- 0.25 dB
Output Jitter
< 0.14 UI measured with color bar input
SNR
> 52 dB
A/D Process
8:4:4 2X over sampled
Y/Cmpst IN
Pr/C IN
Pr/C IN
1 SDI OUT
Pb IN
Pb IN
2
2
3
Comb Filter
4, 3 or 2-line adaptive / non-adaptive
(user selectable)
CARD 1
Y/Cmpst IN
1 SDI OUT
〉〉 SPECIFICATIONS
Electrical
Power:
Y/CMPST
3
4
5
4
5
6
7
6
7
RM20-9021-B/S-DINHDBNC
〉〉 ORDERING INFORMATION
9021 Standard Definition A/D (Composite, Y/C,
or Component Input) to 10-bit SD-SDI
RM20-9021-A/S 20-Slot Frame Rear I/O Module
(Split) Dual Composite In, 4 SDI Outputs per card
RM20-9021-A 20-Slot Frame Rear I/O Module
(Standard Width) Composite, Component and Y/C
Inputs, 7 Converted SDI Outputs
RM20-9021-B/S-HDBNC 20-Slot Frame Rear I/O Module (Split, High Density) Composite, Component and Y/C
Inputs, 7 SDI Ouputs (per card; all connectors HD-BNC)
COBALTDIGITAL.COM
RM20-9021-B/S-DIN 20-Slot Frame Rear I/O Module
(Split, High Density) Composite, Component and Y/C Inputs, 7 SDI Ouputs (per card; all connectors DIN 1.0/2.3)
US SALES 800 669-1691 / DIRECT +1 217-344-1243 / [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. E. & O.E. ©2013 COBALT DIGITAL INC. 3/2013