Queen/King/California King
Best Bed Frame Assembly
Instructions
Parts Included
•
•
•
•
•
Bed Frame Rails - 4
Nylon Glides - 6
Sockets - 6
End Caps - 2
Center Rail - 2
•
•
•
•
Bolts - 8
Nuts - 8
Cross Rail - 2
Plug Locks - 4
Instructions
Step 1
Step 2
Overlap side rails and connect with bolt and
nut. Tighten with wrench. Repeat on other
side.
Slide leg covers on bed frame rails over inner
legs on cross rails.
Bed Frame Rail
Leg Cover
Cross Rail
Step 3
Find the keyholes on the cross arms needed for the appropriate size bed. See images below.
FOR QUEEN SIZE BEDS
FOR CALIFORNIA KING SIZE BEDS
See king size on next page.
Step 3 continued
FOR KING SIZE BEDS
Insert rivets on extender rail into selected keyholes. Slide arms away from each other to lock the
position. Then insert plug lock into keyhole at the end of the overlap. Repeat on the other side of
the bed.
Plug Lock
Step 4
Step 5
Position the center rails in the middle of the
bed frame. Overlap open ends of center rail
and attach with bolt and nut. Secure each
end of center rail to bed frame with bolt and
nut. Tighten with wrench. Center rail can be
used for all sizes.
Insert plastic socket into legs on cross rails.
Insert glides into plastic sockets.
◄
Leg Socket
Step 6
Slide end caps over the foot end of the side rails. The caps are designed so each one fits one side
rail, the right side or the left side.
www.bedframes.com
Copyright 2016 Bedframes.com
+1-844-866-2337
[email protected]