D690 Round Damper LOW-LEAKAGE, SINGLE-BLADE PRODUCT DATA Construction: Frame: Sleeve-type, spiral duct, crimped on downstream side. 6 to 10 in. (152 to 254 mm) diameter: 24 gage galvanized steel. 12 to 16 in. (305 to 406 mm) diameter: 22 gage galvanized steel. Sleeve length: Diameter plus 1 in. (25 mm), minimum length 12 in. (305 mm). Blade: 16 gage galvanized steel. Shaft: 1/2 in. (13 mm) diameter, zinc-coated steel. Extends 3.875 in. (153mm) beyond actuator mounting plate. Bearings: Flanged bronze oilite, pressed into frame. Seals: Closed-cell neoprene on frame with silicone rubber bead. Maximum Approach Velocity: 2500 ft/min (17.8 m/s), max. static pressure 4 in. wc. Damper Travel: 90 degrees. APPLICATION The D690 Round Damper is used in conventional air handling systems to control airflow in a round duct. The damper is specifically designed to mount to the Honeywell actuators. FEATURES • Neoprene and silicone seal for tight closing and low leakage. • Oilite bearings for long life. • 90-degree damper travel for a variety of applications. • Designed to mount to a variety of Honeywell actuators for an economical package. SPECIFICATIONS Models: Order D690 Damper model according to diameter. See Table 1. Dimensions: See Fig. 1. Finish: Mill galvanized. Pressure Drop: Max. at full open: 0.035 in. wc at 1000 ft/min (5 m/s). Leakage: 12.5 cfm per sq ft of Damper face at 1 in. wc. Refer to Table 2 for leakage at pressures other than 1 in. wc. Torque: Accommodates actuators of up to 44 lb-in. (5 Nm) of torque. Mounting Plate: 8.5 in. x 9 in. (width x length). Damper Opening: Rotate clockwise (cw) to open. Actuator Mounting: Attached plate for mounting Honeywell ML6161, ML6171, MN6105, MN7505, Zelix model series, Spyder MicroVAV Actuator. Temperature Range: 32°F to 130°F (0°C to 54°C). Shipping Weight: See Table 1. Accessories: 4074EVK Short Shaft Adapter Kit for use when damper shaft length is less than 1-3/8 in. (35 mm). Put Bar Code Here 63-2577-01 D690 ROUND DAMPER Table 1. D690 Diameters, Lengths and Shipping Weights. Diameter in in. (mm) Length in in. (mm) Shipping Weight in lb (kg) 6 (152) 12 (305) 3 (1.4) 8 (203) 12 (305) 4 (1.8) 10 (254) 12 (305) 5 (2.3) 12 (305) 13 (330) 6 (2.7) 14 (356) 15 (381) 8 (3.6) 16 (406) 17 (432) 10 (4.5) 2X 2-31/64 (63) 2X 1-15/16 (49) 9 (229) 4-17/64 (108) 2X 4-7/64 (104) 7X ø1/8 (3) Table 2. D690 Leakage Multipliers. Static Pressure in in. wc 1 cfm 12.5 2 17.625 3 21.625 4 25 2X 5-1/2 (140) 2X 5-55/64 (149) 5-13/64 (132) 8-1/2 (216) M33003 Fig. 2. D690 Actuator Mounting Plate Dimensions, in inches (mm). EXAMPLE: Leakage at 4 in. wc ( 2.00 × 12.5 ) = 25.0 cfm per sq ft 600 NOTE: The actuator can accommodate the optional field-installed auxiliary switches. 500 1.0" 400 SEALS FRAME CFM BLADE 0.5" 300 BEARINGS SHAFT 200 CONTROL ROD 100 0 6 TO 16 IN. (152 TO 406 MM) IN 2-IN. (51 MM) INCREMENTS 1/2 IN. (12 MM) 0 10 20 30 40 50 60 70 80 DAMPER POSITION IN DEGREES 90 M974 Fig. 3. 6-inch D690 flowrate vs. damper position. 3-7/8 in. (153 mm) M33002 900 Fig. 1. D690 Dimensions. 800 1.0" 700 600 CFM 500 0.5" 400 300 200 100 0 0 10 20 30 40 50 60 70 DAMPER POSITION IN DEGREES 80 90 M975 Fig. 4. 8-inch D690 flowrate vs. damper position. 63-2577—01 2 D690 ROUND DAMPER 1400 3000 1.0" 1200 1.0" 2500 1000 2000 0.5" CFM 800 CFM 0.5" 1500 600 1000 400 500 200 0 0 10 20 30 40 50 60 70 80 DAMPER POSITION IN DEGREES 0 90 0 10 20 30 40 50 60 70 DAMPER POSITION IN DEGREES M976 Fig. 5. 10-inch D690 flowrate vs. damper position, in inches (mm). 80 90 M979 Fig. 8. 16-inch D690 flowrate vs. damper position. 1800 1.0" 1600 1400 1200 0.5" 1000 CFM 800 600 400 200 0 0 10 20 30 40 50 60 70 80 DAMPER POSITION IN DEGREES 90 M977 Fig. 6. 12-inch D690 flowrate vs. damper position. M33004 Fig. 9. D690 w MN6105. 2500 1.0" 2000 1500 0.5" CFM 1000 500 0 0 10 20 30 40 50 60 70 DAMPER POSITION IN DEGREES 80 90 M978 Fig. 7. 14-inch D690 flowrate vs. damper position. 3 63-2577—01 D690 ROUND DAMPER M33063 M33005 Fig. 10. D690 w MS7505. Fig. 12. D690 w ML6161 M33006 Fig. 11. D690 w Spyder Micro VAV Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 customer.honeywell.com ® U.S. Registered Trademark © 2011 Honeywell International Inc. 63-2577—01 M.S. Rev. 08-11 Printed in United States
© Copyright 2024 Paperzz