B
B
B
INLETS TYPE B1 MODIFIED OR TYPE B2 MODIFIED SHALL BE OF SAME
4’
NOTE:
2’
A
CONSTRUCTION AND DIMENSIONS AS INLET, TYPE B MODIFIED EXCEPT
*
CLASS B CONCRETE SLAB
TO BE CONSTRUCTED IN
2 STAGES. TOP SURFACE OF
FERTILIZING, SEEDING &
STAGE 1 TO BE LEFT ROUGH.
STRAW MULCHING
FLOW
FLOW
4’
6" C TO C BOTH WAYS
A
GUTTER LINE
AS OTHERWISE INDICATED BELOW
FOUNDATION AND INVERT
#13 REINFORCEMENT STEEL
A
CLASS B CONCRETE SLAB
TOPSOILING 4" THICK
#13 REINFORCEMENT STEEL
R.
VA
6" C TO C BOTH WAYS
SHOULDER
FERTILIZING, SEEDING &
*
A
STRAW MULCHING
BICYCLE SAFE GRATE
AT LOW POINT INCREASE TO 4’
8"
B
AS SHOWN IN DETAIL
PLAN
CD-602-1.8
B
R.
VA
TOPSOILING 4" THICK
COVER - 1" MIN.
2" MAX.
NORMAL GUTTER LINE
CURB OR BERM
LADDER RUNGS
SHOULDER
SHOULDER
4’
SEE DETAIL
NORMAL SHOU
LDER SLOPE
8"
CD-602-1.3 & 1.5
2"
LADDER RUNGS
SEE DETAIL
COVER - 1" MINIMUM
3’-6"
2" MAXIMUM
CD-602-1.3
STAGE 2
2"
SECTION A-A
8"
STAGE 2
NORMAL GUTTER LINE
A
STAGE 1
BE 0.80 THE DIAMETER
B1 MODIFIED
4’-6"
2’-8"
OF THE MAIN PIPE
B2 MODIFIED
5’-6"
3’-8"
2"
THROUGH THE INLET.
SECTION B-B
FOUNDATION AND INVERT TO BE CONSTRUCTED IN TWO
MAX.
DIMENSION A DIMENSION B
2"
INLET TYPE
DEPTH OF INVERT TO
SECTION A-A
ADJUSTED GUTTER LINE
TOP OF CURB OR BE
RM
STAGE 1
MAX.
4’-0"
STAGES. TOP SURFACE OF STAGE 1 TO BE LEFT ROUGH.
SECTION B-B
INLETS, TYPE B1 MODIFIED
METHOD OF DEPRESSING INLETS AT SHOULDERS
AND TYPE B2 MODIFIED
INLET, TYPE B MODIFIED
CD-602-3.1
CD-602-3.2
CD-602-3.3
INLETS TYPE B1 OR TYPE B2 SHALL BE OF SAME CONSTRUCTION AND
B
9"
1
2
DIMENSIONS AS INLET TYPE B, EXCEPT AS OTHERWISE INDICATED BELOW.
CLASS B CONCRETE SLAB
#13 REINFORCEMENT STEEL
6" C TO C BOTH WAYS
A
1’-
IN DETAIL CD-602-1.8
8"
2’-4"
10"
\\Njdotprjws\v8system\NJDOTWS\Projects\NJDOTE
pen table=
GRATE AS SHOWN
1’-10"
A
BICYCLE SAFE
B
COVER - 1" MIN.
2" MAX.
9"
LADDER RUNGS
NOTE:
SEE DETAIL
CD-602-1.3 & 1.5
3"
REINFORCEMENT STEEL IS IN METRIC UNITS.
9"
18"
18"
9"
4’-6"
INLETS, TYPE B1, B2, &
30.000000:1.00000
2
STAGE 2
scale=
B
SECTION B-B
B, B1, & B2 MODIFIED
N.T.S.
4’-6"
3"
A
STAGE 1
CD-602-3
3"
NEW JERSEY DEPARTMENT OF TRANSPORTATION
1
4’-0"
INLET TYPE
DIMENSION A DIMENSION B
BDC07D-01-ORIGINAL SHEET
ID=
TPXBHAV
date=
17-DEC-2007 09:43
SECTION A-A
1
5"
3"
1
B1
4’-6"
1’-0"
B2
5’-6"
2’-0"
NOTE:
FOUNDATION AND INVERT TO BE CONSTRUCTED IN TWO
SEE GENERAL NOTE 10, CD-602-1.6
STAGES. TOP SURFACE OF STAGE 1 TO BE LEFT ROUGH.
CONSTRUCTION DETAILS
INLETS, TYPE B1 AND TYPE B2
FRAME TO BE USED FOR INLET, TYPE B MODIFIED
39
CD-602-3.4
file=
CD-602-3.5
146