PRODUCT DATA SHEET Ramén Ball Sector Valve Type KS-25 DN 25 l Wafer l PN 40 l Stainless steel l PTFE Seat l Viton® The Ramén Ball Sector Valve in DN 25 offers a versatile and robust control valve for any industrial application. It is available in four different executions and can be applied in chemical water, fibre abrasive or any other process to control small flows with very high control and rangeability. The Ramén Ball Sector Valve is a solution suited for industrial applications where process parameters are a low flow of liquid gas and steam needs to be controlled with high accuracy. Example of applications Automation options Dosing of chemicals Pneumatic actuator SR (Spring Return) Abrasive fluid control or DA (Double Acting) Industrial gases: Nitrogen (N2), Digital / Electro pneumatic/ oxygen (O2), natural gas, air Pneumatic positioner Electrical actuator Hydraulic actuator DN 25 is a small control valve for liquids, gases and low pressure steam Technical specifications Flangeless, wafertype Design DN 25 ½” Body EN 1.4432 AISI 316L Ball Sector EN 1.4435 Nominal sizes Material EN 1.4435 Shafts AISI 316L Viton® O-rings AISI 316L+Cr* Rulon® Bearing PN 40 (for flange PN 10/40 and ANSI 150/300/600) Nominal pressure -40° C - 170° C Operating temperature -40° F - 340° F Actuator torque [Nm] Recommended** Max. 20-50 100 Rangeability 300:1 Seat 1A 1B,1C,1E Options O-rings Alloy steels Seat Carbon reinforced PTFE Stellited Grade 6 EPDM, Nitril, Kalrez®, Viton GLT, EPDM 90 304, 254 SMO, Hastelloy, Duplex, Super Duplex White PTFE, PEEK, FDA Approved *Hard chromed ball sector **The lower value of the torque range can be used for on-off applications for clean media at normal temperatures. The higher value of the torque range shall be used for pneumatic actuators with positioner when high control accuracy is needed or for dirty/sticky media. www.ramenvalves.com Phone: +46 8 594 779 70 | [email protected] Fredsforsstigen 22-24 | SE-168 67 Bromma | Sweden 1 PRODUCT DATA SHEET Ramén Ball Sector Valve Type KS-25 DN 25 l Wafer l PN 40 l Stainless steel l PTFE Seat l Viton® J I H D G A B C F E Dimensions A [mm] B Bore [mm] 20 C [mm] D [mm] E [mm] See table ”Valve data” 35 80 F [mm] G [mm] H [mm] I [mm] 50 25 70 175 J [mm] 160 15 Weight [kg] Top mounting flange EN-ISO 5211 3,2 F05/07, D14* *D17 available on request Valve data Size 25/0,03 25/0,3 25/0,7 25/1,3 25/2,5 25/5 25/10 25/15 25/20 Kvs [m /h] 0,025 0,25 0,6 1,1 2,1 5 7,5 12,5 21 Cv 0,03 0,3 0,7 1,3 2,5 5,8 9 15 25 18-90° 18-90° 18-90° 18-90° 18-90° 30-90° 0-90° 25-90° 0-90° 15 19 3 Rotation angle Bore [mm] Triangle shaped groove Triangle shaped bore Characteristic Percentage characteristic Modified equal percentage Equal percentage About Ramén Valves Ramén manufactures the Ramén Ball Sector Valve in Sweden for throttling of liquids, gases, steam and slurries. The Ramén Ball Sector Valve has been installed in thousands of applications worldwide since 1968. The industrial design and the high performance throttling characteristics have been used within the pulp and paper, chemical and mining industry among others. The construction details and manufacturing techniques of Ramén are based on extensive and varied usage, often in harsh applications and environments. For bigger valve sizes refer to ”Data Sheet Ramén Ball Sector Valve KS-1”(A-B-E) www.ramenvalves.com Phone: +46 8 594 779 70 | [email protected] Fredsforsstigen 22-24 | SE-168 67 Bromma | Sweden 2
© Copyright 2024 Paperzz