Ambu® BlueSensor N ECG Electrode - Single use Key Benefits • Highly conductive wet gel • Superior adhesion • Comfortable foam backing • Unique offset connector • High-quality Ag/AgCl sensor • Available with preattached lead wire Ambu® BlueSensor N The very small Ambu BlueSensor N has been specially developed for children. It features highly conductive wet gel, offset connector and superior adhesion to ensure optimal signal during short- to medium-term applications. Thanks to the comfortable foam backing, the electrode is easy to use and gentle to the skin. The N electrode is also available with pre-attached lead wires. Wet gel Foam backing Specifications Connectors Dimensions Electrode size* (max. L x W or diameter in mm) Skin contact size (max. L x W or diameter in mm) Adhesive area (in mm2) Height excluding connector/wire (in mm) Sensor Sensor material Gel system Sensor area* (in mm2) Gel area/measuring area (in mm2) Electrical data (ANSI/AAMI) AC impedance - typical DC offset voltage - typical Defibrillation overload recovery - typical Rate of change of polarization potential - typical Combined offset instability and internal noise Bias current tolerance (over 8 hours) 44.8 x 22/30 x 22 30 x 20 556 1.6 Silver/silver chloride Wet gel 15/28 95 Environment PVC-free electrode Electrode not made with natural rubber latex PVC-free lead wire Wire not made with natural rubber latex PVC-free packaging X-Ray & MRI Radiolucent MR Conditional Shelf life Opened pouches Unopened pouches** No No Yes No No 1 month 24/12 months * non-wire/wire **from date of production 600 Ω 0.2 mV S = Stud A = 4 mm connector 8.5 mV 0.3 mV/s <15 μV <5 mV F = 3 mm connector Pre-wired connectors Materials Yes Silver/silver chloride Sensor (Ag/AgCl) Sponge Polyurethane foam (PUR) Polyvinyl chloride foam Outer carrier (PVC) Outer adhesive Acrylate Inner carrier (if any) Inner adhesive (if any) Polyvinyl chloride film Upper part (PVC) Fitting Polypropylene (PP) Connector (stud) Nickel-plated brass Lead wire core Copper Lead wire insulation Polyvinyl chloride Lead wire connector Brass/polypropylene (PP) Polyester/polyethylene Liner film (PET/PE) Packaging Pouches, inner layer Pouches, centre layer Pouches, outer layer Boxes Standard Packaging Quantity/liner Quantity/pouch Quantity/box Minimum sales Options Connectors Pre-wired Pre-wired connectors Precaution Single use only Polyethylene (PE) Aluminium (AI) Polyester (PET) Cardboard 1 25 500/1000, 1000/2000 1000/2000 S, A, F Yes A, F, K A = 4 mm connector F = 3 mm connector Available configurations* Quantity/pouch N-00-S, A, F N-10-A, F N-50-A, F, K N-00-S Product Wire length Connector Ambu A/S Baltorpbakken 13 DK - 2750 Ballerup Denmark Tel. +45 7225 2000 Fax +45 7225 2053 www.ambu.com 25 Quantity per inner/outer box 1000/2000 1000/2000 500/1000 K = 1.5 mm connector *some configurations may not be available worldwide US: Rx only 0086 493 1003 01 - V03 - 2013/04 - Ambu A/S. Technical data may be modified without further notice. Electrode Bio-compatible
© Copyright 2024 Paperzz