Case 4 PBX with FXO GW Configuration

Internet Telephony PBX
System
IPX-300/1900 Series
How to connect with Analog PBX via FXO Module
or FXS/FXO Gateway Configuration
www.planet.com.tw
Copyright © PLANET Technology Corporation. All rights reserved.
Please refer to the following descriptions and insert proper parameters
configurations into the device for establish the voice communications.
www.planet.com.tw
2 / 17
Installation Scenario:
1. Company A connect with CO line with FXS gateway
The local extension (# 600) could communicate with other company and
IP Phone via network.
2. Company B connect with Analog line with FXO gateway
The local extension (# 700) could communicate with other
company and IP Phone via network.
3. Company C connect with Analog line with FXO module of IPX-1900
The local extension (# 800) could communicate with other
company and IP Phone via network.
www.planet.com.tw
3 / 17
Select the [IP PBX Setup -> SIP Extension] of IPX-1900 to create the
extensions for IP Phone, FXO/FXS gateway.
1
www.planet.com.tw
4 / 17
Select the [IP PBX Setup -> FXO Trunk] of IPX-1900 to define
DID to IVR settings.
2
www.planet.com.tw
5 / 17
Select the [IP PBX Setup->Gateway Trunk] of IPX-1900 to create the
Gateway Trunk for the FXS/FXO gateway.
3
IP : 172.16.0.3 (FXO Gateway)
Port : 5060 (SIP Port)
Afterward click the Insert to add that
4
www.planet.com.tw
6 / 17
Select the [IP PBX Setup -> Trunk Group] of IPX-1900 to
add the Trunk Group
5
To add a Trunk Group for FXO module
Group Name : Company_C
Number : 90
Trunk Group : FXO_Port_1
FXO_Port_2
6
www.planet.com.tw
7 / 17
Select the [IP PBX Setup -> Dialing Rules] of IPX-1900 to
add the Dialing Rule for FXO Gateway
7
To add a Dialing Rules for FXO Gateway
Phone NO. : 92.
Delete Length : 0
Trunk Group : 172.16.0.2:5060
8
www.planet.com.tw
8 / 17
Select the [Hunt Group Setting] of IPX-1900 to add a
Hunt Group for FXS Gateway.
9
Create an Hunt Group :
Group Name : Company_A
Hunt Mode : Round Robin
Hunt Group Service Number : 91
Ring Timeout : 30
Ring Group : 201, 202, 203, 204
10
www.planet.com.tw
9 / 17
Select the [Save & Logout] of IPX-1900 to create a SIP
trunk which connect with Gateway
11
12
Click on the
button to save
previous modification and take effect, the
system will rebooting, please wait for 50 sec
www.planet.com.tw
10 / 17
Select the [Advance Setup ->VoIP Basic] of FXS
Gateway to setting port number configuration.
13
VoIP Basic Configuration:
Number :201, 202, 203, 204
Check Reg
Account: 201, 202, 203, 204
Password: 123
Use Public Account: Disable
14
www.planet.com.tw
11 / 17
15
SIP Proxy Setting:
Domain/Realm:
172.16.0.1
SIP Proxy Server:
172.16.0.1/5060
SIP Authentication :
Enable
About the IP address
please refer to previous
topology.
www.planet.com.tw
12 / 17
Select the [Advance Setup ->VoIP Basic] of FXO
Gateway to setting port number configuration.
16
VoIP Basic Configuration:
Number :301, 302, 303, 304
Check Reg
Account: 301, 302, 303, 304
Password: 123
Use Public Account: Disable
17
www.planet.com.tw
13 / 17
18
SIP Proxy Setting:
Domain/Realm:
172.16.0.1
SIP Proxy Server:
172.16.0.1/5060
SIP Authentication :
Enable
About the IP address
please refer to previous
topology.
www.planet.com.tw
14 / 17
Select the [Dialing Plan] of FXO Gateway to add the Dialing
Plan Number.
19
Incoming Dial Plan Settings:
Outgoing no: 92x
Length of Number: 3 ~ 6
Delete Length: 2
Prefix no.: None
Destination Telephone Port : 1,2,3,4
20
www.planet.com.tw
15 / 17
For example:
A. From Company A
1. To IP Phone: #600 dial #601~604, hear dial tone, dial 200
2. To Company B: #600 dial #601~604, hear dial tone, dial 92700
3. To Company C: #600 dial #601~604, hear dial tone, dial 90, hear dial tone, dial 800
B. From Company B
1. To IP Phone: #700 dial #701~704, hear dial tone, dial 200
2. To Company A: #700 dial #701~704, hear dial tone, dial 91 , hear dial tone, dial 600
3. To Company C: #700 dial #701~704, hear dial tone, dial 90, hear dial tone, dial 800
C. From Company C
1. To IP Phone: #800 dial #801~802, hear welcome prompt, dial 200
2. To Company A: #600 dial #801~802, hear welcome prompt, dial 91 , hear dial tone,
dial 600
3. To Company B: #600 dial #801~802, hear welcome prompt, dial 92700
C. From IP Phone
1. To Company A: IP Phone dial 91, hear dial tone, dial 600
2. To Company B: IP Phone dial 92700
3. To Company C: IP Phone dial 90, hear dial tone, dial 800
www.planet.com.tw
16 / 17
www.planet.com.tw