The “Keno” Range
CIRCULATION CLEANING :
PHO CID: Phosphoric acid “low” temperature hot wash
DM CID: Potassium hydroxide “low” temperature hot wash
KENOCID 2100: Peracetic acid based for final rinse and cluster flushing
PRE MILKING :
KENOPURE: Lactic acid based pre-milking teat treatment.
Spray,foam, dip or towel for complete cleaning, sanitizing and teat
conditioning.
POST MILKING:
KENOSTART: Premium conditioning post dip based on stable iodine.
Non acidic, high emollient for maximum teat conditioning.
KENOSTART SD (Sprayable version): Sprayable version. All the
benefits in a no block, high adherence formulation. May be dipped.
KENOCIDIN: Unique chlorhexidine digluconate film forming dip.
Contains Menthae Arvensis for healing and anti-inflammatory activity.
KENOCIDIN SD: (Sprayable version). All the benefits in a no block,
high adherence formulation. May be dipped.
DISINFECTANTS :
KENOCOX : Non phenolic disinfectant. Effective against
Cryptosporidium. Proceed with usual cleaning program. Then use a 2%
solution on all surfaces ie feeders, drinkers, floors, walls. Allow a contact
time of two hours.
Benefits of the “Keno” Teat Dips
All are Ready to use, non acidic formulations, so all the
emollients benefit the teat rather than buffer the product.
Contain highest levels (12%) of emollients (others 5% to 10%)
ensuring a rapid and consistent improvement in teat condition
Glycerine – Draw water on to the teat
Lanoline – Coats the teat and retains moisture
Sorbitol – Softens the teat, Allantoin – Aids healing of sores
Non drip film forming dips = less waste and less product used
KENOPURE has 3 actions:
- Cleaning. Ionic & non Ionic surfactants remove dirt fast.
- Sanitizing. Lactic acid gives a fast and gentle sanitizing action.
- Conditioning. High level of emollients condition and moisturise.
encouraging the release of oxytoxin that stimulates milk let down.
- Use in 3 ways too! Dip, spray or wipe.
KENOSTART:
Available as a spray or barrier dip formulation.
- A perfect teat protection thanks to the high and stable active iodine
concentration: 3000 ppm
- Contain highest levels (12%) of emollients (others 5% to 10%)
ensuring a rapid and consistent improvement in teat condition
- More active against bacteria causing mastitis: its activity is 5 time
better than recommended in European norms.
KENOCIDIN:
Available as a spray or barrier dip formulation.
- chlorhexidine digluconate : powerful all weather activity.
- menthae arvensis : brings healing and anti-inflammatory
properties for better cow comfort especially during wintertime.
- Contain highest levels (12%) of emollients (others 5% to 10%)
ensuring a rapid and consistent improvement in teat condition
CID LINES PRODUCTS RATES OF USE.
CIRCULATION CLEANING :
PHO CID: Phosphoric acid “low” temperature hot wash. 1L per 50L.
i.e 0.5% solution. Ensure water temperature >40’C for 10 minutes
DM CID: Potassium hydroxide “low” temperature hot wash. 1L per 50L.
i.e 0.5% solution. Ensure water temperature >40’C for 10 minutes
KENOCID 2100: Peracetic acid based for final rinse and cluster flushing.
0.25 to 0.5L per 50L. i.e 0.5 to 1.0% dilution. No residue, no need to rinse.
PRE MILKING :
KENOPURE: Lactic acid based pre-milking teat treatment.
Spray, foam, dip or towel for complete cleaning, sanitizing and teat conditioning.
 Foam cup dip: 400ml Kenopure plus 600ml water, ie 40% solution
 Spray: 100ml Kenopure plus 900ml water, ie. 10% solution
 Re-usable Cloth: 200ml in a 10L bucket of water, i.e. 2% solution
POST MILKING:
KENOSTART: Premium conditioning post dip based upon stable iodine.
Non acidic, high emollient for maximum teat conditioning. Ready to Use
KENOSTART SD (Sprayable version): Sprayable version. All the benefits in a no
block, high adherence formulation. May be dipped. RTU
KENOCIDIN: Unique chlorhexidine digluconate film forming dip.
Contains Menthae Arvensis for healing and anti-inflammatory activity. RTU
KENOCIDIN SD: (Sprayable version). All the benefits in a no block, high adherence
formulation. May be dipped. RTU
DISINFECTANTS :
KENOCOX : Non phenolic disinfectant. Effective against Cryptosporidium.
Proceed with usual cleaning program.
Then finally, use a 2% solution (0.2L Kenocox plus 9.8L water) on all surfaces ie
feeders, drinkers, floors, walls. Allow a contact time of two hours.