© RAMPF Tooling GmbH & Co. KG
RAMPF Tooling introduces new liquid products at Euromold 2007:
Preparations for the exhibition are in full swing
ZM - Rev.-Status: 01 – 2007/06/21
RAMPF Tooling is excited. For the second consecutive time the producer of
modeling materials based in Grafenberg will take part in Euromold. This year,
liquid materials should attract many visitors to the RAMPF Tooling stand.
Encouraged by the successful show last year, RAMPF Tooling’s product development team is busy working on new product innovations for Euromold 2007.
The specialist team would like to mark the occasion by presenting a new range
of liquid materials. These include gelcoat and casting systems with a reduced
hazard rating. They can be used for the production of pattern plates and core
boxes and they enable a large number of parts to be produced. Further highlights will be the new rapid prototyping casting systems for the production of
functional prototype parts and small series as well as a range of high temperature resistant laminating and gelcoat systems. A key feature of the laminating
systems is that they exhibit excellent wetting properties.
In addition boards for lay up tools and products for metal forming will be on display.
This year the tooling specialist has decided to have a more unpretentious exhibition concept. The core message will be RAMPF Tooling’s product variety which
is based on extensive know-how in the areas of mold and model making. Naturally, boards, close contour pastes and close contour castings will all be included
in the 2007 exhibition. The manufacturer has been active in the market for more
than 25 years. In January 2006 RAMPF Tooling was launched with its own distribution network. Besides a comprehensive service network in Germany and the
rest of Europe the Tooling products are also distributed through RAMPF companies in the USA and Japan.
Picture: The team of RAMPF Tooling is looking forward to the Euromold 2007:
Bernhard Deliege, Norbert Hess, Peter Kimmerle, Heinz Horbanski, Pat Celinski,
Michael Rampf, Matthias Rampf, Rudolf Rampf, Andrea Marchesini und Peter
Schwarz (seen from the left side).
page 1 of 2
© RAMPF Tooling GmbH & Co. KG
RAMPF Tooling introduces new liquid products at Euromold 2007:
Preparations for the exhibition are in full swing
ZM - Rev.-Status: 01 – 2007/06/21
Herausgeber:
RAMPF Tooling GmbH & Co.KG
Albstraße 37
D-72661 Grafenberg
T + 49 (0) 7123 9342-1600
F + 49 (0) 7123 9342-1666
E [email protected]
www.rampf-tooling.de
Seite 2 von 2
Ihr Ansprechpartner für Bildmaterial und weitere Informationen:
Ulrike Jäger
RAMPF Holding GmbH & Co.KG
Albstraße 37
D-72661 Grafenberg
T + 49 (0) 7123 9342-1041
F + 49 (0) 7123 9342-2041
E [email protected]