5 REASONS TO GET STARTED
WITH VIBRATION MONITORING
1.
2.
3.
4.
5.
Wireless monitoring is cost effective – installation
is faster and easier than with conventional wired
monitoring systems.
Wireless monitoring is automated – data collection
is performed automatically and transmitted back to the
office from even remote locations, keeping personnel
focused on higher value tasks.
Wireless monitoring is safe – intrinsically safe
transmitters can monitor equipment almost anywhere in
the plant, keeping personnel out of danger.
Wireless monitoring is actionable – Emerson’s AMS
9420 delivers more than other vibration transmitters
by providing conclusive, trendable information about
lubrication, pump cavitation, and the health of bearings
and gears.
Wireless monitoring is everywhere – with Emerson’s
innovative ARES Asset Management Platform, you can
monitor your assets from anywhere. Gets alerts on your
phone, decide what needs attention and even drill down
to diagnostics when necessary.
But what is the #1 reason to get started with wireless vibration
monitoring today? For a limited time, get the ARES Platform at
no charge with the purchase of ten AMS 9420 transmitters.
www.emerson.com/ams
Emerson's AMS brand of asset monitoring
and health analysis solutions helps you
proactively manage your assets to
improve reliability. This includes the
solutions previously known as CSI.
AMS 9420 Wireless Vibration Transmitter
The AMS 9420, like all of Emerson’s vibration monitoring products, goes beyond traditional monitoring for problems like imbalance,
misalignment or looseness to report on key health parameters such as under-lubrication, pump cavitation, bearing faults and
gear defects. It accomplishes this using Emerson’s unique PeakVue™ signal processing technique to listen for impacting inside
the machine. PeakVue is field-proven to provide actionable information to drive maintenance activities.
ARES Platform
The new ARES Platform, together with the AMS 9420, generates and publishes alerts on vibration, temperature and PeakVue data.
Using the Asset View phone app, alerts can be seen on the plant floor or almost anywhere. Go beyond the alert, as required,
to drill down to the diagnostic data. Back at the office, the ARES Platform offers special tools to get the job done fast:
„„Asset Explorer – Device configuration, diagnostics and maintenance
„„Asset View – Management and display of device alerts
„„AMS Machine Works – Display and analysis of vibration readings with a full set of advanced diagnostic functions
Special Offer
Through December 31, 2017 when you purchase ten AMS 9420 transmitters, you can receive Emerson’s ARES Platform for alert
management, diagnostics and reporting at no extra charge.
How to Order
Contact your local Emerson
representative and reference
P/N A48ARES-9420 to take
advantage of this special offer.
©2017, Emerson. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Machinery Health and
PeakVue are marks of one of the Emerson family of companies. All other marks are the property
of their respective owners.
Emerson
Reliability Solutions
835 Innovation Drive
Knoxville, TN 37932 USA
+1 865 675 2400
www.emerson.com/ams
The contents of this publication are presented for informational purposes only, and while every
effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their
use or applicability. All sales are governed by our terms and conditions, which are available on
request. We reserve the right to modify or improve the designs or specifications of our products
at any time without notice.