Rosemount TankRadar
Option for compliance with Exxon Mobile, H30
The Inert gas pressure Bridge Panel (IBP) enables the value and alarm status of
Rosemount TankRadar cargo pressure to be monitored at the bridge. The 10 inch
display can be integrated in existing level measurement system and mounted
where most convenient.
FEATURE HIGHLIGHTS
• 10.4’’ user friendly touch display
• Flush mounted
• Visual and audible alarm on the bridge
• Engineer / officer call system
• Marine type approval
EXTRACT FROM EXXON MOBILE REGULATION
“H.30 It is Strongly Preferred that vessels are fitted with a cargo tank pressure
monitor display and alarm unit on the bridge in addition to the display and alarm
unit installed in the cargo control room (H.29)”
HOW TO INSTALL
Pre-installation of Vapor pressure sensors is required for the IBP panel function. The kit consists of two major parts; IBP cabinet and the 10’’ monitor
which are connected to the existing I/O box in the TankRadar system.
Cabling between I/O box and cabinet / panel can be prepared by crew to save
time during commissioning installation.
CONTACT US
Please contact our Upgrade Team for further information and quotation.
[email protected]
Emerson Process Management
Rosemount Tank Radar AB
Box 130 45, SE-402 51 Göteborg, SWEDEN
T: +46 31 3370 000 F: +46 31 25 30 22
©Rosemount Tank Radar AB, Sweden, May 2013. Content subject to change without prior notice. The Emerson logo is a
trademark and service mark of Emerson Electric Co. The Rosemount trademark and lotogype are registered trademarks
of Rosemount Inc. All other marks are property of their respective owners.