Product Data Sheet
June 2015
SD 6703-2E04
Damcos Hand Pump - Electro-hydraulic
™
TM
Damcos™ Hand Pump - Electro-hydraulic
June 2015
General Description
The hand pump is always mounted with LPU or LPUM. HP-LPU
can be mounted directly or as bulkhead mounted. HP-LPUM can
be mounted directly on actuator only.
Note!
The very large actuators are not recommendable to be operated by standard handpump - ask for directions.
The handpump itself does not require any tank, but general tank
requirements for LPU must be fulfilled.
Application
Hand pump type
Range
HP-LPU BRC/F/KF (Direct)
BRC /F 125 - 8000 & KF 65 - 250
HP-LPU KC (Direct)
KC 65 - 400
HP-LPUM BRC/F/KF (Direct)
BRC/F 125 - 500
HP-LPUM KC (Direct)
KC 65 - 125
HP-LPU BRC/F/KF (BB)
BRC/F 125 - 8000 & KF 65 - 250
HP-LPU KC (BB)
KC 65 - 400
Please note that oil volume must be taken into consideration to determine the correct VPI gear ratio.
Direct and Bulkhead Mounted Handpump
Direct mounted hand pump.
2
Bulkhead mounted hand pump.
Damcos™ Hand Pump - Electro-hydraulic
June 2015
Main Data
Mounting
Prepared for actuator and bulkhead block interface
Maximum operation pressure
135 bar
Test pressure
225 bar
Maximum hand pump pressure
135 bar
Weight without oil
4.3 kg BRC/F KF version
5 kg KC version
Oil displacement per double stroke
8 cm3
Oil viscosity range
From 15 to 200 cSt
Temperature range
From -25 to 80 C
Recommended oil filtration
ISO Solid contaminant code 18/15 or NAS 160/10
o
o
Material
Housing / Cover
Brass
Spindle / Piston
Brass
Valves
Brass
Screws / Sign plate / Rivet
Stainless steel
Sealings
NBR (Acrylonitrile butadiene)
Bulkhead Installation Requirement
−− To gain maximum hand pump performance it is of significant
importance that the pipes between hand pump and actuator
are well de-aired.
−− Distance between hand pump and actuator must not exceed
80 m.
−− Bulkhead mounted hand pump can be with or without VPI.
−− Specific rules related to hand pump applications can be found
in related instructions.
3
Damcos™ Hand Pump - Electro-hydraulic
June 2015
Hydraulic Diagram for Direct Mounted LPU Handpump
Note!
Manually operated valves
have the possibility of
closing the connection
to LPU. For LPU-S this will
always be required for
hand pump operation as
open solenoid valve else
would force actuator into
fail safe position.
Hydraulic Diagram for Bulkhead Mounted LPU Handpump
Note!
Manually operated valves
have the possibility of
closing the connection
to LPU. For LPU-S this will
always be required for
hand pump operation as
open solenoid valve else
would force actuator into
fail safe position.
4
Damcos™ Hand Pump - Electro-hydraulic
June 2015
Dimensions for Handpump
HP-LPU shown on BRCF 500
controlled by LPU-S
HP-LPU shown on KC 125
controlled by LPUM-D
118
Approx 316-375
Approx 260 mm movement of handle
70 extra for
KC-actuators
50 extra for
non-KC-actuators
Additional weight: 4,2 kg for non-KC actuators, 5 kg for KC-actuators
5
Damcos™ Hand Pump - Electro-hydraulic
SD 6703-2E04
Product Data Sheet
August 2013
©2015 Emerson Process Management. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Damcos and the
Damcos logotype are trademarks of Damcos A/S. All other marks are the property of their
respective owners.
Emerson Process Management
Damcos A/S
Aaderupvej 41
DK-4700 Naestved
T +45 5578 7200
F +45 5578 7272
www.EmersonProcess.com/mtm
TM
The contents of this publication are presented for information purposes only, and while effort has
been made to ensure their accuracy, they are not to be construed as warranties or guarantees,
expressed or implied, regarding the products or services described herein or their use or
applicability. Standard Terms and Conditions of Sale can be issued by contacting Damcos A/S.
We reserve the right to modify or improve the designs and specifications of our products at any
time without notice. Damcos A/S accepts no responsibility for any errors that may appear in this
publication.