Product Data Sheet
February 2015
SD 6701-2E06
Damcos Hand Pump - Direct Mounted
™
TM
Damcos™ Hand Pump - Direct Mounted
February 2015
General Description
The direct mounted hand pump is installed directly on single
and double line actuators i.e. no extra pipe or block installation is required. The direct mounted hand pump is mainly
together with valves which are easy to access. For the main
part of the double line actuators an additional tank is not
needed, but for the biggest an additional tank must be added
to compensate for the oil compression and decompression.
For the single line actuators an additional tank must always
be added to operate the valve. A larger tank is also needed
for the biggest single line actuators due to oil compression
and decompression.
Note!
The very large actuators are not recommendable to be operated by standard handpump - ask for directions.
Application
Hand pump type
Range
HP-D
BRC 125 - 2000 & KC 85 - 125
HP-D-1
BRC 4000 - 8000 & KC 250 - 400
HP-S-1
BRCF 125 - 2000
HP-S-4
BRCF 4000
Please note that a KFR must be used instead of a KF actuator with a direct mounted hand pump.
Direct Mounted Hand Pump for HP-D, BRC 500, HP-S-1
and BRCF 500
HP-D and BRC 500
2
HP-S-1 and BRCF 500
February 2015
Damcos™ Hand Pump - Direct Mounted
Hydraulic Diagram for HP-D-1
1.
Double line actuator
2.
Bypass valve
3.
Double pilot operated check
valve
4.
Relief valve
5.
Throttle valve
6.
Filter
7.
Remote connection line B
(OPEN)
8.
Remote connection line A
(CLOSE)
9.
Stop valve
10.
Direction valve
11.
Hand pump handle
12.
Tank
Dimension for HP-D-1
3
Damcos™ Hand Pump - Direct Mounted
February 2015
Hydraulic Diagram for HP-S-1/-4
1.
Single line actuator
2.
Bypass valve
3a. Stop valve (2)
5a. Stop valve (1)
6.
Filter
7.
Remote connection line B
(OPEN)
11. Hand pump handle
12. Tank
Dimensions for HP-S-1/-4
4
February 2015
Damcos™ Hand Pump - Direct Mounted
5
Damcos™ Hand Pump - Direct Mounted
SD 6701-2E06
Product Data Sheet
February 2015
©2015 Emerson Process Management. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Damcos and the
Damcos logotype are trademarks of Damcos A/S. All other marks are the property of their
respective owners.
Emerson Process Management
Damcos A/S
Aaderupvej 41
DK-4700 Naestved
T +45 5578 7200
F +45 5578 7272
www.EmersonProcess.com/mtm
TM
The contents of this publication are presented for information purposes only, and while effort has
been made to ensure their accuracy, they are not to be construed as warranties or guarantees,
expressed or implied, regarding the products or services described herein or their use or
applicability. Standard Terms and Conditions of Sale can be issued by contacting Damcos A/S.
We reserve the right to modify or improve the designs and specifications of our products at any
time without notice. Damcos A/S accepts no responsibility for any errors that may appear in this
publication.