BETTIS RPE-Series
Product Data Sheet
November 2015
BED.06.0000 Rev. 2
Rack and Pinion Pneumatic Actuators (Metric - DIN3337)
„„High quality and economical actuator
„„Improve plant and operator safety
„„Reliable and flexible in process control
„„Increase serviceability
Product Data Sheet
Bettis RPE-series
BED.06.0000 Rev. 2
November 2015
Table of Contents
Section 1: General Information, Torque and Dimensions
Data sheet RPE 25 (Metric DIN 3337)............................................................................................. 4
Data sheet RPE 40 (Metric DIN 3337)............................................................................................. 5
Data sheet RPE 65 (Metric DIN 3337)............................................................................................. 6
Data sheet RPE 100 (Metric DIN 3337)........................................................................................... 7
Data sheet RPE 150 (Metric DIN 3337)........................................................................................... 8
Data sheet RPE 200 (Metric DIN 3337)........................................................................................... 9
Data sheet RPE 350 (Metric DIN 3337)......................................................................................... 10
Data sheet RPE 600 (Metric DIN 3337)......................................................................................... 11
3
Bettis RPE-series
Product Data Sheet
June 2014
BED.06.0025.EN Rev. 0
Data sheet RPE 25
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
B3
C2
C1
C3
øD5
øD1
E1
4x M5
x8
D10
+0.02
0
øE2
4x D2
4x D6
Dim in mm.
A1
A2
166
166
B1
B2
43
94
D1
D2
50 M6x10
M6
x 12
D9
A3
91
B3
80
D3
35
B1
30
A4
119
C1
16
D1 '
36
A5
82
C2
23
D2 '
M5x8
RPE 25
A6
49
C3
14
D3 '
-
A7
30
C4
20
D9
50
B2
A8
48
C5
12
D10
48
E1 Max.
11.08
E1 Min.
11.00
E2
14.10
Principle
Pneumatic rack & pinion actuator
General data
Bore
56 mm
Stroke
15.7 mm
SR
1.3 kg.
Weight
DA
1.7 kg.
Port A
0.11 L
Volume
Port B
0.19 L
Air connection
2x 1/4" BSP
MOP
8 barg
Pressure range
SR
3-8 barg
DA
0.2 - 8 barg
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
0.5 sec
Cycle speed DA2
Close
0.4 sec
Open
0.5 sec
2
Cycle speed SR
Close
0.4 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 25)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
Start End Start End Start End Start End Start End Start End Start End
10
4
2
12
10
14
13
17
15
19
17
21
20
24
22
20
7
4
9
6
12
9
14
11
16
13
19
16
21
18
30
11
7
7
2
9
4
11
7
14
9
16
12
19
14
40
14
9
9
3
11
5
14
8
16
10
50
18
11
9
1
11
4
14
6
60
21
13
11
2
Double-Acting
13
16
18
20
23
25
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
4
6.0 barg
Start End
26
25
24
21
21
17
18
12
16
8
13
4
27
7.0 barg
Start End
31
29
28
25
26
21
23
17
21
13
18
9
32
8.0 barg
Start End
36
34
33
30
31
26
28
22
26
18
23
14
36
„„PED : suitable for use with group 2 gases according to Pressure
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BED.06.0040.EN Rev. 0
June 2014
Data sheet RPE 40
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
E1
B3
C2
C1
C3
øD5
øD1
4x M5
x8
D10
+0.02
øE2 0
4x D2
4x D6
Dim in mm.
A1
A2
192
192
B1
B2
45
94
D1
D2
50 M6x10
M6
x 12
D9
A3
112
B3
80
D3
35
B1
30
A4
139
C1
22
D1 '
70
RPE 40
A5
A6
95
55
C2
C3
30
14
D2 '
D3 '
M8x13 40
A7
34
C4
20
D9
68
B2
A8
58
C5
12
D10
65
E1 Max.
14.08
E1 Min.
14.00
E2
18.10
Principle
Pneumatic rack & pinion actuator
General data
Bore
70 mm
Stroke
18.8 mm
SR
2.4 kg.
Weight
DA
1.8 kg.
Port A
0.16 L
Volume
Port B
0.36 L
Air connection
2x 1/4" BSP
MOP
8 bar
Pressure range
SR
3-8 bar
DA
0.2 - 8 bar
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
0.6 sec
Cycle speed DA2
Close
0.5 sec
Open
0.6 sec
2
Cycle speed SR
Close
0.5 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 40)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
6.0 barg
7.0 barg
8.0 barg
Start End Start End Start End Start End Start End Start End Start End Start End Start End Start End
10
7
4
22
19
26
24
31
28
36
33
40
37
45
42
49
46
58
55
67
64
20
13
8
17
12
22
16
26
21
31
25
35
30
40
34
44
39
53
48
62
57
30
20
12
12
4
17
9
21
13
26
18
31
22
35
27
40
31
49
40
58
49
40
26
17
12
1
17
6
21
10
26
15
30
19
35
24
44
33
53
42
50
33
21
17
3
21
7
26
12
30
16
39
25
48
34
60
39
25
21
4
25
9
34
18
43
27
Double-Acting
25
29
34
38
42
47
51
59
68
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„PED : suitable for use with group 2 gases according to Pressure
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
5
Bettis RPE-series
Product Data Sheet
June 2014
BED.06.0065.EN Rev. 0
Data sheet RPE 65
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
E1
B3
C2
C1
C3
øD5
øD1
4x M5
x8
D10
+0.02
øE2 0
4x D2
4x D6
Dim in mm.
A1
A2
217
217
B1
B2
50
94
D1
D2
50 M6x10
M6
x 12
D9
A3
124
B3
80
D3
35
B1
30
A4
151
C1
22
D1 '
70
RPE 65
A5
A6
104
58
C2
C3
30
14
D2 '
D3 '
M8x13 40
A7
38
C4
20
D9
68
B2
A8
69
C5
12
D10
65
E1 Max.
14.08
E1 Min.
14.00
E2
18.10
Principle
Pneumatic rack & pinion actuator
General data
Bore
80 mm
Stroke
22 mm
SR
3.6 kg.
Weight
DA
2.4 kg.
Port A
0.36 L
Volume
Port B
0.55 L
Air connection
2x 1/4" BSP
MOP
8 bar
Pressure range
SR
3-8 bar
DA
0.2 - 8 bar
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
0.7 sec
Cycle speed DA2
Close
0.5 sec
Open
0.6 sec
2
Cycle speed SR
Close
0.6 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 65)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
Start End Start End Start End Start End Start End Start End Start End
10
10
6
33
29
40
36
47
43
54
50
61
57
68
63
20
20
13
26
17
33
24
40
31
47
38
53
45
60
52
30
31
19
19
5
25
12
32
19
39
26
46
33
53
40
40
41
26
25
8
32
14
39
21
46
28
50
51
32
24
3
31
10
38
17
60
61
39
31
5
Double-Acting
38
45
51
58
64
71
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
6
6.0 barg
Start End
75
70
67
59
60
47
52
35
45
23
38
12
77
7.0 barg
Start End
88
84
81
72
74
61
66
49
59
37
52
25
90
8.0 barg
Start End
102
98
95
86
87
74
80
63
73
51
65
39
104
„„PED : suitable for use with group 2 gases according to Pressure
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BED.06.0100.EN Rev. 0
June 2014
Data sheet RPE 100
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
E1
B3
C2
C1
C3
øD5
øD1
4x M5
x8
D10
+0.02
øE2 0
4x D2
4x D6
Dim in mm.
A1
A2
247
247
B1
B2
60
97
D1
D2
70 M8x13
M6
x 12
D9
A3
131
B3
80
D3
55
B1
30
A4
158
C1
22
D1 '
50
RPE 100
A5
A6
115
64
C2
C3
35
14
D2 '
D3 '
M6x10 32
A7
38
C4
20
D9
66
B2
A8
69
C5
12
D10
63
E1 Max.
17.08
E1 Min.
17.00
E2
25.20
Principle
Pneumatic rack & pinion actuator
General data
Bore
91 mm
Stroke
25.1 mm
SR
4.6 kg.
Weight
DA
3.1 kg.
Port A
0.36 L
Volume
Port B
0.82 L
Air connection
2x 1/4" BSP
MOP
8 bar
Pressure range
SR
3-8 bar
DA
0.2 - 8 bar
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
0.8 sec
Cycle speed DA2
Close
0.6 sec
Open
0.8 sec
2
Cycle speed SR
Close
0.7 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 100)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
Start End Start End Start End Start End Start End Start End Start End
10
15
9
49
43
60
53
70
64
80
74
90
84
100
94
20
30
19
39
26
49
36
59
47
69
57
79
67
90
77
30
44
28
28
9
38
19
48
30
59
40
69
50
79
60
40
59
37
27
2
38
13
48
23
58
33
68
43
50
74
47
37
6
47
16
57
26
60
89
56
47
9
Double-Acting
57
66
76
86
95
105
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
6.0 barg
Start End
111 104
100
87
89
70
78
53
68
36
57
19
115
7.0 barg
Start End
131 125
120 108
109
91
99
74
88
57
77
40
134
8.0 barg
Start End
151 145
141 128
130 111
119
94
108
77
98
60
153
„„PED : suitable for use with group 2 gases according to Pressure
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
7
Bettis RPE-series
Product Data Sheet
June 2014
BED.06.0150.EN Rev. 0
Data sheet RPE 150
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
B3
C2
C1
C3
øD5
øD1
E1
4x M5
x8
D10
+0.02
øE2 0
4x D2
4x D6
Dim in mm.
A1
A2
304
235
B1
B2
M6
x 12
D9
A3
157
B3
B1
30
A4
185
C1
A5
127
C2
RPE 150
A6
69
C3
B2
A7
49
C4
A8
75
C5
75
94
80
34
45
19
20
12
D1
70
D2
M8x13
D3
55
D1 '
102
D2 '
D3 '
D9
D10
E1 Max.
17.08
E1 Min.
17.00
E2
M10x15
54
97
92
25.50
Principle
Pneumatic rack & pinion actuator
General data
Bore
103 mm
Stroke
31.4 mm
SR
6.9 kg.
Weight
DA
4.8 kg.
Port A
0.78 L
Volume
Port B
0.71 L
Air connection
2x 1/4" BSP
MOP
8 bar
Pressure range
SR
3-8 bar
DA
0.2 - 8 bar
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
1.0 sec
Cycle speed DA2
Close
0.8 sec
Open
0.9 sec
2
Cycle speed SR
Close
0.8 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Stroke
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 150)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
Start End Start End Start End Start End Start End Start End Start End
10
24
15
79
69
96
86
112 102 128 118 145 135 161 151
20
47
30
62
42
79
59
95
75
111
91
128 108 144 124
30
71
44
45
15
62
32
78
48
94
64
111
81
127
97
40
94
59
45
5
61
21
77
37
94
54
110
70
50 118
74
60
10
77
26
93
43
60 141
89
76
16
Double-Acting
91
106
122
137
153
168
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
8
6.0 barg
Start End
177 167
160 140
143 113
126
86
109
59
92
32
183
7.0 barg
Start End
210 200
193 173
176 146
159 119
142
92
125
65
214
8.0 barg
Start End
243 233
226 206
209 179
192 152
175 124
158
97
245
„„PED : suitable for use with group 2 gases according to Pressure
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BED.06.0200.EN Rev. 0
June 2014
Data sheet RPE 200
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
B3
C2
C1
C3
øD5
øD1
E1
4x M5
x8
D10
+0.02
øE2 0
4x D2
4x D6
M6
x 12
D9
Dim in mm.
A1
A2
B1
30
B1
B2
B3
C1
C2
C3
C4
C5
75
94
80
36
45
19
20
12
D1
D2
D3
D1 '
D2 '
D3 '
D9
D10
70
70
M8x13
50
94
90
28.20
265
102 M10x15
A3
A4
A5
191
134
RPE 200
A6
A7
E1 Max.
22.10
E1 Min.
22.00
E2
362
163
B2
72
49
A8
87
Principle
Pneumatic rack & pinion actuator
General data
Bore
110 mm
Stroke
37.7 mm
SR
9.7 kg.
Weight
DA
5.8 kg.
Port A
0.82 L
Volume
Port B
0.97 L
Air connection
2x 1/4" BSP
MOP
8 bar
Pressure range
SR
3-8 bar
DA
0.2 - 8 bar
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
1.3 sec
Cycle speed DA2
Close
0.9 sec
Open
1.0 sec
2
Cycle speed SR
Close
1.0 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 200)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
Start End Start End Start End Start End Start End Start End Start End
10
33
21
108
94
131 117 153 139 175 161 198 184 220 206
20
65
41
85
57
107
79
129 102 152 124 174 146 196 169
30
98
62
61
19
83
42
106
64
128
86
150 109 173 131
40 131
82
82
26
104
49
127
71
149
93
50 163 103
81
11
103
34
125
56
60 196 124
102
18
Double-Acting
124
146
167
188
209
230
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
6.0 barg
Start End
242 228
219 191
195 153
171 116
148
78
124
41
251
7.0 barg
Start End
287 273
263 236
240 198
216 161
192 123
169
85
293
8.0 barg
Start End
332 318
308 280
284 243
261 205
237 168
213 130
335
„„PED : suitable for use with group 2 gases according to Pressure
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
9
Bettis RPE-series
Product Data Sheet
June 2014
BED.06.0350.EN Rev. 0
Data sheet RPE 350
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
B3
C2
C1
C3
øD5
øD1
E1
4x M5
x8
D10
+0.02
øE2 0
4x D2
4x D6
M6
x 12
D9
Dim in mm.
A1
A2
B1
30
B1
B2
B3
C1
C2
C3
C4
C5
85
100
80
36
45
19
20
12
D1
D2
D3
D1 '
D2 '
D3 '
D9
D10
70
70
M8x13
50
94
94
36.20
284
102 M10x15
A3
A4
A5
230
165
RPE 350
A6
A7
E1 Max.
22.10
E1 Min.
22.00
E2
385
201
B2
85
42
A8
109
Principle
Pneumatic rack & pinion actuator
General data
Bore
145 mm
Stroke
37.7 mm
SR
16.9 kg.
Weight
DA
10.4 kg.
Port A
1.94 L
Volume
Port B
1.68 L
Air connection
2x 1/4" BSP
MOP
8 bar
Pressure range
SR
3-8 bar
DA
0.2 - 8 bar
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
1.9 sec
Cycle speed DA2
Close
1.3 sec
Open
1.4 sec
2
Cycle speed SR
Close
1.5 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 350)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
Start End Start End Start End Start End Start End Start End Start End
10
56
35
189 165 227 204 266 243 305 281 344 320 383 359
20 112
70
148 101 187 139 226 178 265 217 303 256 342 295
30 168 106 108
36
146
75
185 114 224 153 263 192 302 231
40 224 141
106
11
145
50
184
89
222 127 261 166
50 280 176
143
24
182
63
221 102
60 335 211
180
38
Double-Acting
216
253
290
326
363
400
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
10
6.0 barg
Start End
422 398
381 334
341 269
300 205
260 141
219
77
436
7.0 barg
Start End
499 476
459 411
418 347
378 283
337 218
297 154
510
8.0 barg
Start End
577 553
537 489
496 425
455 360
415 296
374 232
583
„„PED : suitable for use with group 2 gases according to Pressure
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BED.06.0600.EN Rev. 0
June 2014
Data sheet RPE 600
Metric - DIN3337
4
2x
1/4” BSP
A8
C5
4
C4
A4
A3
A7
E8
D3(D7)
A5
2
A6
A2 (DA)
A1 (SR)
B3
C2
C1
C3
øD5
øD1
E1
4x M5
x8
D10
+0.02
øE2 0
4x D2
4x D6
M6
x 12
D9
Dim in mm.
A1
A2
B1
30
B2
RPE 600
A6
A7
B1
B2
B3
C1
C2
C3
C4
98
148
130
55
65
-/-
30
-/-
D1
D2
D3
D1 '
D2 '
D3 '
D9
D10
E1 Max.
27.11
E1 Min.
27.00
E2
85
102 M10x15
-/-
118
113
36.20
476
356
125 M12x18
A3
A4
A5
248
292
199
102
A8
67
132
C5
Principle
Pneumatic rack & pinion actuator
General data
Bore
175 mm
Stroke
44 mm
SR
27.6 kg.
Weight
DA
19.4 kg.
Port A
3.10 L
Volume
Port B
2.86 L
Air connection
2x 1/4" BSP
MOP
8 bar
Pressure range
SR
3-8 bar
DA
0.2 - 8 bar
Clean, dry or lubricated air or
Pressure media
inert gas.
Open
3.2 sec
Cycle speed DA2
Close
1.9 sec
Open
2.2 sec
2
Cycle speed SR
Close
2.2 sec
Temperature range
-20°C to +80°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Finish
Polyurethane powder coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 0.6 m3/hr
Pipe diameter: 6 mm
Medium: clean air
Supply pressure: 5.5 barg ≈ 80 psig
Load: with average load
Stroke: 90°
Temperature: Room temperature
Spring set
nr.
1. Optional F03 drilling pattern without center plate (no optional center plate available for size 600)
Torque output (Nm)
Spring-Return
Spring
Air Torque (Nm)
Stroke
SUPPLY PRESSURE
Torque
(Nm)
3.0 barg
3.5 barg
4.0 barg
4.5 barg
5.0 barg
5.5 barg
Start End Start End Start End Start End Start End Start End Start End
10
96
60
320 279 386 345 452 411 518 477 584 543 650 609
20 192 121 251 169 317 235 383 301 449 367 515 433 581 499
30 287 181 181
59
247 125 313 191 379 257 445 323 511 389
40 383 241
178
15
244
81
310 147 376 213 442 279
50 479 302
241
37
307 103 373 169
60 575 362
303
59
Double-Acting
368
430
492
554
617
679
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
6.0 barg
Start End
716 675
647 565
577 455
508 345
439 235
369 125
741
7.0 barg
Start End
848 807
779 697
709 587
640 477
571 367
501 257
866
8.0 barg
Start End
980 939
911 829
841 719
772 609
703 499
633 389
991
„„PED : suitable for use with group 2 gases according to Pressure
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
11
World Area Configuration Centers (WACC) offer sales support,
service, inventory and commissioning to our global customers.
Choose the WACC or sales office nearest you:
NORTH & SOUTH AMERICA
MIDDLE EAST & AFRICA
19200 Northwest Freeway
Houston, TX 77065
T +1 281 477 4100
F +1 281 477 2809
P. O. Box 17033
Dubai
United Arab Emirates
T +971 4 811 8100
F +971 4 886 5465
Av. Hollingsworth,
325, Iporanga Sorocaba,
SP 18087-105
Brazil
T +55 15 3238 3788
F +55 15 3228 3300
ASIA PACIFIC
No. 9 Gul Road
#01-02 Singapore 629361
T +65 6501 4600
F +65 6268 0028
No.1 Lai Yuan Road
Wuqing Development Area
Tianjin 301700
P.R.China
T +86 22 8212 3300
F +86 22 8212 3308
P. O. Box 10305
Jubail 31961
Saudi Arabia
T +966 3 340 8650
F +966 3 340 8790
24 Angus Crescent
Longmeadow Business Estate
East P.O. Box 6908; Greenstone;
1616 Modderfontein, Extension 5
South Africa
T +27 11 451 3700
F +27 11 451 3800
EUROPE
Berenyi u. 72- 100
Videoton Industry Park
Building #230
Székesfehérvár 8000
Hungary
T +36 22 53 09 50
F +36 22 54 37 00
For complete list of sales and manufacturing sites, please visit
www.emerson.com/actuationtechnologieslocations
Or contact us at [email protected]
www.emerson.com/bettis
All Rights Reserved.
We reserve the right to modify or improve the designs or specifications of the products mentioned in this manual at any time without
notice. Emerson does not assume responsibility for the selection, use
or maintenance of any product. Responsibility for proper selection,
use and maintenance of any Emerson product remains solely with the
purchaser.
©2015 Emerson Electric Co.