BETTIS RPE-Series
Product Data Sheet
November 2015
BEI.06.0000 Rev. 2
Rack and Pinion Pneumatic Actuators (Imperial - ISO5211)
„„High quality and economical actuator
„„Improve plant and operator safety
„„Reliable and flexible in process control
„„Increase serviceability
Product Data Sheet
Bettis RPE-series
BEI.06.0000 Rev. 2
November 2015
Table of Contents
Section 1: General Information, Torque and Dimensions
Data sheet RPE 25 (Imperial ISO 5211)........................................................................................... 4
Data sheet RPE 40 (Imperial ISO 5211)........................................................................................... 5
Data sheet RPE 65 (Imperial ISO 5211)........................................................................................... 6
Data sheet RPE 100 (Imperial ISO 5211)......................................................................................... 7
Data sheet RPE 150 (Imperial ISO 5211)......................................................................................... 8
Data sheet RPE 200 (Imperial ISO 5211)......................................................................................... 9
Data sheet RPE 350 (Imperial ISO 5211)....................................................................................... 10
Data sheet RPE 600 (Imperial ISO 5211)....................................................................................... 11
3
Bettis RPE-series
Product Data Sheet
June 2014
BEI.06.0025.EN Rev. 0
Data sheet RPE 25
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
6.54
6.54
B1
B2
1.69
3.7
D1
D2
1.969 1/4"-20 x 0.39
B1
30
A3
3.59
B3
3.15
D3
1.417
A4
4.69
C1
0.63
D4
10-24 x 0.31
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
40 psig
Set
Start End Start End
10
31
20
93
80
20
63
39
70
44
30
94
59
48
8
40
125
79
50
156
99
60
188
118
Double-Acting
109
B2
RPE 25
A5
A6
A7
A8 E1 Max.
3.23 1.91 1.16 1.89 0.436
C2
C3
C4
C5 E1 Min.
0.91 0.55 0.79 0.47 0.433
D5
D6
E2
1.97 1.89
0.555
50 psig
Start End
123
109
100
73
77
37
137
60 psig
Start End
152
139
129
103
107
67
84
31
165
Principle
Pneumatic rack & pinion actuator
General data
Bore
2.205
Stroke
0.618
SR
2.9
Weight
DA
3.7
Port A
6
Volume
Port B
12
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
0.5
Cycle speed DA2
Close
0.4
Open
0.5
2
Cycle speed SR
Close
0.4
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
181
168
211
198
159
132
188
162
136
96
166
126
113
60
143
90
91
24
120
54
98
18
193
220
90 psig
Start End
240
227
218
191
195
155
172
119
150
83
127
47
248
100 psig
Start End
270
257
247
221
225
185
202
149
179
113
157
77
276
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
317
304
294
268
272
232
249
196
226
160
204
124
321
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„PED : suitable for use with group 2 gases according to Pressure
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
4
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BEI.06.0040.EN Rev. 0
June 2014
Data sheet RPE 40
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
7.55
7.55
B1
B2
1.77
3.7
D1
D2
2.756 5/16"-18 x 0.39
B1
30
A3
A4
4.39
5.47
B3
C1
3.15
0.87
D3
D4
1.969 1/4"-20 x 0.39
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
40 psig
Set
Start End Start End
10
58
37
175
150
20
116
73
133
84
30
174
110
91
18
40
231
146
50
289
183
60
347
220
Double-Acting
205
B2
RPE 40
A5
A6
A7
A8 E1 Max.
3.74 2.15 1.34 2.28 0.554
C2
C3
C4
C5 E1 Min.
1.18 0.55 0.79 0.47 0.551
D5
D6
E2
2.68 2.56
0.713
50 psig
Start End
230
206
188
139
146
73
257
60 psig
Start End
285
261
243
195
201
128
159
62
309
Principle
Pneumatic rack & pinion actuator
General data
Bore
2.756
Stroke
0.74
SR
5.3
Weight
DA
4
Port A
10
Volume
Port B
22
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
0.6
Cycle speed DA2
Close
0.5
Open
0.6
2
Cycle speed SR
Close
0.5
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
341
316
396
371
299
250
354
305
257
183
312
239
214
117
270
172
172
50
228
106
186
39
361
413
90 psig
Start End
451
427
409
360
367
294
325
227
283
161
241
94
466
100 psig
Start End
506
482
464
415
422
349
380
283
338
216
296
150
518
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
595
570
553
504
511
437
469
371
427
304
385
238
601
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„PED : suitable for use with group 2 gases according to Pressure
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
5
Bettis RPE-series
Product Data Sheet
June 2014
BEI.06.0065.EN Rev. 0
Data sheet RPE 65
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
8.53
8.53
B1
B2
1.97
3.7
D1
D2
2.756 5/16"-18 x 0.39
B1
30
A3
A4
4.86
5.94
B3
C1
3.15
0.87
D3
D4
1.969 1/4"-20 x 0.39
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
40 psig
Set
Start End Start End
10
90
57
265
227
20
181
114
200
123
30
271
171
134
19
40
361
228
50
452
285
60
542
341
Double-Acting
312
B2
RPE 65
A5
A6
A7
A8 E1 Max.
4.09 2.28 1.48 2.72 0.554
C2
C3
C4
C5 E1 Min.
1.18 0.55 0.79 0.47 0.551
D5
D6
E2
2.68 2.56
0.713
50 psig
Start End
349
311
284
207
219
103
392
60 psig
Start End
434
395
368
291
303
188
237
84
471
Principle
Pneumatic rack & pinion actuator
General data
Bore
3.15
Stroke
0.866
SR
7.9
Weight
DA
5.3
Port A
22
Volume
Port B
34
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
0.7
Cycle speed DA2
Close
0.5
Open
0.6
2
Cycle speed SR
Close
0.6
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
518
479
602
564
452
376
537
460
387
272
471
356
322
168
406
252
256
64
340
148
275
44
550
630
90 psig
Start End
686
648
621
544
555
440
490
336
424
232
359
129
709
100 psig
Start End
770
732
705
628
639
524
574
420
509
317
443
213
789
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
905
867
840
763
774
659
709
555
643
451
578
347
916
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„PED : suitable for use with group 2 gases according to Pressure
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
6
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BEI.06.0100.EN Rev. 0
June 2014
Data sheet RPE 100
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
9.72
9.72
B1
B2
2.36
3.82
D1
D2
2.756 5/16"-18 x 0.39
B1
30
A3
A4
5.14
6.22
B3
C1
3.15
0.87
D3
D4
1.969 1/4"-20 x 0.39
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
40 psig
Set
Start End Start End
10
131
83
394
339
20
262
166
299
188
30
392
248
203
38
40
523
331
50
654
414
60
785
497
Double-Acting
461
B2
RPE 100
A5
A6
A7
A8 E1 Max.
4.53 2.5
1.5 2.72 0.751
C2
C3
C4
C5 E1 Min.
1.38 0.55 0.79 0.47 0.748
D5
D6
E2
2.62 2.48
0.992
50 psig
Start End
518
463
423
313
328
162
579
60 psig
Start End
643
588
548
437
452
287
357
136
696
Principle
Pneumatic rack & pinion actuator
General data
Bore
3.583
Stroke
0.988
SR
10.1
Weight
DA
6.8
Port A
22
Volume
Port B
50
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
0.8
Cycle speed DA2
Close
0.6
Open
0.8
2
Cycle speed SR
Close
0.7
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
767
712
892
836
672
562
797
686
577
411
701
536
482
261
606
385
387
110
511
235
416
85
814
931
90 psig
Start End
1016 961
921
811
826
660
731
510
636
359
540
209
1049
100 psig
Start End
1141 1085
1046 935
950
785
855
634
760
484
665
334
1166
Notes:
European Directives:
„„PED : suitable for use with group 2 gases according to Pressure
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
1340 1285
1245 1134
1150 984
1054 834
959
683
864
533
1354
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
7
Bettis RPE-series
Product Data Sheet
June 2014
BEI.06.0150.EN Rev. 0
Data sheet RPE 150
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
11.97
9.25
B1
B2
2.95
3.7
D1
D2
4.016 3/8"-16 x 0.63
B1
30
B2
RPE 150
A3
A4
A5
A6
A7
A8 E1 Max.
6.19
7.28
5.00 2.72 1.93 2.95 0.751
B3
C1
C2
C3
C4
C5 E1 Min.
3.15
1.34
1.77 0.75 0.79 0.47 0.748
D3
D4
D5
D6
E2
2.756 5/16"-18 x 0.39 3.82 3.62
1.004
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
40 psig
Set
Start End Start End
10
208
131
633
544
20
416
262
482
304
30
625
393
332
65
40
833
524
50
1041 654
60
1249 785
Double-Acting
739
50 psig
Start End
832
743
681
504
531
264
927
60 psig
Start End
1031 942
881
703
730
464
580
224
1115
Principle
Pneumatic rack & pinion actuator
General data
Bore
4.055
Stroke
1.236
SR
15.2
Weight
DA
10.6
Port A
48
Volume
Port B
43
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
1.0
Cycle speed DA2
Close
0.8
Open
0.9
2
Cycle speed SR
Close
0.8
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
1231 1142 1430 1341
1080 902 1279 1102
930
663 1129 862
779
424
979
623
629
185
828
384
678
145
1304
1492
90 psig
Start End
1629 1540
1479 1301
1328 1062
1178 823
1027 583
877
344
1680
100 psig
Start End
1829 1740
1678 1500
1528 1261
1377 1022
1227 783
1076 543
1868
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
2148 2059
1997 1819
1847 1580
1696 1341
1546 1102
1395 862
2169
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„PED : suitable for use with group 2 gases according to Pressure
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
8
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BEI.06.0200.EN Rev. 0
June 2014
Data sheet RPE 200
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
14.23
10.43
B1
B2
2.95
3.7
D1
D2
4.016 3/8"-16 x 0.63
B1
30
B2
RPE 200
A3
A4
A5
A6
A7
A8 E1 Max.
6.42
7.52
5.28 2.83 1.92 3.43 0.870
B3
C1
C2
C3
C4
C5 E1 Min.
3.15
1.42
1.77 0.75 0.79 0.47 0.866
D3
D4
D5
D6
E2
2.756 5/16"-18 x 0.39 3.7 3.54
1.110
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
40 psig
Set
Start End Start End
10
289
182
862
739
20
578
364
653
407
30
867
547
443
75
40
1156 729
50
1445 911
60
1734 1093
Double-Acting
1011
50 psig
Start End
1135 1012
926
680
716
348
1269
60 psig
Start End
1408 1285
1198 953
989
621
780
289
1527
Principle
Pneumatic rack & pinion actuator
General data
Bore
4.331
Stroke
1.484
SR
21.4
Weight
DA
12.8
Port A
50
Volume
Port B
59
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
1.3
Cycle speed DA2
Close
0.9
Open
1.0
2
Cycle speed SR
Close
1.0
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
1681 1558 1954 1831
1471 1226 1744 1499
1262 894 1535 1166
1052 561 1325 834
843
229 1116 502
906
170
1784
2042
90 psig
Start End
2226 2104
2017 1771
1808 1439
1598 1107
1389 775
1179 443
2299
100 psig
Start End
2499 2376
2290 2044
2080 1712
1871 1380
1662 1048
1452 716
2557
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
2936 2813
2726 2481
2517 2149
2308 1816
2098 1484
1889 1152
2969
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„PED : suitable for use with group 2 gases according to Pressure
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
9
Bettis RPE-series
Product Data Sheet
June 2014
BEI.06.0350.EN Rev. 0
Data sheet RPE 350
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
15.15
11.18
B1
B2
3.35
3.94
D1
D2
4.016 3/8"-16 x 0.63
B1
30
B2
RPE 350
A3
A4
A5
A6
A7
A8 E1 Max.
7.92
9.06
6.5 3.35 1.65 4.29 1.067
B3
C1
C2
C3
C4
C5 E1 Min.
3.15
1.42
1.77 0.75 0.79 0.47 1.063
D3
D4
D5
D6
E2
2.756 5/16"-18 x 0.39 3.7
3.7
1.425
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
40 psig
Set
Start End Start End
10
495
312 1503 1293
20
990
624 1145 724
30
1485 936
786
156
40
1979 1248
50
2474 1560
60
2969 1872
Double-Acting
1758
50 psig
Start End
1978 1767
1619 1199
1261 630
2205
60 psig
Start End
2452 2241
2093 1673
1735 1104
1376 535
2653
Principle
Pneumatic rack & pinion actuator
General data
Bore
5.709
Stroke
1.484
SR
37.3
Weight
DA
22.9
Port A
118
Volume
Port B
103
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
1.9
Cycle speed DA2
Close
1.3
Open
1.4
2
Cycle speed SR
Close
1.5
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
2926 2716 3400 3190
2567 2147 3041 2621
2209 1578 2683 2052
1850 1009 2324 1483
1492 440 1966 914
1607 346
3100
3547
90 psig
Start End
3874 3664
3515 3095
3157 2526
2798 1957
2440 1388
2081 820
3995
100 psig
Start End
4348 4138
3990 3569
3631 3000
3272 2431
2914 1863
2555 1294
4442
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
5107 4896
4748 4328
4390 3759
4031 3190
3673 2621
3314 2052
5158
Notes:
European Directives:
„„Volume is the actual free air volume at 1 atm
„„PED : suitable for use with group 2 gases according to Pressure
„„Flange and square drive to ISO 5211
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
and additional execution please contact your regional sales office
10
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
Product Data Sheet
Bettis RPE-series
BEI.06.0600.EN Rev. 0
June 2014
Data sheet RPE 600
Imperial - ISO5211
0.16”
0.16”
2x
1/4” NPT
A8
C5
C4
A4
A3
A7
A2 (DA)
A1 (SR)
0
øE2+0.02
A5
A6
4x M5
x 0.31”
øD1
øD3
B3
C2
C1
C3
4x M5
x 0.31”
D6
E1
4x D4
4x D2
M6
x 0.47”
D5
Dim in inch.
A1
A2
18.73
14.02
B1
B2
3.86
5.83
D1
D2
4.921 1/2"-13 x 0.79
Torque output (lbf.in)
Spring-Return
Spring Stroke
Spring
Torque
(lbf.in)
Set
Start End
10
848
534
20
1695 1068
30
2543 1601
40
3391 2135
50
4238 2669
60
5086 3203
Double-Acting
B1
30
A3
A4
9.77
11.5
B3
C1
5.12
2.17
D3
D4
4.016 3/8"-16 x 0.63
40 psig
Start End
2551 2190
1937 1216
1324 241
2987
B2
RPE 600
A5
A6
A7
7.83 4.02 2.64
C2
C3
C4
2.56 -/- 1.18
D5
D6
4.65 4.45
50 psig
Start End
3356 2996
2743 2021
2129 1047
3747
60 psig
Start End
4162 3801
3548 2827
2935 1853
2321 878
4508
A8 E1 Max.
5.2
1.067
C5 E1 Min.
-/1.063
E2
1.425
Principle
Pneumatic rack & pinion actuator
General data
Bore
6.89
Stroke
1.732
SR
60.8
Weight
DA
42.8
Port A
189
Volume
Port B
174
Air connection
2x 1/4"
MOP
116
Pressure range
SR
43 - 116
DA
3 - 116
Clean, dry or lubricated
Pressure media
air or inert gas.
Open
3.2
Cycle speed DA2
Close
1.9
Open
2.2
2
Cycle speed SR
Close
2.2
Temperature range
-40°F to +176°C
Lubrication
Lubricated for life1
Rotation
90°
Over / Undertravel
+5° / -5° at each end
Polyurethane powder
Finish
coat
1. According to EN 15714-3
2. Test conditions:
Solenoid with flow capacity: 21 ft3/hr
Pipe diameter: 1/4"
Medium: clean air
Supply pressure: 5.5 bar ≈ 80 psi
Load: with average load
Stroke: 90°
Temperature: Room temperature
Air Torque (lbf.in)
SUPPLY PRESSURE
70 psig
80 psig
Start End Start End
4968 4607 5773 5413
4354 3633 5160 4438
3741 2658 4546 3464
3127 1684 3933 2490
2513 710 3319 1515
2706 541
5268
6028
90 psig
Start End
6579 6218
5965 5244
5352 4270
4738 3295
4125 2321
3511 1346
6789
100 psig
Start End
7385 7024
6771 6050
6158 5075
5544 4101
4930 3127
4317 2152
7549
Notes:
European Directives:
„„PED : suitable for use with group 2 gases according to Pressure
„„Solenoid mounting interface according to VDI/VDE 3845
(according to NAMUR)
„„For further information regarding options, materials, certifications
Sec.
Sec.
Sec.
Sec.
116 psig
Start End
8674 8313
8060 7339
7447 6364
6833 5390
6220 4416
5606 3441
8766
„„Volume is the actual free air volume at 1 atm
„„Flange and square drive to ISO 5211
inch
inch
lb
lb
cu.in.
cu.in.
NPT
psi
psi
psi
Equipment Directive 97/23/EC
„„ATEX : suitable for use in hazardous areas classified II 2 GD, zones 1
or 2 (gases) and 21 or 22 (dust)
„„For the configuration code please consult BEG.02.01.EN
and additional execution please contact your regional sales office
11
World Area Configuration Centers (WACC) offer sales support,
service, inventory and commissioning to our global customers.
Choose the WACC or sales office nearest you:
NORTH & SOUTH AMERICA
MIDDLE EAST & AFRICA
19200 Northwest Freeway
Houston, TX 77065
T +1 281 477 4100
F +1 281 477 2809
P. O. Box 17033
Dubai
United Arab Emirates
T +971 4 811 8100
F +971 4 886 5465
Av. Hollingsworth,
325, Iporanga Sorocaba,
SP 18087-105
Brazil
T +55 15 3238 3788
F +55 15 3228 3300
ASIA PACIFIC
No. 9 Gul Road
#01-02 Singapore 629361
T +65 6501 4600
F +65 6268 0028
No.1 Lai Yuan Road
Wuqing Development Area
Tianjin 301700
P.R.China
T +86 22 8212 3300
F +86 22 8212 3308
P. O. Box 10305
Jubail 31961
Saudi Arabia
T +966 3 340 8650
F +966 3 340 8790
24 Angus Crescent
Longmeadow Business Estate
East P.O. Box 6908; Greenstone;
1616 Modderfontein, Extension 5
South Africa
T +27 11 451 3700
F +27 11 451 3800
EUROPE
Berenyi u. 72- 100
Videoton Industry Park
Building #230
Székesfehérvár 8000
Hungary
T +36 22 53 09 50
F +36 22 54 37 00
For complete list of sales and manufacturing sites, please visit
www.emerson.com/actuationtechnologieslocations
Or contact us at [email protected]
www.emerson.com/bettis
All Rights Reserved.
We reserve the right to modify or improve the designs or specifications of the products mentioned in this manual at any time without
notice. Emerson does not assume responsibility for the selection, use
or maintenance of any product. Responsibility for proper selection,
use and maintenance of any Emerson product remains solely with the
purchaser.
©2014 Emerson Electric Co.