DeltaV SIS Process Safety System
Product Data Sheet
March 2017
CTO CSLS CHARM Cabinets
Front View
Rear View
CTO CSLS CHARM Cabinet.
„„Delivers “Electronic Marshalling” enabled by
CHARMs technology
„„Reduce system footprint
„„Eliminate I/O home run cables
„„Significantly reduce cabinet design engineering
„„Fully documented package
Introduction
The DeltaV SIS™ Configure-To-Order (CTO) CHARMs Smart
Logic Solver (CSLS) Cabinets provide an off-the-shelf solution
for faster project execution and reduced installation costs. CTO
CSLS Cabinets are factory tested and ready for installation in
technical rooms. Electronic Marshalling eliminates traditional
I/O design tasks and allows field wiring to start long before
safety strategies are finalized.
CTO CSLS CHARM Cabinets
Benefits
Delivers “Electronic Marshalling” enabled by
CHARMs technology: The CTO CSLS Cabinets offer the full
benefits of Electronic Marshalling. The individual channels can
be defined for any combination of field signal type, as required
by the safety equipment. This allows for 100 % utilization of
channels, regardless of the I/O signal mix. Late changes are
easily accommodated with minimal re-engineering and
no rewiring.
Reduced system footprint: Equipment room footprint is
reduced by eliminating the traditional marshalling cabinets
with cross wiring to traditional I/O cards.
Significantly reduce cabinet design engineering: The CTO
CSLS cabinets are pre-engineered and factory tested. The I/O
flexibility allows the same design to serve a wide variety of I/O
signals, conditioned individually by the CHARM. Field wiring
design is complete at the terminal block.
Fully documented package: Each cabinet is supplied with full
documentation and engineering drawings showing internal layout, bill of materials and internal wiring. They are designed to
meet local building code and industry best practices in order to
deliver proven functionality with minimal costs.
Product Description
The CTO CSLS Cabinets offering comprises a range of preengineered solutions based on industry standard, preinstalled
with CHARM I/O and related equipment, ready to be installed in
an equipment room and connected to safety instrumentation
or equipment.
The cabinets are typical, free standing enclosures intended for
floor mounting in equipment room areas, where temperature
and humidity are controlled within the requirements for
computer/electronic equipment. They come ready to
receive incoming plant AC power. All internal wiring to power
distribution components and grounding conductors has been
tested at the factory.
March 2017
These cabinets can be ordered and delivered directly together
with the DeltaV SIS electronic marshalling equipment and LS
CHARM I/O to site to begin field wiring (FAT may be optional).
The CTO CSLS Cabinets are configured by selecting a base
enclosure model and required options to meet specific
project needs.
Base enclosure models are available:
„„
For different cabinet sizes / entry (Front Access or Front
and Rear access).
„„
For different power distribution needs: DC powered or
AC powered.
„„
For different world area design standards and regulations:
EUR (Europe) and NA (US/Canada).
Configurable options examples: the type of LS CHARMS (I.S. or
non I.S.), side panels, cabinet light, nameplate engraving and
injected power.
All CTO CSLS cabinets come with following equipment installed.
„„
Primary and secondary 24VDC power distribution for LS
CHARM I/O Cards and field instrumentation.
„„
Wire ducts or wire basket.
„„
Grounding bars.
„„
Wiring plan pocket.
„„
Emerson Name Plate Holder and blank name plate insert.
„„
DeltaV LS CHARM I/O equipment based on your configuration
(and priced seperately): including CSLS carriers, CHARM base
plates, standard terminal blocks, address plugs and terminals.
The CSLS cards and LS CHARMs are not included and are to
be ordered separately.
The required number of (redundant) LS CHARM I/O cards
and CSLS cards depends on the actual number and types of
I/O that will be wired into the cabinet.
The following sections provide a more detailed specification for
the CTO CSLS Cabinets and available options.
Before delivery, each cabinet undergoes a full in-house
inspection, to assure that it is fully operational before shipping
directly to site. Electronic Marshalling eliminates the need for
any internal cross wiring and I/O rationalization there is typically
no need for FAT at a staging facility.
www.emerson.com/deltavsis
2
CTO CSLS CHARM Cabinets
March 2017
Overview of CTO CSLS Cabinets – Base Models
Description
# LS
CHARM IO
Power
Requirements
(Pri and Sec)
Permitted
Location
/ World Area
EU-CAB-800F-192-AC-CSLS
AC Powered SIS Electronic
Marshalling cabinet for 192 LS
CHARM I/O; 800mm W x
600mm D; Front Access Safe
Area Locations.
192
230 VAC
Safe
Area EUR
EU-CAB-800FR-480-AC-CSLS
AC Powered SIS Electronic
Marshalling cabinet for 480 LS
CHARM I/O; 800mm W
x 800mm D; Front and Rear
Access; Safe Area Locations.
480
230 VAC
Safe
Area EUR
NA-CAB-800F-192-AC-CSLS
AC Powered SIS Electronic
Marshalling cabinet for 192 LS
CHARM I/O; 800mm W x
600mm D; Front Access Safe
Area Locations.
192
120 VAC
Safe Area
US/CANADA
NA-CAB-800F-252-AC-CSLS
AC Powered SIS Electronic
Marshalling cabinet for 252 LS
CHARM I/O; 800mm W x
600mm D; Front Access Safe
Area Locations.
252
120 VAC
Safe Area
US/CANADA
NA-CAB-800FR-480-AC-CSLS
AC Powered SIS Electronic
Marshalling cabinet for 480 LS
CHARM I/O; 800mm W
x 800mm D; Front and Rear
Access; Safe Area Locations.
480
120 VAC
Safe Area
US/CANADA
NA-CAB-800FR-504-AC-CSLS
AC Powered SIS Electronic
Marshalling cabinet for 504 LS
CHARM I/O; 800mm W
x 800mm D; Front and Rear
Access; Safe Area Locations.
504
120 VAC
Safe Area
US/CANADA
Base Model number
The CTO base model reference for cabinets uses the following naming convention:“EUR or NA-CAB-XXXYY-ZZZIO-IP-DDDD”, where
„„
EUR : Europe Design Standards and Regulations / NA : US/Canada Design Standards and Regulations.
„„
XXX = cabinet width (mm), e.g. “800”, “1200”.
„„
YY = “F” for Front only access (600 mm deep), “FR” for Front and Rear access (800 mm deep).
„„
ZZZ= maximum I/O’s count in this CTO.
„„
IP= Incoming Power, DC=24V DC or AC=120/230V AC.
„„
DDDD= short description of content and purpose.
www.emerson.com/deltavsis
3
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800F-252-AC-CSLS
NA-CAB-800FR-504-AC-CSLS
NA-CAB-800F-192-AC-CSLS
NA-CAB-800FR-480-AC-CSLS
EU-CAB-800F-192-AC-CSLS
EU-CAB-800FR-480-AC-CSLS
Overview of CTO CSLS Cabinets models and Options
World Area
US/CAN
US/CAN
US/CAN
US/CAN
EUR
EUR
Power Input (DC: 24VDC, AC:120/230VAC)
AC
AC
AC
AC
AC
AC
Enclosure Access (F: Front, FR: Front-Rear)
F
F/R
F
F/R
F
F/R
# CHARMI/O
252
504
192
480
192
480
• : Default option setting
o : Configure To Order option setting,
different from default blank : option
setting not possible for the base
enclosure
: Intentionally left blank to fill in your
configuration choices
Base Model
Enclosure Options
Nameplate Engraving
G
Type of CHARMS
(to be specified for each row of
CHARMS)
C
Cabinet Light
L
Temperature Monitoring
T
Door Fans
F
Plinth
D
Side Panels
S
Door Hing
H
Cable Routing
Baying Kit
Cable Clamps Rail
Utility Socket Selection
24VDC for Injected Power
Certification
B
B
R
U
V
Z
0
No
○
○
○
○
○
○
1
Yes
●
●
●
●
●
●
1
Non I.S.
●
●
●
●
●
●
2
I.S.
○
○
○
○
○
○
1
No
●
●
●
●
○
○
2
Yes
○
○
○
○
●
●
0
No
○
○
○
○
○
○
1
Thermostat
●
●
●
●
●
●
1
Continuous Run
●
●
●
●
●
●
2
Thermostat Controlled
○
○
○
○
○
○
1
100mm
●
●
2
200mm
○
○
0
No
○
○
○
○
○
○
1
Yes
●
●
●
●
●
●
1
Left Hinged
●
●
2
Right Hinged
1
Cable Duct
2
Wire Basket
0
No
1
Yes
○
○
○
○
○
○
0
No
●
●
●
●
●
●
1
Yes
○
○
○
○
0
No
1
Yes
1
Front side No
●
2
Front side Yes
○
3
Rear side No
4
Rear side Yes
0
No
1
CE
2
CSA
N/A
N/A
N/A
●
●
●
●
N/A
N/A
●
●
●
○
○
●
N/A
○
●
●
○
○
○
●
●
○
○
●
●
○
○
●
●
○
○
●
●
●
○
○
●
○
○
●
N/A
●
N/A
○
○
○
○
○
○
●
●
N/A
Following more detailed options can be specified upon order (if applicable) :
„„
Disconnect switches for DC power feeds can be configured separately for CSLS power and for injected power inputs
„„
Type of utility socket : German-Russia / France-Poland / Switzerland / UK-Ireland / USA-Canada / Italy
„„
Power supply configuration : Power for CSLS and/or injected power (with diode), Front and Rear position in cabinet
„„
24VDC for injected power : optionally prewired (according specification to be provided)
„„
Wiring color scheme different from default : US (L- Black, N- White) / EUR (L- Brown, N- Blue)
„„
Input Voltage different from default : US (120VAC) / EUR (230VAC)
www.emerson.com/deltavsis
4
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800F-252-AC-CSLS
Dimensions
800mm (W) x 600mm (D) x 2000mm (H) + 100mm Plinth
Access
Front Access – single door, right hand hinged, latch type lock and 2 sets of keys
(key N°3524E)
Protection Category
IP54 – NEMA 12
Approximate Weight
~200 kg
Color
Cabinet RAL7035, Plinth RAL7022
Door Fans
Configurable: Continuous run or with thermostat control
Temperature Monitoring
Configurable: Thermostat
Other
Louvered doors with filter, mounting plate, grounding bars, wiring plan pocket,
lifting eye bolts on top, bottom cable entry, removable gland plate
Environmental Specifications
Equipment/rack room installation (HVAC controlled), 30°C Max.
Certifications
Installation in Safe Area locations; Default Certification: CE (Europe); Optional: None
Input Power
Primary and Secondary 110 VAC
Power Supply Rating
Fixed 2 x 40A
Internal Power Distribution
AC Distribution subassembly (mounted in left side)
Fully redundant 24VDC distribution for CHARM I/O cards and bussed field
power through switches and fused terminals (mounted in right side).
Local Safety Network
Redundant 100BASE-FX, RJ45 connectors, to be connected to each CSLS carrier.
Primary and Secondary Local Safety Network to 3 CSLS carriers is included.
Example BOM:
Example Layout and Installed Equipment:
„„ Power Supply subassembly.
3 LS CHARM IO rails, for total of 252 LS I/O,
„„ 3 x CSLS Carrier with redundant
Copper Ethernet connectors
„„ 21 x CHARM Base Plate
„„ 21 x CHARM Address Plug
„„ 252 x CHARM terminal blocks - Screw type
„„ 3 x CHARM I/O bus termination
„„ Base Plate and Channel Identifier Labels
No DeltaV equipment is included in the base model. All
DeltaV equipment is to be configured separately through
the Emerson quoting tools.
Top View
Front View
www.emerson.com/deltavsis
Size of Wire Baskets:
150mm H x 54mm D
5
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800F-252-AC-CSLS
Front View
Top View
External Layout Drawing for NA-CAB-800F-252-AC-CSLS: Front and Top View.
www.emerson.com/deltavsis
6
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800FR-504-AC-CSLS
Dimensions
800mm (W) x 800mm (D) x 2000mm (H) + 100mm Plinth
Access
Front Access – single door, right hand hinged, latch type lock and 2 sets of keys
(key N°3524E)
Protection Category
IP54 – NEMA 12
Approximate Weight
~300 kg
Color
Cabinet RAL7035, Plinth RAL7022
Door Fans
Configurable: Continuous run or with thermostat control
Temperature Monitoring
Configurable: Thermostat
Other
Louvered doors with filter, mounting plate, grounding bars, wiring plan pocket,
lifting eye bolts on top, bottom cable entry, removable gland plate
Environmental Specifications
Equipment/rack room installation (HVAC controlled), 30°C Max.
Certifications
Installation in Safe Area locations; Default Certification: CE (Europe); Optional: None
Input Power
Primary and Secondary 110 VAC
Power Supply Rating
Fixed 2 x 40A
Internal Power Distribution
AC Distribution subassembly (mounted in left side).
Fully redundant 24VDC distribution for CHARM I/O cards and bussed field
power through switches and fused terminals (mounted in right side).
Local Safety Network
Redundant 100BASE-FX, RJ45 connectors, to be connected to each CSLS carrier.
Primary and Secondary Local Safety Network to 3 CSLS carriers is included.
Example BOM:
Example Layout and Installed Equipment:
„„ Power Supply subassembly.
6 LS CHARM IO rails, for total of 504 LS I/O,
„„ 6 x CSLS Carrier with redundant
Copper Ethernet connectors
„„ 42 x CHARM Base Plate
„„ 42 x CHARM Address Plug
„„ 504 x CHARM terminal blocks - Screw type
„„ 6 x CHARM I/O bus termination
„„ Base Plate and Channel Identifier Labels
No DeltaV equipment is included in the base model. All
DeltaV equipment is to be configured separately through
the Emerson quoting tools.
Front View
Rear View
Size of Wire Baskets:
150mm H x 54mm D
www.emerson.com/deltavsis
7
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800FR-504-AC-CSLS
Top View
Front View
Rear View
Top View
External Layout Drawing for NA-CAB-800FR-504-AC-CSLS: Front/Rear and Top View.
www.emerson.com/deltavsis
8
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800F-192-AC-CSLS
Dimensions
800mm (W) x 600mm (D) x 2000mm (H) + 100mm Plinth
Access
Front Access – single door, right hand hinged, latch type lock and 2 sets of keys
(key N°3524E)
Protection Category
IP54 – NEMA 12
Approximate Weight
~200 kg
Color
Cabinet RAL7035, Plinth RAL7022
Door Fans
Configurable: Continuous run or with thermostat control
Temperature Monitoring
Configurable: Thermostat
Other
Louvered doors with filter, mounting plate, grounding bars, wiring plan pocket,
lifting eye bolts on top, bottom cable entry, removable gland plate
Environmental Specifications
Equipment/rack room installation (HVAC controlled), 30°C Max.
Certifications
Installation in Safe Area locations; Default Certification: CE (Europe); Optional: None
Input Power
Primary and Secondary 110 VAC
Power Supply Rating
Fixed 2 x 40A
Internal Power Distribution
AC Distribution subassembly (mounted in left side).
Fully redundant 24VDC distribution for CHARM I/O cards and bussed field
power through switches and fused terminals (mounted in right side).
Local Safety Network
Redundant 100BASE-FX, RJ45 connectors, to be connected to each CSLS carrier.
Primary and Secondary Local Safety Network to 2 CSLS carriers is included.
Example Layout and Installed Equipment:
Example BOM:
„„ Power Supply subassembly.
2 LS CHARM IO rails, for total of 192 LS I/O,
„„ 2 x CSLS Carrier with redundant
Copper Ethernet connectors
„„ 16 x CHARM Base Plate
„„ 16 x CHARM Address Plug
„„ 192 x CHARM terminal blocks - Screw type
„„ 2 x CHARM I/O bus termination
„„ Base Plate and Channel Identifier Labels
No DeltaV equipment is included in the base model. All
DeltaV equipment is to be configured separately through
the Emerson quoting tools.
Top View
Front View
www.emerson.com/deltavsis
Size of Wire Baskets:
150mm H x 54mm D
9
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800F-192-AC-CSLS
Front View
Top View
External Layout Drawing for NA-CAB-800F-192-AC-CSLS: Front and Top View.
www.emerson.com/deltavsis
10
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800FR-480-AC-CSLS
Dimensions
800mm (W) x 800mm (D) x 2000mm (H) + 100mm Plinth
Access
Front Access – single door, right hand hinged, latch type lock and 2 sets of keys
(key N°3524E)
Protection Category
IP54 – NEMA 12
Approximate Weight
~300 kg
Color
Cabinet RAL7035, Plinth RAL7022
Door Fans
Configurable: Continuous run or with thermostat control
Temperature Monitoring
Configurable: Thermostat
Other
Louvered doors with filter, mounting plate, grounding bars, wiring plan pocket,
lifting eye bolts on top, bottom cable entry, removable gland plate
Environmental Specifications
Equipment/rack room installation (HVAC controlled), 30°C Max.
Certifications
Installation in Safe Area locations; Default Certification: CE (Europe); Optional: None
Input Power
Primary and Secondary 110 VAC
Power Supply Rating
Fixed 2 x 40A (One set for front & one for rear)
Internal Power Distribution
AC Distribution subassembly (mounted in left side).
Fully redundant 24VDC distribution for CHARM I/O cards and bussed field
power through switches and fused terminals (mounted in right side).
Local Safety Network
Redundant 100BASE-FX, RJ45 connectors, to be connected to each CSLS carrier.
Primary and Secondary Local Safety Network to 2 CSLS carriers is included.
Example BOM:
Example Layout and Installed Equipment:
„„ Power Supply subassembly.
5 LS CHARM IO rails, for total of 480 LS I/O,
„„ 5 x CSLS Carrier with redundant
Copper Ethernet connectors
„„ 40 x CHARM Base Plate
„„ 40 x CHARM Address Plug
„„ 480 x CHARM terminal blocks - Screw type
„„ 5 x CHARM I/O bus termination
„„ Base Plate and Channel Identifier Labels
No DeltaV equipment is included in the base model. All
DeltaV equipment is to be configured separately through
the Emerson quoting tools.
Front View
Rear View
Size of Wire Baskets:
150mm H x 54mm D
www.emerson.com/deltavsis
11
CTO CSLS CHARM Cabinets
March 2017
NA-CAB-800FR-480-AC-CSLS
Top View
Front View
Rear View
Top View
External Layout Drawing for NA-CAB-800FR-480-AC-CSLS: Front/Rear and Top View.
www.emerson.com/deltavsis
12
CTO CSLS CHARM Cabinets
March 2017
EU-CAB-800F-192-AC-CSLS
Dimensions
800mm (W) x 600mm (D) x 2000mm (H) + 100mm/200mm Plinth configurable.
Access
Front Access – single door, right/left hand hinged configurable, latch type lock and
2 sets of keys (key N°3524E)
Protection Category
IP54 – NEMA 12
Approximate Weight
~200 kg
Color
Cabinet RAL7035, Plinth RAL7022
Door Fans
Configurable: Continuous run or with thermostat control
Temperature Monitoring
Configurable: Thermostat
Other
Louvered doors with filter, mounting plate, grounding bars, wiring plan pocket,
lifting eye bolts on top, bottom cable entry, removable gland plate
Environmental Specifications
Equipment/rack room installation (HVAC controlled), 30°C Max.
Certifications
Installation in Safe Area locations; Default Certification: CE (Europe); Optional: None
Input Power
Primary and Secondary 230 VAC
Power Supply Rating
Fixed 2 x 40A
Internal Power Distribution
AC Distribution subassembly (mounted in left side).
Fully redundant 24VDC distribution for CHARM I/O cards and bussed field
power through switches and fused terminals (mounted in right side).
Local Safety Network
Redundant 100BASE-FX, RJ45 connectors, to be connected to each CSLS carrier.
Primary and Secondary Local Safety Network to 2 CSLS carriers is included.
Example Layout and Installed Equipment:
Example BOM:
„„ Power Supply subassembly.
2 LS CHARM IO rails, for total of 192 LS I/O,
„„ 2 x CSLS Carrier with redundant
Copper Ethernet connectors
„„ 16 x CHARM Base Plate
„„ 16 x CHARM Address Plug
„„ 192 x CHARM terminal blocks - Screw type
„„ 2 x CHARM I/O bus termination
„„ Base Plate and Channel Identifier Labels
No DeltaV equipment is included in the base model. All
DeltaV equipment is to be configured separately through
the Emerson quoting tools.
Front View
www.emerson.com/deltavsis
Top View
13
CTO CSLS CHARM Cabinets
March 2017
EU-CAB-800F-192-AC-CSLS
Front View
Top View
External Layout Drawing for EU-CAB-800F-192-AC-CSLS: Front and Top View.
www.emerson.com/deltavsis
14
CTO CSLS CHARM Cabinets
March 2017
EU-CAB-800FR-480-AC-CSLS
Dimensions
800mm (W) x 800mm (D) x 2000mm (H) + 100mm/200mm Plinth Configurable.
Access
Front Access – single door, right/left hand hinged configurable, latch type lock and
2 sets of keys (key N°3524E)
Protection Category
IP54 – NEMA 12
Approximate Weight
~300 kg
Color
Cabinet RAL7035, Plinth RAL7022
Door Fans
Configurable: Continuous run or with thermostat control
Temperature Monitoring
Configurable: Thermostat
Other
Louvered doors with filter, mounting plate, grounding bars, wiring plan pocket,
lifting eye bolts on top, bottom cable entry, removable gland plate
Environmental Specifications
Equipment/rack room installation (HVAC controlled), 30°C Max.
Certifications
Installation in Safe Area locations; Default Certification: CE (Europe); Optional: None
Input Power
Primary and Secondary 230 VAC
Power Supply Rating
Fixed 2 x 40A
Internal Power Distribution
AC Distribution subassembly (mounted in left side).
Fully redundant 24VDC distribution for CHARM I/O cards and bussed field
power through switches and fused terminals (mounted in right side).
Local Safety Network
Redundant 100BASE-FX, RJ45 connectors, to be connected to each CSLS carrier.
Primary and Secondary Local Safety Network to 2 CSLS carriers is included.
Example BOM:
Example Layout and Installed Equipment:
„„ Power Supply subassembly.
5 LS CHARM IO rails, for total of 480LS I/O,
„„ 5 x CSLS Carrier with redundant
Copper Ethernet connectors
„„ 40 x CHARM Base Plate
„„ 40 x CHARM Address Plug
„„ 480 x CHARM terminal blocks - Screw type
„„ 5 x CHARM I/O bus termination
„„ Base Plate and Channel Identifier Labels
No DeltaV equipment is included in the base model. All
DeltaV equipment is to be configured separately through
the Emerson quoting tools.
Front View
www.emerson.com/deltavsis
Rear View
15
CTO CSLS CHARM Cabinets
March 2017
EU-CAB-800FR-480-AC-CSLS
Top View
Front View
Rear View
Top View
External Layout Drawing for EU-CAB-800FR-480-AC-CSLS: Front/Rear and Top View.
www.emerson.com/deltavsis
16
CTO CSLS CHARM Cabinets
March 2017
How to order a CTO Cabinet?
Project Customizations
CTO CSLS Cabinets are pre-engineered solutions developed
by Emerson’s Project Management Office (PMO) and made
available from Emerson Supply Chain.
“…What if a CTO Cabinet is 90% what I need, but I really
need my Cabinet to have…”
Please follow the steps below to configure and order a
CTO CSLS Cabinet:
Minor customizations as a variation or addition to the standard
CTO offering can often be developed in such a way that the
additional effort is incremental.
1. Specify the CTO Cabinet by selecting the base model and the
options required for the project.
In case your project would require a customer witnessed
Factory Acceptance Test, this can also be accommodated.
A configuration tool is available to aid in the selection of the
right combination of optioned CTOs.
2. Based on the specification, you will then receive:
Please work with your local Emerson Sales office or regional
Emerson assembly center to evaluate any impacts of requested
customizations to cost, delivery time and certifications.
•A quotation for the fully assembled Cabinet.
System Compatibility
•The detailed specification (drawing package) matching
your configuration, including the Bill of Materials.
CSLS Cabinets are compatible with DeltaV version 12.3
and above
3. Approve the drawing package for construction.
CSLS cards require DeltaV SZ Controllers
4. Order the CTO Cabinet as per provided quotation and
approved drawings.
Certifications
5. The CTO Cabinet is assembled, factory tested and delivered
to site. The delivery includes the as-built drawing
package (AutoCAD).
The CTO CHARMs Cabinet designs are designed to meet CE and
CSA personal safety and EMC requirements. The designs have
been submitted for the following certifications:
For questions related to specific project quotations or order
processing, please contact your local Emerson Sales office or
your regional Emerson assembly center:
For US/Canada St. Louis iCenter:
[email protected]
For Europe Cluj iCenter:
[email protected]
For Asia Pacific Singapore iCenter:
[email protected]
„„
Conformity to the relevant European directives, including
EMC (CE Marking)
„„
CSA Mark for US and Canada
For Europe Design Standards and Regulations, the cabinet
default comes with CE Certification. Optionally, no certification
can be specified.
For US/Canada Design Standards and Regulations, the cabinet
default does not come with certification. The CSA Certification
is optional.
Refer to the DeltaV SIS with Electronic Marshalling or
to the DeltaV SIS with IS Electronic Marshalling Product
Data Sheet for certification information on the DeltaV SIS
system components.
www.emerson.com/deltavsis
17
CTO CSLS CHARM Cabinets
March 2017
Related Products
„„
CSLS cards must be ordered separately
„„
LS CHARMs must be ordered separately
„„
LS CHARMS requiring other terminal blocks than the standard
terminal block should be ordered with the non-standard
terminal block
Emerson
North America, Latin America:
+1 800 833 8314 or
+1 512 832 3774
Asia Pacific:
+65 6777 8211
Europe, Middle East:
+41 41 768 6111
www.emerson.com/deltavsis
©2017, Emerson. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. The DeltaV logo is
a mark of one of the Emerson family of companies. All other marks are the property of their
respective owners.
The contents of this publication are presented for informational purposes only, and while every
effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their
use or applicability. All sales are governed by our terms and conditions, which are available on
request. We reserve the right to modify or improve the designs or specifications of our products
at any time without notice.