FLOW LIFECYCLE SERVICES
ROXAR PERFORMANCE EVALUATION SERVICES
Transforming Data into Decisions
“Roxar Performance Evaluation Reports are
very helpful in the decision-making processes.” - Major Oil & Gas Operator
A typical Performance Evaluation Report would include the following content with
data formatted into customized periods (weekly, monthly, quarterly or yearly).
++
Summary section
++
Configuration & functional check
++
Background information about the
instrument
++
++
Analysis / diagnosis of the equipment
Data analysis (average gas void fraction,
water- liquid rate, actual oil, water and gas
rates corrosion / erosion rates, sand ratio,
metal loss)
++
Hardware & software performance analysis
++
Conclusions and follow-up recommendations
MEASUREMENT EVALUATION
INTEGRITY EVALUATION
Transforming Measurement Data into Decisions
Transforming Integrity Data into Decisions
Within an operating organisation, continuous and
regular performance evaluation might be a challenging
goal. Moreover, systematic and consistent evaluation
is crucial for the overall control and security of physical
assets like pipelines, vessels, valves, chokes and other
equipment exposed to the flow of oil and gas.
The Roxar Integrity Evaluation Report is designed to
increase safety and facilitate decision-making with a
direct cost reduction effect.
A graph included in a report showing an example how meter data
from a Roxar Wet Gas Meter might be compared to other instruments.
Graph and data would then be used when analyzing / evaluating meter
performance.
A graph included in a report showing actual flow rates from a Roxar
2600 Multiphase Meter. Oil, water and gas rates as well as actual
water liquid ratio and actual gas volume fraction are presented in
the graph.
Consistency and regular evaluation of data that
the instruments deliver might be a challenge
over the asset’s lifecycle, especially during busy
operational periods.
The Roxar Measurement Evaluation Report is
designed to facilitate decision-making process
and reduce uncertainty in such circumstances.
Furthermore, local conditions, wells and
reservoir characteristics change over time and
might require fresh and new data evaluation.
Measurement Evaluation covers the following
Roxar instruments:
+ + Multiphase
+ + Wetgas
Meter (topside and subsea)
+ + Watercut
2
Flow Meter (topside and subsea)
The Integrity Evaluation report is specifically developed
for the following Roxar instruments:
+ + Corrosion
/ Erosion Probes
+ + Coupons
+ + Field
Signature Method Units
+ + Sand
Acoustic Monitor
A graph included in a report showing a map of metal
loss detected with FSM. The 3D plot view is used to
determine where localized corrosion has occurred on a
pipe. Increased corrosion at the top of the line, bottom
of the line or a weld is easily recognized.
“Useful for integrity management of the
Day-to-day monitoring ensures that the operator’s data
are correct and that operation is as safe as possible.
overall system. Determining when to use
pigging and launch pigging operation
has a direct cost and production
impact.”
- Major Oil & Gas Operator
Meter
3
PROJECT EXECUTION
AND DELIVERABLES
Performance Evaluation Services help you
build confidence in your decision-making
process through clear and concise advice
on integrity management and actionable
recommendations for well and reservoir
optimization.
+ + Time
and regular interval according to
need (weekly, monthly, quarterly, halfyearly, yearly).
+ + Roxar
internal system of review ensures
the highest quality of report and
deliverables.
+ + The
content of every report is approved
by Product Advisor / Product Engineer
with in-depth and long-lasting expertise
and knowledge on Roxar instruments.
+ + A
dedicated Roxar Service Project
Manager is the one-point contact
delivering consistency and continuity
Emerson Process Management
Roxar AS
PO Box 112
4065 Stavanger
Norway
www.EmersonProcess.com/Roxar
A graph included in a report showing an erosion event detected with a sand
erosion probe. The probe has four measuring elements for redundancy and the
graph shows metal loss for each element together with their average value. The
ruler is used to quantify metal loss and determine average erosion rate during
the erosion event.
We are able to assist you
in optimizing integrity
and performance of assets
safely through unmatched
combination of instrument and
analytics expertise, technical
knowledge and project
experience.
“The report is neat,
tidy, and easy to read,
with good structure,
and has valuable
recommendations.
Value-adding and
important for our
field.”
Please contact us at
[email protected].
- Major Oil & Gas Operator
+ + EMERSON CERTIFIED. TRUST THE INDUSTRY LEADER.
When you invest in Emerson devices, you expect a higher level of performance. You can expect
the same from Emerson’s factory-certified Lifecycle Services technicians for all diagnostics,
field service and repair. With an expanding network of service centers, rest assured we are
where you need us, when you need us.
www.EmersonProcess.com/Flow
©2015 Emerson Electric Co. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co.Roxar is a mark of one of the Emerson Process Management family of companies. All other marks
are the properties of their respective owners.
The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as
warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.