Data sheet
t to change
withoutNo.:
notice
5.204
Sheet
EL ACTUATOR WITH SPEED CONTROL TIMER - AC (Kit option)
Rev. A
Date: November 2009
1
Speed setting
2
4 3
9
Construction
This
adjustment is easily carried out with a small screwdriver, with the cover removed.
Top motor plate
The circuit board is located on top of the motor plate and is wired
directly
to the terminal strip.
Construction
Speed setting
Limitswitch and rotor
The circuit board is located on top of the motor plate and is wired directly to the terminal strip.
Specification
Voltage
Specification
Temperature
Voltage
Speed
Indication shaft
PC no No req Description
: 110 or 220V 50/60 Hz.
: -20°C to +70°C
110 or 220V
50/60 Max.
Hz.
: :Model
Min.
Temperature
: -20°C to +70°C
sec.
sec.
Speed
:ELModel
Min. 255Max.
55
11.5
sec. 298sec.
EL 100
13.5
EL 15055 17.0
11.5 383 255
EL
EL 200
100 25.5
13.5 574 298
EL
EL 350
150 41.5
17.0 936 383
EL
EL 500
200 48.5
25.5 1085 574
EL
EL
EL 800
350 48.5
41.5 1085 936
EL
EL1200
500 48.5
48.5 10851085
EL
EL1600
800 48.5
48.5 10851085
EL
EL2500
1200 53.0
48.5 11911085
Used on
9
3
Print spacer
9
3
Spacer/screw
10
1
Speed control board
EL55
EL100/2500
EL55 EL100/2500
Incoming power
N
L
Field wiring
Identification
16 Amp
Open
Close
EL 1600
EL 2500
48.5
53.0
1085
1191
Nr.:
Factory Option : Add “+ SC” to the basic actuator size.
: eg. EL100 220/50 + SC
Identification
Kit Option
: Actuator size is added to: “Kit, SC”
Factory Option : Add “+ SC” to the basic actuator size
: eg. Kit, SC/EL100 220/50
6
7
com
no
nc
Limit
switch 4
: eg. EL100 220/50 + SC
Kit
Option
: Actuator
is added
to: “Kit,
SC”
Note
1) When supplied
as size
a kit option,
all the
components
as
eg.included,
Kit, SC/EL100
shown:are
together220/50
with an instruction sheet.
2) Wiring diagram is shown with actuator in mid position.
Note 1)
When diagram
suppliedfor
asEL55
a kit220V/50Hz
option, all +the
3) Wiring
SCcomponents as shown are included,
together with an instruction sheet
2) Wiring diagram is shown with actuator in mid position
3) Wiring diagram for EL55 220V/50Hz + SC
SC
Limit
switch 3
Green
Limit switch Limit switch Heater
close 1
open 2
10W
nc
Blue
Yellow
com
no
White
nc
Red
com
no
22 23 24 25 26 27
Black
Brown
nc
10 11 12
Brown
Speed control
no
Green
Date:
Motor 1~
37 40
9
Blue
Yellow
com
4A 4
8
White
Brown
Brown
C
Actuator
wiring
5
4
Purple
Red
3
Black
2
Brown
1
EL ACTUATOR WITH SPEED CONTROL TIMER - AC (Kit option)
10
TM
www.El-O-matic.com
SC
Description
This electric actuator variation has the addition of an electronic card,
Description
this is provided complete with a dual voltage (AC.) power supply, a
This
electric
actuator
variation
has and
the aaddition
an electronic
trimmer
for motor
pulse
adjustments
triac for of
motor
switching. card, this is provided complete with a dual
voltage
(AC.)
power asupply,
a trimmer
for motor
pulse
The circuit
provides
timed ON/OFF
switching
cycle.
Theadjustments
ON pulse and a triac for motor switching.
is fixed at 0.5 sec and the OFF pulse is adjustable via the trimmer.
Thiscircuit
adjustment
is easily
carried
out withswitching
a small screwdriver,
The
provides
a timed
ON/OFF
cycle. The with
ON pulse is fixed at 0.5 sec and the OFF pulse is
the cover removed.
adjustable
via the trimmer.
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600