Data sheet
EL ACTUATOR WITH LOCAL CONTROL STATION
Sheet No.: 5.207 Rev. A
Date:
November
2009
ect to change
without
notice
LC
VALVE AUTOMATION
The first is a selector switch to switch between “LOCAL” and “REMOTE” operation of the actuator. When
The“LOCAL”
first is a selector
switchthe
to second
switch between
and to open, stop or close the valve, this switch is locked out
is selected
switch “LOCAL”
may be used
“REMOTE”
operation
of
the
actuator.
When
“LOCAL”
is
selected to the remote control station.
when “REMOTE” is selected and the control is returned
the second switch may be used to open, stop or close the valve,
this switch is locked out when “REMOTE” is selected and the
Construction
control
is returned to the remote control station.
The control box is located on the side of the actuator casting and all the connection wiring is contained
PC no NO req Description
Incoming power
Field wiring
N
internally.
Construction
The control box is located on the side of the actuator casting and
all the
connection wiring is contained internally.
Specification
PC no NO req Description
1
1
Seal
7
1
Marking tag
2
4
Screw
8
1
Selector knob
3
4
Lock washer
9
1
Selector knob
4
4
Contact block
10
1
Marking tag
5
1
Housing l.r.c.stat.
11
2
Adapter
6
2
Nameplate
12
1
Contact block
Switches: Make
: Sprecher & Schuh
Specification
First switch
: LC1-10-10020NL
Switches:
MakeSecond switch
: Sprecher
& Schuh
: LC1-10-3501
Model 1
: LC1-10-10020NL
Voltage
: Up to 600V
Model 2
: LC1-10-3501
Current : Up to 600V
: 10A max
Voltage
Temperature
: -25°C to +60°C
Current
: 10A max.
Temperature : -25°C to +60°C
L
Identification
Close
1
4
Close
Open
5A
Local
8A
Identification
Factory Option
: Add “+ LC” to the basic actuator size
Factory
Option : Add “+
LC”EL100
to the basic
actuator
: eg.
220/50
+ LCsize.
220/50size
+ LC
Kit Option : eg. EL100
: Actuator
is added to: “Kit, LC”
Kit Option
: Actuator
size
added to: 220/50
“Kit, LC”
: eg.
Kit,isLC/EL55
: eg. Kit, LC/EL55 220/50
Open
13
14
11
12
Note:
Valve shown in mid position.
* Linked for torque seated valve
Remote
Nr.:
Close
Open
nc
Heater
10W
24
com
no
Limitswitch 3
nc
25
26
27
com
no
LC
TS
open
no
23
Blue
LS
open 2
nc
22
Green
nc
Brown
nono
com
Brown
com
Blue
TS
close
*
10
Green
LS
close 1
9
Blue
nc
Yellow
nc
com
8
White
Yellow
July '96
Date:
no
Red
Black
com
M
Motor 1~
*
7
White
C
6
Yellow
5
Red
3
Black
2
Variations
Variations
: Other
for key
: Other
switchswitch
inserts inserts
for key lock,
etc.lock, etc.
Note : When
: When
supplied
a kitall
option,
all the components
as shown are included,
Note
supplied
as a kit as
option,
the components
as
with an
instruction
showntogether
are included,
together
with ansheet
instruction sheet.
: Wiring
diagram
for EL100-1600
220V/50Hz
+ LC
: Wiring
diagram
for EL100-1600
220V/50Hz
+ LC
Actuator
wiring
5.207
EL ACTUATOR WITH LOCAL CONTROL STATION - (Kit option)
Description
Description
This
electric
actuator
variation
the addition
a local control box, which has two switches.
This
electric
actuator
variation
has thehas
addition
of a localofcontrol
box, which has two switches.
Limitswitch 4
TM
www.El-O-matic.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600