Marine
Product Life Cycle Information
EPM-11, SFC-21 and CU-21 - End of life status 2016
The Level Gauging Systems “EPM-11”, “SFC-21” and “CU-21” were produced
from 1987 to 1999 by the former Finnish company SF Control. The design is
based on a technology from the middle of the 1980-ies and it is today difficult
to produce, repair and make service on included parts. Many spare parts are
still available but the number of parts and components is rapidly decreasing.
Therefore we will continue to support the electro pneumatic measurement
systems EPM-11, SFC-21 and CU-21 until the end of 2016. However, already
from January 2015 the possibility for support will gradually decrease.
Do you plan to operate your ship for many years?
We will gladly offer you our present LevelDatic, see description on the web. If
the pneumatic piping can be reused it is easy and very cost effecient to replace
the old system with LevelDatic 80S.
Is the remaining operation time for the vessel short?
We recommend you to do a system overhaul and we can assist you defining a
set of useful spare parts that will increase the possibilities for a good function
until the ship will be taken out of operation.
For support and further assistance, please contact:
[email protected], or +46 31 33 70 000
Yours sincerely
Daniel Johansson
Product Manager
Emerson Process Management
Rosemount Tank Radar AB
Box 130 45, SE-402 51 Göteborg, SWEDEN
T: +46 31 3370 000 F: +46 31 25 30 22
E-mail: [email protected]
www.emersonprocess.com/rosemountmarine
June 2014 Rev. A
©Rosemount Tank Radar AB, Sweden, 2014. Content subject to change without prior notice. The Emerson logo is a
trademark and service mark of Emerson Electric Co. The Rosemount trademark and lotogype are registered trademarks
of Rosemount Inc. All other marks are property of their respective owners.