DIMENSIONS
A
B
C
D
ID
NPT
TABLE 1 - BODY DIMENSIONS
LINE SIZE
1/2"
1"
(12.7)
(25.4)
3.4 (86.0)
3.8 (97.0)
4.7 (119.4)
5.2 (132.1)
3.0 (76)
3.3 (84)
.805 (20.5)
1.280 (32.5)
.622 (15.8)
1.049 (26.6)
1/2" NPT
1" NPT
REVISIONS
DESCRIPTION
REV
1-1/2"
(38.1)
4.5 (114.0)
5.9 (149.9)
3.7 (94)
1.865 (47.4)
1.500 (38.1)
1-1/2" NPT
AE
ADD ALLOY C-276 & 3051SMV
CHG.NO.
APP'D
DATE
DSI1003150
JR
02/15/10
2X 1/4" NPT VENT VALVES
ID
ID
D
NPT
NPT FEMALE BODY
OPTION CODE T1
SOCKET WELD BODY
OPTION CODE S1
TRANSMITTER
B
8.8 (223.5)
4.0 (101.6)
FLOWMETER
TRANSMITTER
A
TRANSMITTER
B
2051CFP
6.19
[157,2]
10.22
[259,6]
3051CFP
6.26
[159,0]
10.29
[261,4]
3051SFP
7.70
[195.6]
11.73
[297,9]
3095MFP
6.26
[159,0]
10.29
[261,4]
5.3 (134.1)
B
TRANSMITTER
A
C
FLOW
SOCKET WELD OR THREADED BODY TYPE
(3051SFP FLOWMETER SHOWN THROUGHOUT /
3095MFP, 3051CFP, 2051CFP Available)
A
*ALL DIMENSIONS ARE NOMINAL
AND ARE FOR REFERENCE ONLY
®
TYPE I
*UNLESS OTHERWISE SPECIFIED
DIMENSIONS IN INCHES (MM)
J.Rumsey
DR.
BOULDER, COLORADO
08/26/04 TITLE
APPROVAL
DRAWING
TAGGING
SPECIALS
K.Green
08/26/04
DIMENSION DRAWING, MODEL 1195
INTEGRAL ORIFICE PLATE / FLOWMETER
(3051SFP, 3051CFP, 2051CFP, 3095MFP)
SIZE
C
SCALE: NONE
DRAWING NO.
01195-1002
SHEET
1
OF
11
NOTES:
E
F
G
BORE
1.
ROSEMOUNT CERTIFIES THIS DRAWING IS IN ACCORDANCE WITH ROSEMOUNT ENGINEERING SPECIFICATIONS
AND ACCURATELY REPRESENTS THE EQUIPMENT FURNISHED.
2.
SENSOR ORIENTATION SHOWN FOR DETAIL ONLY. FOR ACTUAL RECOMMENDED LOCATION & ORIENTATION
REFER TO INSTALLATION INSTRUCTION MANUAL 00809-0100-4686.
3.
FOR MODEL SELECTIONS, REFER TO ROSEMOUNT PRODUCT DATA SHEET 00813-0100-4686.
4.
UNIT MAXIMUM TEMPERATURE IS 450 (232 C) DIRECT MOUNT ELECTRONICS, 850 F (454 C) FOR REMOTE
MOUNT ELECTRONICS.
5.
MATERIAL FOR UNITS IS 316/316L STAINLESS STEEL; ALLOY C-276; OR ALLOY 400.
6.
ORIFICE TYPE IS SQUARE EDGE - ORIFICE BORE SIZES .066 & LARGER. FOR ORIFICE .010 TO .034
(1/2" LINE SIZE ONLY) ORIFICE TYPE IS QUADRANT EDGE.
7.
UNITS CAN BE ORDERED TO MEET 600# ANSI / DIN PN100 RATING.
8.
1/2" NPT FLANGE ADAPTERS CAN BE ROTATED TO GIVE CONNECTION CENTERS OF 2.00 INCH (51mm),
2.13 INCH (54mm) OR 2.25 INCH (57mm).
9.
FOR OPTIMUM PERFORMANCE, ORIENTATION AND FLOW DIRECTION IS AS FOLLOWS:
GAS:
DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR
DOWNWARD FLOW IN A VERTICAL LINE. REMOTE MOUNTING IS RECOMMENDED WITH UPWARD
FLOW IN A VERTICAL LINE.
.162 (4.11)
LIQUID: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR UPWARD
FLOW IN A VERTICAL LINE. IT IS NOT RECOMMENDED TO USE WITH DOWNWARD FLOW IN A VERTICAL
LINE.
ORIFICE PLATE
DETAIL
STEAM: REMOTE MOUNTING IS ACCEPTABLE WITH HORIZONTAL OR UPWARD FLOW IN A VERTICAL LINE.
DIRECT MOUNTING IS RECOMMENDED ONLY IN A HORIZONTAL LINE. IT IS NOT RECOMMENDED TO USE
WITH DOWNWARD FLOW IN A VERTICAL LINE.
10.
TABLE 2 - ORIFICE PLATE
LINE SIZE
1/2"
1"
(12.7)
(25.4)
3.6 (91.0)
3.9 (99.0)
2.6 (66)
3.0 (76)
2.5 (64)
3.0 (76)
DIMENSIONS
E
F
G
ALL DIMENSIONS ARE SHOWN IN INCHES / (MILLIMETERS).
1-1/2"
(38.1)
4.4 (112.0)
3.5 (89)
3.5 (89)
TABLE 3 - ORIFICE PLATE
BORE
0010
0014
0020
0034
0066
0109
0160
0196
0260
0340
0150
0250
0345
0500
0630
0800
0295
0376
0512
0748
1022
1184
NPS
1/2"
1"
1-1/2"
DESCRIPTION
IN .XXX" (mm)
.010 (.25)
.014 (.36)
.020 (.51)
.034 (.86
.066 (1.68)
.109 (2.77)
.160 (4.06)
.196 (4.98)
.260 (6.60)
.340 (8.64)
.150 (3.81)
.250 (6.35)
.345 (8.76)
.500 (12.70)
.630 (16.00)
.800 (20.32)
.295 (7.49)
.376 (9.55)
.512 (13.00)
.748 (19.00)
1.022 (25.96)
1.184 (30.07)
®
BOULDER, COLORADO
SIZE
A
FSCM.NO.
SCALE: NONE WT.
DRAWING NO.
01195-1002
SHEET
2
OF
11
DIMENSIONS
B.D.
L
M
TOTAL .13 ( 3.3)
TABLE 4 - NPT PIPE ENDS
LINE SIZE
1/2"
1"
(12.7)
(25.4)
.664 (16.9)
1.097 (27.9)
12.54 (318.4)
20.24 (514.0)
5.74 (145.7)
8.75 (222.2)
18.27 (464.1)
28.98 (736.1)
1-1/2"
(38.1)
1.567 (39.8)
28.44 (722.4)
11.91 (302.6)
40.35 (1024.9)
THREADED PIPE ENDS
PER ANSI B2.1
(BOTH ENDS)
FLOW
REFER TO SHEET 1 OF 11
FOR 1195 BODY DIMENSIONS
B.D.
REFER TO SHEET 2 OF 11
FOR ORIFICE PLATE
DIMENSIONS
M (DOWNSTREAM)
L (UPSTREAM)
TOTAL
®
BOULDER, COLORADO
THREADED PIPE ENDS
SIZE
A
FSCM.NO.
SCALE: NONE WT.
DRAWING NO.
01195-1002
SHEET
3
OF
11
DIMENSIONS
B.D.
L
M
TOTAL .13 ( 3.3)
FLOW
REFER TO SHEET 1 OF 11
FOR 1195 BODY DIMENSIONS
TABLE 5 - BEVELED PIPE ENDS
LINE SIZE
1/2"
1"
(12.7)
(25.4)
.664 (16.9)
1.097 (27.9)
12.54 (318.4)
20.24 (514.0)
5.74 (145.7)
8.75 (222.2)
18.27 (464.1)
28.98 (736.1)
1-1/2"
(38.1)
1.567 (39.8
28.44 (722.4)
11.91 (302.6)
40.35 (1024.9)
37.5° 1
+.000
.030
- .020
(.51 +0/-.51)
B.D.
REFER TO SHEET 2 OF 11
FOR ORIFICE PLATE
DIMENSIONS
M (DOWNSTREAM)
L (UPSTREAM)
TOTAL
®
NOTE:
1.
45° IS AN ACCEPTABLE ALTERNATIVE TO 37.5° FOR CODE MEETING ASME 31.1.
BOULDER, COLORADO
BEVELED PIPE ENDS
SIZE
A
FSCM.NO.
SCALE: NONE WT.
DRAWING NO.
01195-1002
SHEET
4
OF
11
TABLE 6 - SLIP-ON FLANGE PIPE ENDS
LINE SIZE
DIMENSIONS
1/2"
1"
(12.7)
(25.4)
B.D.
.664 (16.9)
1.097 (27.9)
J
12.62 (320.4)
20.32 (516.0)
K
5.82 (147.8)
8.83 (224.2)
TOTAL .25 ( 6.4)
18.43 (468.2)
29.14 (740.2)
1-1/2"
(38.1)
1.567 (39.8)
28.52 (724.4)
11.99 (304.6)
40.51 (1029.0)
REFER TO SHEET 1 OF 11
FOR 1195 BODY DIMENSIONS
FLOW
B.D.
REFER TO SHEET 2 OF 11
FOR ORIFICE PLATE
DIMENSIONS
K (DOWNSTREAM)
J (UPSTREAM)
TOTAL
®
BOULDER, COLORADO
SLIP-ON FLANGE PIPE ENDS
SIZE
A
FSCM.NO.
SCALE: NONE WT.
DRAWING NO.
01195-1002
SHEET
5
OF
11
TABLE 7 - WELD NECK FLANGED PIPE ENDS
LINE SIZE
DIMENSIONS
1/2"
1"
1-1/2"
(12.7)
(25.4)
(38.1)
B.D.
.664 (16.9)
1.097 (27.9)
1.567 (39.8
J (RF 150#)
14.37 (364.9)
22.37 (568.1)
30.82 (782.9)
K (RF 150#)
7.57 (192.3)
10.88 (276.3)
14.29 (363.1)
TOTAL .25 ( 6.4)
21.94 (557.2)
33.25 (844.5)
45.12 (1146.0)
J (RF 300#)
14.56 (369.8)
22.63 (574.7)
31.06 (789)
K (RF 300#)
7.76 (197.1)
11.14 (282.9)
14.53 (369.2)
TOTAL .25 ( 6.4)
22.32 (566.9)
33.77 (857.7)
45.60 (1158.2)
J (RF 600#)
14.81 (376.0)
22.88 (581.0)
31.38 (797.1)
K (RF 600#)
8.01 (203.4)
11.39 (289.2)
14.85 (377.2)
TOTAL .25 ( 6.4)
22.81 (579.4)
34.26 (870.3)
46.23 (1174.3)
WELD NECK FLANGE
ANSI 150#, 300# & 600#
REFER TO SHEET 1 OF 11
FOR 1195 BODY DIMENSIONS
B.D.
FLOW
REFER TO SHEET 2 OF 11
FOR ORIFICE PLATE
DIMENSIONS
K (DOWNSTREAM)
J (UPSTREAM)
TOTAL
®
BOULDER, COLORADO
WELD NECK FLANGE PIPE ENDS
SIZE
A
FSCM.NO.
SCALE: NONE WT.
DRAWING NO.
01195-1002
SHEET
6
OF
11
R
1/2" NPT
FLOW
RTDL
OPTIONAL TEMPERATURE SENSOR
TABLE NO. 8
OPTIONAL RTD TEMPERATURE CONNECTION
LINE SIZE
DIMENSIONS
1/2" (12.7)
1" (25.4)
1-1/2" (38.1)
R
7.4 (188)
7.8 (198)
8.4 (213)
RTDL
3.11 (78.9)
5.25 (133.4)
7.50 (190.5)
®
BOULDER, COLORADO
SIZE
A
FSCM.NO.
SCALE: NONE WT.
DRAWING NO.
01195-1002
SHEET
7
OF
11
3051SFP (SHOWN)
DIRECT MOUNT 3051SMV TRANSMITTER (W/TEMPERATURE)
AND 5-VALVE MANIFOLD
(TYP EXAMPLE / 3095MFP; 3051CFP; 2051CFP AVAILABLE)
®
BOULDER, COLORADO
SIZE
A
SCALE:
FSCM.NO.
1:1
WT.
DRAWING NO.
01195-1002
SHEET:
8
of
11
3-VALVE MANIFOLD
12X NUT - ASTM A194
4X STUD - ASTM A193 B7
2X
PTFE/GLASS FILLED
GASKET
4X STUD - ASTM A193 B7
2X STUD - ASTM A193 B7
2X
PTFE/GLASS FILLED
GASKET
TRANSMITTER AND MANIFOLD
EXPLODED VIEW
®
BOULDER, COLORADO
SIZE
A
FSCM.NO.
SCALE: NONE WT.
DRAWING NO.
01195-1002
SHEET
9
OF
11
FLOWMETER
TRANSMITTER
E
TRANSMITTER
F
2051CFP
7.03
[178,5]
10.85
[275,6]
FLOWMETER
TRANSMITTER
C
TRANSMITTER
D
3051CFP
7.1
[181]
10.92
[277,4]
2051CFP
7.03
[178,5]
10.81
[274,8]
3051SFP
8.55
[217,0]
12.37
[314,2]
3051CFP
7.1
[181]
10.88
[276,4]
3095MFP
7.1
[181]
10.92
[277,4]
3051SFP
8.55
[217,0]
12.33
[313,2]
3095MFP
7.1
[181]
10.88
[276,4
TRANSMITTER
E
TRANSMITTER
F
TRANSMITTER
C
TRANSMITTER
D
DIRECT MOUNT TRANSMITTER AND
STANDARD / HIGH TEMPERATURE MANIFOLD
®
DIRECT MOUNT TRANSMITTER AND
ALLOY C-276 MANIFOLD
BOULDER, COLORADO
SIZE
A
SCALE:
FSCM.NO.
1:2
WT.
DRAWING NO.
01195-1002
SHEET:
11
10
of
8X NUT - ASTM A194
8
2.00 (51)
2.13 (54)
2.25 (57)
.709
( 18.0)
.992
( 25.2)
DETAIL A
SCALE 6 : 4
4X STUD - ASTM A193 B7
2X
PTFE/GLASS FILLED
GASKET
.094
(2.4)
2.13
(54)
A
1.10 (27.9)
DIN 19231 TRANSMITTER
CONNECTION
ADAPTERS FOR REMOTE MOUNTING
®
BOULDER, COLORADO
SIZE
A
SCALE:
FSCM.NO.
1:2
WT.
DRAWING NO.
01195-1002
SHEET:
11
11
of