Tank monitoring system that gives you peace of mind

Tank monitoring system that
gives you peace of mind
Complete system
provides:
+ Dynamic software
interface
+ Advanced radar
technology
+ Increased safety
Unique system for increased control and safety
Tank monitoring system for small tank farms
It should always be easy to be in control of tank inventory, even in your small tank farms –
safely, efficiently and cost effectively.
EmersonTM offers you a solution that brings level measurements straight into your control room with ease.
You will be able to:
+ Monitor level measurements and volumes in a dynamic software environment
+ Ease your workload by removing manual level measurement using proven and reliable radar technology
+ Increase personnel safety by reducing the need to visit and climb your tanks
When you choose Emerson you will save money on installation with our unique RosemountTM 2410 Tank
Hub. The only power supply you need is to the tank hub, and then you daisy chain between the radar devices.
This will cut the cost of cabling in half. No rack, barriers, power conditioner and no bus termination – it is all
handled by the tank hub. You can save even more on cabling costs by using Emerson 775 Wireless THUM™
Adapters on the radar devices and communicating with a wireless gateway, instead of via the tank hub.
You have:
We provide:
You get:
A tank monitoring
system that is
ü Safe
ü Efficient
ü Cost effective
Small tank farm
World class products Unique software interface
The Tank Monitoring System
Perfect for base chemical tanks, batch tanks, day tanks, clarifiers, oil & gas applications and more.
The system consists of:
+ Rosemount 5300 Guided Wave Radar and/or Rosemount 5400 Non-Contacting Radar - radar technology for level measurement that is virtually unaffected by any process
conditions.
+ TankMaster Winview - the operator’s interface to small tank farms. It provides level
measurement control, volume calculations, and alarm handling as well as automatic
report handling.
+ Rosemount 2410 Tank Hub - collects and transfers data between field devices and the
control room. It also feeds power to the Rosemount field devices on the FISCO compliant
intrinsically safe Tankbus. It supports standard protocols and emulation of other vendors protocols, and offers two configurable integral relay outputs.
+ Wireless Gateway - provides security, scalability, and data reliability. Layered security
ensures that the network stays protected. Its self-organizing nature automatically establishes, and continuously assesses, communication paths that ensure simple commissioning and optimal data reliability.
+ Emerson 775 Wireless THUM Adapter - retrofits on any existing two- or four-wire
HART® device and enables WirelessHART® transmission of measurement and diagnostic
information.
Rx
Tx
USB
RS-232
Ext. pwr
Rosemount TankRadar
Lo - GAIN - Hi
On - TERM - Off
FBM 2180
Wireless alternative
solution
TankMaster
Winview
Rosemount 2410
Tank Hub
Instrumented tank farm
Rosemount
Wireless
Gateway
Instrumented tank farm
For further details go to www.rosemount.com/level and www.rosemount.com/tankgauging
Global Headquarters
Emerson Process Management
6021 Innovation Blvd.
Shakopee, MN 55379 USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
[email protected]
00807-0200-4026, Rev AA
Standard Terms and Conditions of Sale can be found at www.rosemount.com/terms_of_sale.
The Emerson logo is a trademark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are trademarks of Rosemount Inc.
WirelessHART and HART are registered trademarks of the FieldComm Group.
© 2015 Emerson Process Management. All rights reserved.