SHIVAJI UNIVERSITY, KOLHAPUR-416004, MAHARASHTRA
f'kokth
f'ko kth fo|kihB] dks Y gkiw j &416004 egkjk"Vª
A
Reaccredited by
NAAC (2014) With CGPA-3.16
PHONE: EPABX – 0091-0231-2609000
CoE Office: 0231-2693176
Engineering & Technology Exam. Section: 0231-2609122
FAX: 0091-0231-2690655
Website: www.unishivaji.ac.in
E-mail: coe@unishivaj
Ref.: - SU/Engg. & Tech. Exam./ 2650
Date – 10th September, 2015
To,
The Principals/Directors,
Affiliated Colleges/Institutites
Sub:- Draft Programme of the FE to BE Examination
to be held in December, 2015.
Sir/Madam,
Please find enclosed here with the Draft Theory Programme of
above examinations to be held in December, 2015. Kindly display the
same on the notice board of your college immediately for the information
of the students and teachers concerned. If there are any over lapping of
the subjects offered by candidates. Please communicate this office on or
before 19th September, 2015 positively.
In case no comments are received from you before the above date,
it will be presumed that the programme is in order and the same will be
finally notified and no complaints will be entertained, thereafter.
The same is
www.unishivaji.ac.in
available
on
the
University
website
i.e.
Thanking you,
Yours faithfully,
Sd/-
Assistant Registrar
(On Exam)
Encl : as above.
Copy for information and further necessary action.
1. Hon’ble C.O.E. office
2. 2.Dy. Registrar, Pre-Exam
3. Dy. Registrar, Post-Exam.
4. 4. Strong Room
5. 5. Godown Section
1
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
Exam Dec 2015
S H I V A J I U N I V E R S I T Y, K O L H A P U R.
Circular No. - 301 - Exam of Dec – 2015.
Draft Programme of the F.E. to B.E. SEM.-I to VIII Examinations in the
Branches Civil/ Mechanical/ Electrical/ Electronics/ Chemical/ Production/
Electronics and Tele-Comm./ Instrumentation/ Environmental/ Automobile/
Computer/ Information Technology /Biotechnology/ Electrical & Electronics
/Aeronautical Engg. / Mechanical and Automation Engg. to be held in Dec- 2015.
The candidates are requested to be present at their respective place of
examination FIFTEEN MINUTES before the time appointed for setting of the
First paper and TEN MINUTES before the time of setting of each subsequent
paper. They are forbidden to take any book or paper into the Examination
Hall. The Written, Practical and Oral Examinations will be held at the following
places.
No
Centre
Place
1
ASHTA
Annasaheb Dange, College of Engg. & Tech., Ashta
2
KARAD
Govt. College of Engineering, Karad
3
4
Bharthi Vidyapeeth College of Engineering, Kolhapur.
KOLHAPUR
D. Y. Patil College of Engg. & Tech., Kolhapur
5
KIT’s College of Engineering. Kolhapur
6
7
JAYSINGPUR
D.Y. Patil Prathisthans College of Engineering, Salokhe
Nagar, Kolhapur.
J. J. Magdum College of Eng. Jaysingpur
8
BUDHAGAON
P.V.P. Institute of Technology, Budhagaon.
9
SAKHARALE
10
SATARA
Rajarambapu Institute of Tech. College of Eng.
Sakharale
K.B.P. College of Eng. & Polytechnic, Satara
11
ICHALKARANJI
D.K.T.E.’s Textile & Engg. Inst. Ichalkaranji
12
WARANANAGAR
Tatyasaheb Kore Inst. of Eng. & Tech. Warananagar
13
SANGLI
14
SOLAPUR
Shri Ambabai Talim, College of Engg & Tech,
Wanlesswadi Miraj
H. N. College, Solapur.
15
PANDHARPUR
H. N. College, Solapur.
16
RAIGAON
TE/BE,
Late NBC Institute of Engg & Tech., Raigaon (Satara)
BE Repeater Exam will be
conducted
17
LIMB
Satara College of Engg. & Mgt. Limb, Tal:/Dist: Satara.
18
BANAWADI
Dr. Daulatrao Aher College of Engg. Banawadi
19
VITA
Adarsh Inst. of Tech.& Research Centre, Vita,
Dist: Sangli
2
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
20
Yadrav
Sharad Institute of Tech’s College of Engg Yadrav,
Tal: Shirol,
21
Wadwadi
Abhinav Edu.Society, College of Engg & Tech,
Wadwadi, Khandala,
22
Atigre
Sou.S.D. Ghodawat Charitable Trust’s Group of
Insti, Atigre
23
Panhala
Sanjeevan Engineering & Technology, Institute,
Panhala,
24
25
Vathar-tarf –
Shri. Balasaheb Mane Shikshan Prasarak Mandal,
Vadgaon
Group of Institutions, Vathar-Tarf-Wadgaon,
Kille Machindragad
Jaywant College of Engg. & Mgt., Walva,
Kille Machindragad.
– Only FE & SE Fresh , TE/BE &
BE Repeater Exam will be
conducted
26
27
28
Panmalewadi,
Post : Varye,
Vikaswadi,
Tal.-Kagal
Talsande,
Arvind Gavali College of Engineering, Panmalewadi,
Post : Varye, Tal/Dist: Satara.
Dhananjay Mahadik Group of Institutions,
209/A, NH-4, Vikaswadi, Kagal, Kolhapur
D.Y. Patil Education Society’s, D.Y. Patil Technical
Campus, Talsande, Tal: Hatkanangale, Dist: Kolhapur.
Tal.-Hatkanangale
29
Thakurki,
Phaltan Education Society’s Colege of Engineering,
Sr.No. 31, A/p: Thakurki, Tal: Phaltan, Dist: Satara.
Tal.- Phaltan
30
Wadhe, Satara
31
Peth, Tal.- Walwa
Yashoda Technical Campus, Faculty of Engg, Wadhe,
Satara.
Nanasaheb Mahadik College of Engineering Peth,
32
Kasarwadi
Genesis Institute of Tech. Kasarwadi, Tal: Hatkanangale
33
Chinchewadi
34
Patgaon
35
Urun-Islampur
36
Sajjangad
37
Guddai A/P- Bhadgaon,
Sant. Gajanan Maharaj College of Engineering
Chinchewadi, Tal; Gadhinglaj
Shivganga Charitable Trust Sangli’s
Vishveshwariya Technical Campus Faculty of Degree
Engg, Patgaon, Miraj, Miraj Pandharpur Road, MIRAJ.
Manajiraje Bhosale Technical Campus, Facult of Engg,
Islampur-Sangli Road, Urun Islampur, Tal: Walwa,
Dnyanashree Institute of Engg & Tech. Sonavadi
Gajawadi, Sajjangad Road, Tal/Dist: Satara.
Dr. A.D. Shinde College of Engineering, Guddai., A/PBhadgaon, Tal – Gadhinglaj.
Tal –Gadhinglaj.
3
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
F.E. Sem. 1 & 2 Exam Dec 2015
3.
The written examination will be conducted in the following order:
First Year – Semester 1 & 2
(Time 02:30 p.m. to 05:30 p.m.)
Day & Date
Tuesday
01/12/2015
Thursday
03/12/2015
Saturday
05/12/2015
Tuesday
08/12/2015
Thursday
10/12/2015
Saturday
12/12/2015
Tuesday
15/12/2015
Thursday
17/12/2015
Saturday
19/12/2015
Tuesday
22/12/2015
Subject Name
Sub. Code
Engineering Mathematics- II
59933
Engineering Physics
59176
Engineering Chemistry
59183
Basic Electrical Engineering
59178
Fundamentals of Electronics and Computer
Not – Use only one Answer Book for section 1 & 2
59184
Basic Civil Engineering
59179
Applied Mechanics
59185
Engineering Graphics
Time 01:30 p.m. to 05:30 p.m.
59180
Basic Mechanical Engineering
59186
Engineering Mathematics-1
59177
4
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 3 Exam Dec 2015
Second Year – Semester 3
Time 10:00 a.m. to 01:00 p.m.
Day & Date
Monday
07/12/2015
Branch Name
Subject
Sub.Code.
Civil
Engineering Maths- III
63338
Environmental
Engineering Maths- III
63500
Mechanical
Engineering Maths- III
63350
Automobile
Engineering Maths- III
63380
Electrical
Engineering Maths- III
63368
Electronics
Engineering Maths- III
63434
Chememical
Engineering Maths- III
63421
Producation
Engineering Maths- III
63473
Instrumentation
Electronics &
TeleCommunication
Information
Technology
BioTechnology
Aeronautical
Mechanical &
Automation
Mathematics- III
63490
Engineering Maths- III
63460
Discrete Mathematical Structures
63512
Engineering Maths- III
63446
Engineering Maths- III
63991
Engineering Maths- III
64007
Civil
Applied Mathematics
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
Surveying- I
Environmental
Environmental Chemistry & Microbiology
63501
Mechanical
Applied Thermodynamics
63352
Automobile
Applied Thermodynamics
63382
Electrical
Analog Electronics Engineering
Electronic Measurement and
Instrumentation
Chemistry- I
Machine Drawing
(Time 09.30 am to 01.30 pm)
Electrical Machines & Drives
63370
Computer
Science &
Engineering
Electronics
Chemical
Wednesday Producation
09/12/2015 Instrumentation
Electronics &
TeleTransducers and Measurements
Communication
Bio- Technology Microbiology
Aeronautical
Mechanical &
Automation
Computer
Science &
Engineering
Information
Technology
63524
63339
63435
63422
63474
63491
63464
63450
Applied Thermodynamics
63992
Thermal Science
64008
Discrete Mathematical Structures
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
Digital System and Microprocessor
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
63525
63513
5
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 3 Exam Dec 2015
Day & Date
Branch Name
11/12/2015
Building Constructions & Materials
63342
Environmental
Ecology & Environmental Sanitation
63504
Mechanical
Metallurgy
63353
Automobile
63383
Electronics
Automotive Materials and Manufacturing
Electrical Engineering Materials & Energy
Conversion
Network Analysis
Chemical
Fluid Mechanics
63424
Production
Electrical & Electronics Engineering
63476
Instrumentation
Electronics &
TeleCommunication
Bio-Technology
Applied Electronics
63488
Network Analysis
63463
Macromolecules And Biomembranes
63448
Aeronautical
Mechanical &
Automation
Mechanics of Solids
63995
Mechanical Engineering Drawing
64012
63438
Civil
63341
Environmental
Fluid Mechanics- I
63502
Mechanical
Fluid Mechanics
63354
Automobile
Electrical Technology
63381
Electrical
Electromagnetic and Electrical Circuits
63371
Electronics
Analog Communication
63437
Chemical
Mechanical Operations
63425
Producation
Machine Tools & Processes
63472
Instrumentation
Electronics &
TeleCommunication
Information
Technology
Bio-Technology
Transducer Technology
63487
Digital Electronics
63462
Aeronautical
Mechanical &
Automation
Fluid Mechanics
63993
Fluid Mechanics
64010
Information
Technology
14/12/2015
63369
Microprocessors
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
Data Communication
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
Fluid Mechanics- I
Computer
Science &
Engineering
Monday
Sub.Code.
Civil
Electrical
Friday
Subject
Computer
Science &
Engineering
Fundamentals of Economics and
Management
Unit Operations – I
Data Structures
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
63528
63514
63515
63447
63526
6
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 3 Exam Dec 2015
Day & Date
Wednesday
Branch Name
Strength of Material -I
63340
Environmental
Surveying Remote Sensing & GIS
63503
Mechanical
Electrical Technology
63351
Automobile
Fluid Mechanics
63384
Electrical
Measurements and Instrument
63372
Electronics
Electronic Circuit Analysis & Design – I
63436
Chemical
SOM & MOC
63423
Producation
Thermal Engineering
63475
Linear Integrated Circuits
63489
Analog Circuits– I
63461
Statistics & Fuzzy Systems
63516
Cell Biology
63449
Elements of Aeronautics
63994
Electric Drives and Controls
64009
Aeronautical
Mechanical &
Automation
Computer
Science &
Engineering
18/12/2015
Sub.Code.
Civil
16/12/2015 Instrumentation
Electronics &
TeleCommunication
Information
Technology
Bio-Technology
Friday
Subject
Information
Technology
Mechanical &
Automation
Data Communication
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
Problem Solving Using ‘C’
Online : 10.00 am to 11.00 am
O M R : 11.30 am to 12.30 pm
Manufacturing Technology
63527
63517
64011
7
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 4 Exam Dec 2015
Second Year – Semester 4 (Old Syllabus) (Last Chance)
Time 10:00 a.m. to 01:00 p.m.
Day & Date
Monday
30/11/2015
Branch Name
Structural Mechanics-II
43586
Environmental
Environmental Microbiology
43669
Mechanical
Analysis of Mech Elements
43592
Automobile
Programming & Computational Methods
43600
Electrical
Signals & systems
43643
Electronics
Electronic Circuit Analysis & Design –II
43608
Chemical
Engg. Maths-IV
43656
Production
Advanced Machine Tools & Processes
43621
Instrumentation
Electronics &
TeleCommunication
Digital systems & Micro processes
43629
Analog Electronic Circuits & Design- II
43663
Automata Theory
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
43614
Applied Mathematics- II
43636
Biostatistics
43649
Electric Machine - I
51184
Surveying –II
43587
Environmental
Environmental Geology
43670
Mechanical
43593
43601
Electrical
Numerical Methods
Kinematics of Machines
(Time: 09.00 am to 01.00 pm)
A.C. Machines
Electronics
Analog Communication
43609
Chemical
Chemistry- II
43657
Producation
Foundry Technology
43622
Instrumentation
Electronics &
TeleCommunication
Automatic Control systems
43630
Electronics Communication Systems
43664
Computer Networks-II
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
43615
Advanced Microprocessors
43637
Unit Operations- II
43650
Power Systems-II
51185
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Civil
Automobile
01/12/2015
Sub.Code.
Civil
Computer
Science &
Engineering
Tuesday
Subject
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
43644
8
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 4 Exam Dec 2015
Day & Date
Wednesday
02/12/2015
Branch Name
Engineering Geology
43588
Environmental
Water Supply Engineering
43671
Mechanical
Metallurgy
43594
Automobile
Metallurgy & Metal Treatments
43602
Electrical
Industrial Management & Economics
43645
Electronics
Signals & systems
43610
Chemical
Process calculation
43658
Producation
Analysis of Machine Elements
43623
Instrumentation
Electronics &
TeleCommunication
Sensors & Transducers
43631
Microprocessor & Peripherals
43665
Computer Organization
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
43616
Data Communication
43638
Enzyme Technology
43651
Electrical & Electronics Measurement
51186
Information
Technology
BioTechnology
Electronics &
Electrical
Engineering
Environmental
Building Design
(Time: 09.00 am to 01.00 pm)
Environmental Chemo Dynamics
43672
Mechanical
Machine Tool
43595
Automobile
Fluid Machines
43603
Electrical
Electrical Measurement
43646
Electronics
Digital Design
43611
Chemical
Heat Transfer
43659
Production
Welding Technology
43624
Instrumentation
Electronics &
TeleCommunication
Thermal & Fluid Power Engineering
43632
Data structures
43666
Advanced Microprocessors
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
43617
Computer Organization & Architecture
43639
Metabolic Pathways and their Regulations
43652
Signals and Systems
51187
Fluid Mechanics -II
43590
43673
43596
Automobile
Energy & Environment
Theory of Machines – I
(Time: 09.00 am to 01.00 pm)
Strength of Materials
Electrical
Digital system & Microprocessor
43647
Civil
03/12/2015
Computer
Science &
Technology
Information
Technology
BioTechnology
Electronics &
Electrical
Engineering
Civil
Environmental
Friday
04/12/2015
Sub.Code.
Civil
Computer
Science &
Engineering
Thursday
Subject
Mechanical
43589
43604
9
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 4 Exam Dec 2015
Day & Date
Branch Name
Electronics Measurement & Instrumentation
43612
Chemical
Chemical Engg & Thermodynamics- I
Theory of Machines – I
(Time: 09.00 am to 01.00 pm)
Linear Integrated Circuits
43660
Electromagnetic Fields
43667
Software Engineering
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
43618
Software Engineering
43641
Molecular Biology
43653
Microprocessors and Peripherals
51188
Fluid & Turbo Machinery
43597
Automobile
Manufacturing Processes
43605
Electronics
Integrated Circuits & Applications
46644
Mechanical
Workshop Practice - IV
43599
Production
Workshop Practice - IV
43627
Instrumentation
Electronics &
TeleCommunication
04/12/2015
Saturday
05/12/2015
NA
NA
Sub.Code.
Electronics
Producation
Friday
Subject
Computer
Science &
Engineering
Information
Technology
BioTechnology
Electronics &
Electrical
Engineering
Mechanical
43625
43633
10
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 4 Exam Dec 2015
Second Year – Semester 4 (New Syllabus introduced from June 2014)
Time 10:00 a.m. to 01:00 p.m.
Day & Date
Monday
30/11/2015
Branch Name
Structural Mechanics
63344
Environmental
Water Resources Engineering
63506
Mechanical
Applied Numerical Methods
63360
Automobile
Computational Methods
63388
Electrical
DC Machines & Transformer
63374
Electronics
Electronic Circuit Analysis & Design –II
63441
Chemical
Chemistry- II
63428
Producation
Advanced Machine Tools & Processes
63480
Instrumentation
Electronics &
TeleCommunication
Digital system
63494
Analog Circuits-II
63466
Information
Technology
Bio-Technology
Aeronautical
Mechanical &
Automation
01/12/2015
Sub.Code.
Civil
Computer
Science &
Engineering
Tuesday
Subject
Automata Theory
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
Computer Network
Written : 10.00 am to 12.00 pm
Online : 12.30 pm to 01.30 pm
O M R : 01.30 pm to 02.30 pm
Biostatistics
63453
Aircraft Production Technology
64000
63531
63518
64015
Civil:
Strength of Materials
Surveying –II
Environmental:
Environmental Geology
63507
Mechanical:
Analysis of Mech Elements
63361
Automobile:
Kinematics of Machines
(Time: 09.00 am to 01.00 pm.)
63389
Electrical
Power Electronics
63375
Electronics:
Linear Integrated Circuits
63440
Chemical:
Process Calculations
63429
Production:
Foundry Technology
63479
Instrumentation:
Electronics & Electrical Measuring
Instruments
63493
Linear Integrated Circuits
63467
Computer Networks
63532
Electronics & Tele
Communication
Computer
Science
& Engineering
63345
Written- 10.00 am to 12.00 pm
Online- 12.30 pm to 01.30 pm
O M R- 01.30 pm to 02.30 pm
Computer Organization And Architecture
Information
Technology
Written- 10.00 am to 12.00 pm
Online- 12.30 pm to 01.30 pm
O M R-
63519
01.30 pm to 02.30 pm
11
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 4 Exam Dec 2015
Day & Date
Tuesday
01/12/2015
Branch Name
Unit Operations- 2
63454
Aeronautical
Engineering
Mechanical &
Automation
Engineering
Civil:
Material Science & Engineering
64001
63346
Environmental Hydraulics
63508
63362
Automobile:
Metallurgy & Metal Treatments
63390
Electrical
Power System – I
63376
Electronics:
Data Structures & Algorithms
63442
Heat Transfer
63430
Production:
Analysis of Machine Elements
63482
Instrumentation:
Network & Circuit Theory
63495
Electronics &
TeleCommunication:
Data Structure
63468
Information
Technology:
Biotechnology
Aeronautical
Engineering
Mechanical &
Automation
Engineering
03/12/2015
Concrete Technology
Fluid & Turbo Machinery
Computer
Science
& Engineering
Thursday
64016
Numerical Analysis
Mechanical:
Chemical:
02/12/2015
Sub.Code.
Bio-Technology
Environmental:
Wednesday
Subject
Computer Organization
Written- 10.00 am to
Online- 12.30 pm to
O M R- 01.30 pm to
Data Structures
Written- 10.00 am to
Online- 12.30 pm to
O M R- 01.30 pm to
12.00 pm
01.30 pm
02.30 pm
12.00 pm
01.30 pm
02.30 pm
Enzyme Technology
Applied Numerical Methods
63533
63520
63455
64002
Metrology And Quality Control
64017
Civil:
Building Design & Drawing
(Time: 09.00 am to 01.00 pm.)
63348
Environmental:
Structural Mechanics – I
63509
Mechanical:
Theory of Machines - I
(Time: 09.00 am to 01.00 pm.)
63363
Automobile:
Fluid Machinery
63391
Electrical
Network Analysis & Synthesis
63377
Electronics:
Digital System & Microprocessors
63443
Chemical:
Chemical Engineering Thermodynamics
63431
Production:
Welding Technology
63483
Instrumentation:
Statistical Methods in Instrumentation
63496
Electromagnetic Engineering
63469
Operating System - I
Written- 10.00 am to 12.00 pm
Online- 12.30 pm to 01.30 pm
O M R- 01.30 pm to 02.30 pm
63534
Electronics &
TeleCommunication:
Computer
Science
& Engineering
12
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
S.E. Sem. 4 Exam Dec 2015
Day & Date
Branch Name
Subject
Sub.Code.
Information
Technology
Theory of Computation
63521
Biotechnology
Metabolic Pathways
63457
Aeronautical
Engineering
Mechanical &
Automation
Engineering
Civil:
Electrical Electronics & Communications
Engineering
64003
Machine Tool Systems
64018
Fluid Mechanics –II
63347
Constuction Technology
63510
Mechanical
Machine Tools & Processes
63364
Automobile
Strength of Materials
63392
Electrical
Control System – I
63378
Electronics
Control System Engineering
63444
Chemical
Engineering Mathematics IV
63427
Production
Theory of Machines – I
(Time: 09.00 am to 01.00 pm.)
63481
Friday
Instrumentation
Fluid Flow & Heat Transfer
63497
04/12/2015
Electronics &
TeleCommunication
Analog Communication Systems
63470
Thursday
03/12/2015
Environmental
Computer
Science
& Engineering
Software Engineering
Written- 10.00 am to 12.00 pm
Online- 12.30 pm to 01.30 pm
O M R- 01.30 pm to 02.30 pm
63535
Information
Technology
Software Engineering
63522
Biotechnology
Molecular Biology
63456
Aeronautical
Engineering
Mechanical &
Automation
Engineering
Aerodynamics-I
63999
Theory of Machines
Time: 09.00 am to 01.00 pm.)
64019
64020
Saturday
05/12/2015
No Date
Mechanical &
Automation
Engineering
Fluid And Turbo Machinery
a) Mechanical
b) Production
e) Aeronautical
Engineering
Workshop Practice- IV
PracticalAircraft Prod.Tech. Lab
63367
63485
64006
13
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 5 Exam Dec 2015
Third Year – Semester 5 (Old Syllabus) (First Chance)
(Time 02:30 p.m. to 05:30 p.m.)
Day & Date
Branch Name
08/12/2015
Designs of Steel Structures
45536
Environmental
Waste Water Engineering
42958
Mechanical
Theory of Machines-II
45549
Automobile
Dynamics of Machines
45656
Electrical
Electromagnetic
45576
Electronics
Microprocessor Peripherals & Interfacing
Process Instrumentation & Instrumental
Methods of Analysis
Metallurgy-I
45589
Fiber Optics & Communication
45643
Microcontroller
45686
Computer Graphics
Written : 01.30 pm to 03.30 pm
Online : 04.00 pm to 05.00 pm
O M R : 05.00 pm to 06.00 pm
45601
Operating System - I
45672
Biological Thermodynamics
45698
Electric Machine-II
55792
Geo-technical Engineering-I
45537
Environmental
Urban & Rural Planning
42959
Mechanical
Heat & Mass Transfer
45550
Automobile
Heat & Mass Transfer
45657
Electrical
Power System Analysis
45577
Electronics
Analog Integrated Circuits & Applications
45590
Chemical
Computer Techniques in Chemical Engg.
45631
Producation
Theory of Machines-II
45616
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Advanced Control Systems
45644
Signals & Systems
45687
System Programming
45602
Computer Network
45673
Immunology
45699
Power Systems Analysis
55793
Producation
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Civil
Thursday
10/12/2015
Sub.Code.
Civil
Chemical
Tuesday
Subject
45630
45615
14
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 5 Exam Dec 2015
Day & Date
Branch Name
12/12/2015
Environmental Engineering-I
45540
Environmental
42962
Automobile
Green Building
Manufacturing Engineering
(Time 02.00 pm to 06.00 pm)
Principles of Design & Component Design
45658
Electrical
Digital Signal Processing
45580
Electronics
Control System Engineering
45593
Chemical
Chemical Equipment Design-I
45634
Producation
Metal Forming & Plastics Technology
45619
Instrumentation
Electronics &
TeleCommunication
Analytical Instrumentation
45647
Optical Communication & Net work
45690
Network Technologies
Written : 01.30 pm to 03.30 pm
Online : 04.00 pm to 05.00 pm
O M R : 05.00 pm to 06.00 pm
45605
Organizational Management & Behavior
45676
Bioinformatics
45702
Electromagnetic Engg.
55794
Machine Design-I
45551
Production
Computer
Science &
Engineering
Civil
Metrology
45620
Computer Network Concepts
40016
Water Resources Engg.-I
45538
Environmental
Water Resources Engineering
42960
Mechanical
Control Engineering (MOD
48709
Automobile
Metrology & Quality Control
45659
Electrical
Instrumentation Techniques
45578
Electronics
Digital System Design
45591
Chemical
Mass Transfer-I
45632
Production
Design of Machine Elements
45617
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information &
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Industrial Power Electronics
45645
Antennas and Wave Propagation
45688
Operating System-I
45603
Object Oriented Modeling and Design
45674
Fermentation Technology
45700
Control System
55795
Computer
Science &
Technology
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Mechanical
Tuesday
15/12/2015
Thursday
17/12/2015
Sub.Code.
Civil
Mechanical
Saturday
Subject
45565
15
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 5 Exam Dec 2015
Day & Date
Saturday
19/12/2015
Branch Name
Subject
Sub.Code.
Civil
Concrete Technology
45539
Environmental
Environmental Geotechnology
42961
Mechanical
Metrology & Quality Control
45564
Automobile
Automotive Transmission
45660
Electrical
Feedback Control Systems
45579
Electronics
Electromagnetic Engineering
45592
Chemical
Chemical Engg. Thermodynamics-II
45633
Producation
Metal Cutting Technology
45618
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Unit Operation
45646
Linear Integrated Circuits
45689
Computer Algorithms
45604
System Software
45675
Genetic Engineering
45701
Power Electronics
55796
16
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 5 Exam Dec 2015
Third Year – Semester 5
(New Syllabus introduced from June 2015)
(Time 02:30 p.m. to 05:30 p.m.)
Day & Date
Branch Name
Water Resource Engineering-I
66235
Environmental
Water Supply Engineering
66268
Mechanical
Control Engineering
66241
Automobile
Dynamics of Machines
66256
Electrical
Digital Electronics and Miscrocontroller
66250
Electronics
Signal and Systems
Process Instru & Instrumental Methods
Analysis
Metallurgy
66280
66274
Power Electronics
66263
Antenna and Wave Propagation
66314
Production
08/12/2015
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Aeronautical
Mechanical &
Automation
Civil
Thursday
10/12/2015
Sub.Code.
Civil
Chemical
Tuesday
Subject
Computer Graphics
Written : 01.00 pm to 03.00 pm
Online : 03.30 pm to 04.30 pm
Operating System-I
Written : 01.00 pm to 03.00 pm
Online : 03.30 pm to 04.30 pm
Bioprocess Calculations
66286
66293
66300
66307
No Change (Subject continued of old course)
Aircraft Structures
66320
Non Conventional Energy Sources
66440
Design of Steel Structures
66236
Environmental
Engineering Management and Economics
66269
Mechanical
Theory of Machine - II
66242
Automobile
Hydraulics and Pneumatics
66257
Electrical
AC Machines
66251
Electronics
Microcontroller
66281
Chemical
Computational Techniques in Chemical Engg
66275
Production
Theory of Machines-II
66287
Instrumentation
Electronics &
TeleCommunication
Process Control
66264
Control Systems
66315
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Database Engineering
Written : 01.00 pm to 03.00 pm
Online : 03.30 pm to 04.30 pm
Biological Thermodynamics
66301
66308
No Change (Subject continued of old course)
17
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 5 Exam Dec 2015
Day & Date
Branch Name
Subject
Sub.Code.
Thursday
Aeronautical
Aerodynamics-II
66321
10/12/2015
Mechanical &
Automation
Microprocessors and Applications
66441
Civil
Environmental Engineering-I
66237
Mechanical
Transportation Engineering and Town
Planning
Heat and Mass Transfer
Automobile
Automotive Chassis
66258
Electrical
Power Systems II
66252
Electronics
Electromagnetic Engineering
66282
Chemical
Mass Transfer-I
66276
Producation
Design of Machine Elements
66288
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
BioTechnology.
Electronics &
Electrical
Engineering
Aeronautical
Mechanical &
Automation
Civil
Biomedical Instrumentation
66265
Signals and Systems
66316
Object Oriented Modeling and Design
Written : 01.00 pm to 03.00 pm
Online : 03.30 pm to 04.30 pm
66295
Computer Algorithms
66302
Fermentation Technology-I
66309
Environmental
Saturday
12/12/2015
Tuesday
15/12/2015
17/12/2015
66243
No Change (Subject continued of old course)
Aerospace Propulsion-I
66322
Machine Design -I
66442
Geotechnical Engineering - I
66238
Environmental
Geotechnical Engineering
66271
Mechanical
Machine Design - I
66244
Automobile
Metrology & Quality Control
66259
Electrical
Control System II
66253
Electronic
VLSI Design
66283
Chemical
Chemical Engg Thermodynamics-II
66277
Producation
Metrology
66289
Instrumentation
Electronics &
TeleCommunication
Mechanical &
Automation
Civil
Automatic Control System
66266
Power Electronics
66317
Database Management Systems
66443
Transportation Engineering-I
66239
Building Planning & Desing
Manufacturing Engineering
66272
Environmental
Thursday
66270
Mechanical
(Time 01.30 pm to 05.30 pm)
66245
Automobile
Heat and Mass Transfer
66260
Electrical
Signals and System
66254
Electronics
Digital Communication
66284
18
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 5 Exam Dec 2015
Day & Date
Thursday
17/12/2015
Saturday
19/12/2015
Branch Name
Subject
Sub.Code.
Chemical
Chemical Equipment Design-I
66278
Production
Metal Forming & Plastics Engg
66290
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Aeronautical
Mechanical &
Automation
Automobile
Microcontroller and Application
66267
Digital Communication
66318
Network Technologies
Written : 01.00 pm to 03.00 pm
Online : 03.30 pm to 04.30 pm
66297
Application Development Tool-I
66305
Bioinformatics
66311
No Change (Subject continued of old course)
Air Transportation Systems
66324
Material Science and Metallurgy
66444
Industrial Org and Engg Economics
66261
Production
Metal Cutting Theory
66291
Bio-Technology
Immunology
66312
19
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 6 Exam Dec 2015
Third Year – Semester 6
(Time 02:30 p.m. to 05:30 p.m.)
Day & Date
Tuesday
01/12/2015
Branch Name
02/12/2015
Thursday
03/12/2015
Sub.Code.
Civil
Structural Mechanic-III
45542
Environmental
Air Pollution-I
43683
Mechanical
Machine Design -II
45568
Automobile
Automotive Component Manufacturing
45664
Electrical
Powar System Stebility and Control
45583
Electronics
Microcontrollers
Industrial Economics, Management &
Entrepreneurship
Metallurgy-II
45595
45636
Chemical
Production
45622
Instrumentation
Electronics &
TeleCommunication
Information
Technology
Microcontroller & Applications
45649
Digital Signal Processing
45692
Database Engineering
45679
Bio-Technology
Industrial Economics, Management &
Entrepreneurship
45709
Power System Stability & Control
55798
Civil
Geotechnical Engineering-II
45543
Environmental
Solid Waste Management
43684
Mechanical
Renewable Energy Engineering
45569
Automobile
Industrial Organization & Management
45665
Electrical
Control System Design
45584
Electronics
Digital Communication
45596
Chemical
Plant Utility & Pollution Control
45637
Production
Industrial Management
45623
Instrumentation
Electronics &
TeleCommunication
Industrial Automation-I
45650
Digital Communication
45693
Operating System-II
45609
Operating System-II
45680
Electrical Drives and Control
55799
Engineering Management
45544
Environmental
Environmental Management
43685
Mechanical
I.C. Engines
45570
Automobile
I.C. Engines
45666
Electronics &
Electrical
Engineering
Wednesday
Subject
Computer
Science &
Engineering
Information
Technology
Electronics &
Electrical
Engineering
Civil
20
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 6 Exam Dec 2015
Day & Date
Thursday
03/12/2015
Branch Name
Power Electronics
45585
Electronics
Power Electronics
45597
Chemical
Mass Transfer-II
45638
Production
Industrial Hydraulics and Pneumatics
45624
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Civil
Process Control
45651
VLSI Design
45694
Database Engineering
45610
Software Testing and Quality Assurance
45681
Bio Instrumentation
45705
Microcontroller and ITS Applications
55800
Water Resource Engineering-II
45545
Environmental
Noise Pollution Control
43686
Mechanical
Industrial Fluid Power
45571
Automobile
Automotive Chassis
45667
Electrical
Microcontroller & Its Applications
45586
Electronics
Digital Signal Processing
45598
Chemical
Process Dynamics & Control
Design of Jigs Fixtures and Dies
(Time 01.30 pm to 05.30 pm)
Signals & Systems
45639
Industrial & Power Electronics
45695
Object Oriented Modeling and Design
Written : 01.30 pm to 03.30 pm
Online : 04.00 pm to 05.00 pm
O M R : 05.00 pm to 06.00 pm
45611
Internet Technology
45682
Medical Bio Technology
45706
Communication Engineering
55801
45546
Mechanical
Environmental Engineering-II
Quality Surveying & Valuation
(Time 01.30 pm to 05.30 pm)
Computer Integrated Manufacturing
45572
Automobile
Vehicle Body Engineering
45668
Electrical
Communication Engineering
45587
Electronics
Industrial Management & Operation Research
45599
Chemical
Chemical Reaction Engineering-I
45640
Production
Quality Management
45626
Instrumentation
Industrial Management
45653
Production
04/12/2015
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Civil
Environmental
05/12/2015
Sub.Code.
Electrical
Friday
Saturday
Subject
45625
45652
43687
21
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
T.E. Sem. 6 Exam Dec 2015
Day & Date
Saturday
05/12/2015
Branch Name
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Mechanical
Subject
Sub.Code.
Industrial Management & Operation
Research
45696
Information Security
45612
Information System Security
45683
Drug Development and Gene Therapy
45708
Digital Signal Processing
55802
Industrial Management Operation Research
45573
Monday
Automobile
Hydraulics & Pneumatics
45669
07/12/2015
Production
45627
45628
NA
Mechanical
Machine Tools & Product Design
Compiler Construction
Written : 01.30 pm to 03.30 pm
Online : 04.00 pm to 05.00 pm
O M R : 05.00 pm to 06.00 pm
Workshop Practice - VI
NA
Production
Workshop Practice - VI
Computer
Science &
Engineering
45608
45574
22
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
B.E. Sem 7 Exam Dec 2015
Final Year – Semester 7
(Time Time 10:00 a.m. to 01:00 p.m.)
Day & Date
Branch Name
Subject
Sub.Code.
Civil
Design of Concrete Structure-I
47901
Environmental
Industrial Waste Treatment
45953
Mechanical
Refrigeration & Air Conditioning
47979
Automobile
Engine & Machine Design
47864
Electrical
Electrical Drives and Control
47935
Electronics
Embedded System Design
47946
Chemical
Chemical Reaction Engg.-II
47888
Tuesday
Production
Operation Research
47993
08/12/2015
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Civil
Advanced Process Instrumentation
47961
Computer Communication Network
47926
Advanced Computer Architecture
47917
Mobile Technology
47971
Bio reaction Engineering
47876
Switchgear & Protection
59361
Transportation Engineering
47904
Environmental
Air Pollution – II
45952
Mechanical
Mechanical System Design
47980
Automobile
Vehicle Dynamics
47865
Electrical
High Voltage Engineering
47936
Electronics
Power Electronics and Drives
47947
Chemical
Chemical Process & Synthesis
47889
Thursday
Production
Mechatronic Systems
47994
10/12/2015
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Instrumentation System Design
47962
Wireless Communication
47927
Distributed System
47918
Advanced Database Systems
47972
Protein Engineering
47877
Control System Design
59362
23
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
B.E. Sem 7 Exam Dec 2015
Day & Date
Branch Name
45956
45958
45959
47983
Automobile Engineering
47984
Computer Aided Design & Analysis
47997
FACTS
59363
Advanced Structural Analysis
Experimental Stress Analysis
Finite Element Method
Advanced Foundation Engineering
Transportation Infrastructure Planning and
Demand Estimation
Advanced Engineering Geology
Open Channel Hydraulics
Human Resource Development
Project Appraisal
Solid Waste Management
Total Quality Management
47905
47906
47907
47908
Industrial Product Design
47988
Automobile
Energy Engineering
47869
Elective I
Production Management
47872
Electrical
FACTS
Digital Control System
Electrical Engineering Materials
Fiber Optic Communication
Satellite Communication
Biomedical Instrumentation
Digital Image Processing
Real Time Systems
Petroleum Refinery Engineering
47939
47940
47942
47950
47951
47952
47955
47956
47892
Bio-Technology
47893
Neural & Fuzzy Based Control
47966
Electronics &
TeleCommunication
Elective I
Satellite Communication
47932
Digital Signal Processors
47930
Computer
Science &
Engineering
Elective I
Soft Computing
47921
Project Management
47922
Cyber Laws
Project Management
47923
47976
Cyber Laws
47977
Elective I
Mechanical
Elective I
12/12/2015
Production
Electronics &
Electrical
Engineering
Civil
Elective I
Tuesday
Mechanical
Elective II
15/12/2015
Elective I l
Electronics
Elective I
Chemical
Elective I
Instrumentation
Elective I
Thursday
17/12/2015
Sub.Code.
Optimization Techniques
Disaster Planning & Risk Analysis
Clean Development Mechanism
Noise & Vibration
Environmental
Saturday
Subject
Information
Technology
Elective I
Biomedical Engineering
Bio-Technology
Elective I
Good Manufacturing
Plant Biotechnology
47909
47910
47911
47912
47913
47914
47986
47880
47882
47881
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
24
Draft Programme
FE to BE (All Branches)
B.E. Sem 7 Exam Dec 2015
Day & Date
Thursday
17/12/2015
Branch Name
Subject
Sub.Code.
Electronics &
ical Engineering
EHVAC
59365
Environmental
Quantity Survey and Valuation
(Time 02.00 pm to 06.00 pm)
Advanced Water & Wastewater Treatment
45954
Mechanical
Finite Element Analysis
47981
Automobile
Finite Element Analysis
47866
Electrical
Advanced Switchgear and Protection
47937
Electronics
Video Engineering
Chemical Process Design
(Time 02.00 pm to 06.00 pm)
Process Engineering
47948
47995
Industrial Automation-II
47963
Microwave Engineering
47928
Advanced Database System
47919
Real Time Systems
47973
Pharmaceutical Biotechnology
47878
Industrial Management and Economics
59364
Earthquake Engineering
47903
Environmental
Environmental Impact Assessment
45955
Mechanical
Elective-I Experimental Mechanics
47982
Automobile
Alternative Fuels & Emission
47867
Electrical
Renewable Energy Sources
47938
Electronics
Information Theory & Coding
47949
Chemical
Modeling & Simulation in Chemical Engg.
47891
Production
Production & Operations Management
47996
Instrumentation
Electronics &
TeleCommunication
Bio-Technology
Digital Signal Processing
47964
Embedded System
47929
Bioprocesses
47879
Civil
Chemical
Saturday
19/12/2015
Tuesday
22/12/2015
Production
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Civil
47902
47890
25
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
Sem. 8 Exam Dec 2015
Final Year – Semester 8
(Time Time 10:00 a.m. to 01:00 p.m.)
Day & Date
Monday
30/11/2015
Tuesday
01/12/2015
Branch Name
Subject
Sub.Code.
Civil
Town Planning & Transport ting Engineering
49173
Environmental
Environmental Management System
46422
Mechanical
Mechatronics
49417
Automobile
Refrigeration and Air Conditioning
49499
Electrical
Electrical Utilization & Transaction
49428
Electronics
Computer Network
49434
Chemical
Chemical Process & Green Technology
49473
Production
Costing and Cost Control
49455
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Civil
Field Instrumentation & Network
49491
Audio & Video Engineering
49516
Grid Technology
49447
Distributed Computing
49509
Bio separation Processes
49524
Electrical Machine Design
59501
Construction Practice
49174
Environmental
Environmental Policy & Legislation
46423
Mechanical
Industrial Engineering
49418
Automobile
Automotive Electronics
49500
Electrical
HVDC System
49429
Electronics
Operating System
49435
Chemical
Transport Phenomena
49474
Production
Computer Integrated Manufacturing System
49456
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Process Modeling & Simulation
49492
Broadband Communication
49517
Storage Networks
49448
Electronics &
Electrical
Engineering
Information Technology & Business
Methodology
Bioprocess Modeling and Simulation
49525
Utilization & Energy Conservation
59502
49510
26
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
Sem. 8 Exam Dec 2015
Day & Date
Branch Name
02/12/2015
Design of Concrete Structure - II
49175
Environmental
Industrial Health & Safety
46424
Mechanical
Power Engineering
49419
Automobile
49501
Electronics
Automotive System Design
Electrical Initialization, Testing and
Maintenance
Microwave Engineering
49436
Chemical
P.E.P.E.
49475
Production
Advanced Industrial Engineering
49457
Instrumentation
Electronics &
TeleCommunication
Computer
Science &
Engineering
Information
Technology
Bio-Technology
Electronics &
Electrical
Engineering
Project Planning Estimation & Assessment
49493
Image Processing
49518
Real Time Operating System
49449
Storage Network
49511
Bioprocess Engineering & Economics
49526
Embedded Systems
59503
Advance Concrete Design
Structural Design of Foundation and
Retaining Structures
Pavement Analysis, Design and Evaluation
Remote sensing applications in civil
engineering
Site investigation methods and practices
49176
49180
Entrepreneurships
49184
Air Pollution & Control
49185
Hazardous Waste Management
46425
Production Management
49420
MEMS
49421
Machine Tools Design
49422
Computational Fluide Dynamics
49423
Vehicle Performance
49502
EHVAC
49431
Electrical
Advanced Digital Signal Processing
49535
Elective II
Restructured Power System
49536
Electrical Power Quality and Harmonics
58698
Broad Band Communication
49437
Wireless Communication Network
49438
Biomedical Control & Instrumentation
49439
System On Chip
49442
Mechatronics
49443
Civil
Elective II
Environmental
Thursday
03/12/2015
Sub.Code.
Civil
Electrical
Wednesday
Subject
Mechanical
Elective III
Automobile
Electronics
Elective II
49430
49179
49181
49183
27
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
Sem. 8 Exam Dec 2015
Day & Date
Branch Name
49476
Petrochemical Technology
49477
Distillation
49479
Marketing Management
49458
Metarial Management
49459
Entrepreneurship Development
49461
Financial Management
49462
Instrumentation
Elective II
Power Plant Instrumentation
49494
Biomedical Instrumentation
49495
Electronics &
TeleCommunication
Elective II
Speech Processing
49519
Mobile Communication
49521
Real Time Systems
49522
Data Mining
49451
Adhoc Wireless Network
49452
Business Intelligence System
49453
Introduction to Mainframes
58286
Business Intelligent System
49513
ANN & Genetic Algorithm
49514
Animal Biotechnology
49527
HVDC
59504
Design of Bridges
49187
Project Planning, Economics and Financing
49190
Production
Elective I
03/12/2015
Computer
Science &
Engineering
Elective II
Information
Technology
Elective II
Bio-Technology
Electronics &
Electrical
Engineering
Friday
4/12/2015
Sub.Code.
Bio-Chemical Engineering
Chemical
Elective II
Thursday
Subject
Rock Mechanics
49191
Civil
Water Power Engineering
49192
Elective III
Advance Construction Techniques
49193
Optimization technique
49413
Industrial Waste Treatment
49414
Ground Improvement
49189
Environmental
Managerial Techniques
46426
Environmental
Watershed Management
46427
Environmental
Environmental Modeling & Simulation
46428
Industrial Automation and Robotics
49546
Enterprise Resource Planning
49424
Cryogenics
49425
P.I.C. & SCADA Programming
49426
Automobile
Elective III
Transport Management
49503
Tractor and Farm Equipment
49505
Chemical
Elective II
Energy Conservation and Recovery
49484
Pharmaceutical Technology-II
49486
Mechanical
Elective IV
28
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Draft Programme
FE to BE (All Branches)
Sem. 8 Exam Dec 2015
Day & Date
Friday
4/12/2015
Branch Name
Production
Elective II
Bio-Technology
Elective II
Subject
Sub.Code.
Flexible Manufacturing Systems
49465
Industrial Robotics
49467
Material Handling System
49469
Applied Genetic Engineering
49528
Food & Dairy Techonology
49529
NOTE:
1) The candidates are permitted to use stencils at the Examination.
2) The candidates for examination are expected to provide themselves with Slide Rules.
3) The exchange or loan of slide rules, drawing instruments or other material used in
the examination is not permitted while the examination is in progress. Candidates
must bring their own instruments.
4) The candidates are allowed to use the electronic calculators for numerical
calculations at their own cost. University will not supply such calculators.
5) The Practical and Oral Examinations will take place before starting of the theory
examination. The examiners will notify the day, date and place on the notice Board
of the concerned Colleges.
Students must be present at the time and place
appointed for their practical examination. Those who fail to present themselves at
the appointed time and place will not be examined in Practical and oral.
6) The Examination Programme is subject to change. If there is any change in the
programme of the examination, it will be communicated in time, however the
University is not responsible for any loss or inconvenience caused to the candidate.
7) The seating arrangement is made date-wise & subject-wise; therefore candidates
are requested to see their seating arrangement one day before the date of
Examination.
8) All the students should verify the customized time table printed on their hall ticket
with the final programme sent to their college (also available at our web site) at
least two days prior to the date of examinations. If any mistake in hall ticket, Time
table Programme will be final.
9) The cellular Phone, Pager, Scientific Calculator, Digital Diary or any means, which
can be used for unfair practices, are not allowed in the examination hall.
Date: 10th September, 2015.
Shivaji University,
Vidyanagar,
KOLHAPUR - 416 004.
Sd/Shri. M.A. Kakade
Controller of Examinations
29
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com