Assignment – 2
ETCS-210 COMPUTER GRAPHICS
B.Tech (CSE)- 2nd Year (S2 and S14)
Last Date: 1st Apr. 2013
Note: All output diagrams must be shown in GRAPH COPY.
0 0 2 1 A
2 0 2 1 B


2 1 2 1 C


1 2 2 1 D
0 2 2 1 E
[X ]  

0 0 0 1 F
2 0 0 1 G


2 2 0 1 H
0 2 0 1 I


2 2 1 1 J
Q1. What should be the output diagram while the object [X] is rotated by -45° about the
local axis passing through point F (i.e. arbitrary point). Diagram must be shown in
graph copy.
Q2. Develop an auxiliary view showing the true shape of the triangular corner for the [X]
object. Diagram must be shown in graph copy.
Q3. Develop the trimetric view of the object [X] if the angle is formed by a  = 30°
rotation about the y-axis, followed by a  = 45° rotation about x-axis then plane of
projection onto the z=0 plane. Diagram must be shown in graph copy.
Q4. Develop the dimetric view of the object [X] if the foreshortening factor along z-axis
of ½. Diagram must be shown in graph copy.
Q5. Develop the trimetric view of the object [X]. Diagram must be shown in graph copy.
Q6. Determined the [X*] for an oblique projection (i.e. CAVALIER) if = -45° and +45°
with β = 45°. What effect will be on the [X*] if  will be as same as above but f =0.5
(i.e. CABINET). Plot the diagram also in GRAPH COPY.
Q7. Perform a perspective projection onto the z=0 plane of the [X] from the center of
projection Zc=10 on the z-axis. What will be effects while we translate it to the center
and then perform the same perspective projection? Plot all diagram in your graph
copy also.
Q8. Perform a perspective projection onto the z=0 plane of the [X] from the center of
projection at x= - 10 on the x-axis and y= -10 on the y-axis. What will be effects
while we translate it to the center and then perform the same perspective projection?
Plot all diagram in your graph copy also.
Q9. Perform a perspective projection onto the z=0 plane of the [X] from the center of
projection at x= - 10 on the x-axis, y= -10 and z= 10 on the y-axis. What will be
effects while we translate it to the center and then perform the same perspective
projection? Plot all diagram in your graph copy also.
For any query you may contact [email protected] or 9968760807 after 28/3/13