XIII
List of Authors
Jonathan D. Almer
Argonne National Laboratory
9700 South Cass Avenue
Argonne, IL 60439, USA
e-mail: [email protected]
Archie A.T. Andonian
The Goodyear Tire & Rubber Co.
D/410F 142 Goodyear Boulevard
Akron, OH 44305, USA
e-mail: [email protected]
Satya N. Atluri
University of California
Department of Mechanical & Aerospace
Engineering, Center for Aeorspace Research
& Education
5251 California Avenue, Suite 140
Irvine, CA 92612, USA
David F. Bahr
Washington State University
Mechanical and Materials Engineering
Pullman, WA 99164, USA
e-mail: [email protected]
Chris S. Baldwin
Aither Engineering, Inc.
4865 Walden Lane
Lanham, MD 20706, USA
e-mail: [email protected]
Stephen M. Belkoff
Johns Hopkins University
International Center for Orthopaedic
Advancement, Department of Orthopaedic
Surgery, Bayview Medical Center
5210 Eastern Avenue
Baltimore, MD 21224, USA
e-mail: [email protected]
Hugh Bruck
University of Maryland
Department of Mechanical Engineering
College Park, MD 20742, USA
e-mail: [email protected]
Ioannis Chasiotis
University of Illinois at Urbana-Champaign
Aerospace Engineering
Talbot Lab, 104 South Wright Street
Urbana, IL 61801, USA
e-mail: [email protected]
Gary Cloud
Michigan State University
Mechanical Engineering Department
East Lansing, MI 48824, USA
e-mail: [email protected]
Wendy C. Crone
University of Wisconsin
Department of Engineering Physics
1500 Engineering Drive
Madison, WI 53706, USA
e-mail: [email protected]
James W. Dally
University of Maryland
5713 Glen Cove Drive
Knoxville, TN 37919, USA
e-mail: [email protected]
James F. Doyle
Purdue University
School of Aeronautics & Astronautics
West Lafayette, IN 47907, USA
e-mail: [email protected]
Igor Emri
University of Ljubljana
Center for Experimental Mechanics
Cesta na brdo 85
Lubljana, SI-1125, Slovenia
e-mail: [email protected]
Yimin Gan
Universität GH Kassel
Fachbereich 15 – Maschinenbau
Mönchebergstr. 7
34109 Kassel, Germany
e-mail: [email protected]
XIV
List of Authors
Ashok Kumar Ghosh
New Mexico Tech
Mechanical Engineering and Civil Engineering
Socorro, NM 87801, USA
e-mail: [email protected]
Peter G. Ifju
University of Florida
Mechanical and Aerospace Engineering
Gainesville, FL 32611, USA
e-mail: [email protected]
Richard J. Greene
The University of Sheffield
Department of Mechanical Engineering
Mappin Street
Sheffield, S1 3JD, UK
e-mail: [email protected]
Wolfgang G. Knauss
California Institute of Technology-GALCIT 105-50
1201 East California Boulevard
Pasadena, CA 91125, USA
e-mail: [email protected]
Bongtae Han
University of Maryland
Mechanical Engineering Department
College Park, MD 20742, USA
e-mail: [email protected]
Albert S. Kobayashi
University of Washington
Department of Mechanical Engineering
Seattle, Washington 98195-2600, USA
e-mail: [email protected]
M. Amanul Haque
Pennsylvania State University
Department of Mechanical Engineering
317A Leonhard Building
University Park, PA 16802, USA
e-mail: [email protected]
Sridhar Krishnaswamy
Northwestern University
Center for Quality Engineering & Failure Prevention
Evanston, IL 60208-3020, USA
e-mail: [email protected]
Craig S. Hartley
El Arroyo Enterprises LLC
231 Arroyo Sienna Drive
Sedona, AZ 86332, USA
e-mail: [email protected]
Roger C. Haut
Michigan State University
College of Osteopathic Medicine, Orthopaedic
Biomechanics Laboratories
A407 East Fee Hall
East Lansing, MI 48824, USA
e-mail: [email protected]
Jay D. Humphrey
Texas A&M University
Department of Biomedical Engineering
335L Zachry Engineering Center, 3120 TAMU
College Station, TX 77843-3120, USA
e-mail: [email protected]
Yuri F. Kudryavtsev
Integrity Testing Laboratory Inc.
PreStress Engineering Division
80 Esna Park Drive
Markham, Ontario L3R 2R7, Canada
e-mail: [email protected]
Pradeep Lall
Auburn University
Department of Mechanical Engineering
Center for Advanced Vehicle Electronics
201 Ross Hall
Auburn, AL 36849-5341, USA
e-mail: [email protected]
Kenneth M. Liechti
University of Texas
Aerospace Engineering and Engineering Mechanics
Austin, TX 78712, USA
e-mail: [email protected]
List of Authors
Hongbing Lu
Oklahoma State University
School of Mechanical and Aerospace Engineering
218 Engineering North
Stillwater, OK 74078, USA
e-mail: [email protected]
Ian McEnteggart
Instron
Coronation Road, High Wycombe
Buckinghamshire, HP12 3SY, UK
Dylan J. Morris
National Institute of Standards and Technology
Materials Science and Engineering Laboratory
Gaithersburg, MD 20877, USA
e-mail: [email protected]
Sia Nemat-Nasser
University of California
Department of Mechanical and Aerospace
Engineering
9500 Gilman Drive
La Jolla, CA 92093-0416, USA
e-mail: [email protected]
Wolfgang Osten
Universität Stuttgart
Institut für Technische Optik
Pfaffenwaldring 9
70569 Stuttgart, Germany
e-mail: [email protected]
Eann A. Patterson
Michigan State University
Department of Mechanical Engineering
2555 Engineering Building
East Lansing, MI 48824-1226, USA
e-mail: [email protected]
Daniel Post
Virginia Polytechnic Institute and State University
(Virginia Tech)
Department of Engineering Science and Mechanics
Blacksburg, VA 24061, USA
e-mail: [email protected]
Ryszard J. Pryputniewicz
Worcester Polytechnic Institute
NEST – NanoEngineering, Science, and Technology
CHSLT – Center for Holographic Studies and Laser
Micro-Mechatronics
Worcester, MA 01609, USA
e-mail: [email protected]
Kaliat T. Ramesh
Johns Hopkins University
Department of Mechanical Engineering
3400 North Charles Street
Baltimore, MD 21218, USA
e-mail: [email protected]
Krishnamurthi Ramesh
Indian Institute of Technology Madras
Department of Applied Mechanics
Chennai, 600 036, India
e-mail: [email protected]
Krishnaswamy Ravi-Chandar
University of Texas at Austin
1 University Station, C0600
Austin, TX 78712-0235, USA
e-mail: [email protected]
Guruswami Ravichandran
California Institute of Technology
Graduate Aeronautical Laboratories
Pasadena, CA 91125, USA
e-mail: [email protected]
Robert E. Rowlands
University of Wisconsin
Department of Mechanical Engineering
1415 Engineering Drive
Madison, WI 53706, USA
e-mail: [email protected]
Taher Saif
University of Illinois at Urbana-Champaign
Micro and Nanotechnology Laboratory, 2101D
Mechanical Engineering Laboratory
1206 West Green Street
Urbana, IL 61801, USA
e-mail: [email protected]
Wolfgang Steinchen (deceased)
XV
XVI
Jeffrey C. Suhling
Auburn University
Department of Mechanical Engineering
201 Ross Hall
Auburn, AL 36849-5341, USA
e-mail: [email protected]
Michael A. Sutton
University of South Carolina
Center for Mechanics, Materials and NDE
Department of Mechanical Engineering
300 South Main Street
Columbia, SC 29208, USA
e-mail: [email protected]
Robert B. Watson
Vishay Micro-Measurements
Sensors Engineering Department
Raleigh, NC, USA
e-mail: [email protected]
Robert A. Winholtz
University of Missouri
Department of Mechanical and Aerospace
Engineering
E 3410 Lafferre Hall
Columbia, MO 65211, USA
e-mail: [email protected]